Manual de instrucciones de Humminbird PIRANHAMAX 180

Manual de instrucciones del aparato Humminbird PIRANHAMAX 180

Aparato: Humminbird PIRANHAMAX 180
Categoría: Detector de peces
Fabricante: Humminbird
Tamaño: 1.11 MB
Fecha de añadido: 5/18/2014
Número de páginas: 52
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Humminbird PIRANHAMAX 180. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Humminbird PIRANHAMAX 180.

Para tu comodidad

Si ver los manuales de instrucción de Humminbird PIRANHAMAX 180 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Humminbird PIRANHAMAX 180 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Humminbird PIRANHAMAX 180 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Humminbird PIRANHAMAX 180 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 52 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Humminbird PIRANHAMAX 180, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Humminbird PIRANHAMAX 180. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

PiranhaMAX™150,160,170,180,190c
PiranhaMAX™150,160,170,180,190c
I In ns st ta alllla at tiio on n a an nd d O Op pe er ra at tiio on ns s M Ma an nu ua all
531678-1_B

Resumen del contenido incluido en la página 2

Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy-free of charge during the first year after purchase,and available at a reasonable rate after the one-year

Resumen del contenido incluido en la página 3

WEEE DIRECTIVE: EU Directive 2002/96/EC “Waste of Electrical and Electronic Equipment Directive (WEEE)” impacts most distributors, sellers, and manufacturers of consumer electronics in the European Union. The WEEE Directive requires the producer of consumer electronics to take responsibility for the management of waste from their products to achieve environmentally responsible disposal during the product life cycle. WEEE compliance may not be required in your location for electrical & electronic

Resumen del contenido incluido en la página 4

Table of Contents Installation Overview 1 Control Head Installation 2 Determine Where to Mount .............................................................................. 2 Connect the Power Cable to the Boat .............................................................. 2 Assembling the Control Head Base ............................................................ 4 Routing the Control Head Cables Under the Deck .................................... 5 Attaching the Control Head to the Base ..

Resumen del contenido incluido en la página 5

Table of Contents The Menu System 30 Light (Setting Not Saved in Memory) ........................................................ 30 Sensitivity (Setting Saved in Memory) ...................................................... 30 Depth Range (Setting Not Saved in Memory) .......................................... 31 Zoom (Setting Not Saved in Memory)........................................................ 31 Chart Speed (Setting Saved in Memory) ..................................................

Resumen del contenido incluido en la página 6

Resumen del contenido incluido en la página 7

Installation Overview Installation Overview Before you start installation, we encourage you to read these instructions carefully in order to get the full benefit from your PiranhaMAX™. There are three basic installation tasks that you must perform for the PiranhaMAX™: • Installing the control head • Installing the transducer • Testing the complete installation and locking the transducer position. 1

Resumen del contenido incluido en la página 8

Control Head Installation Control Head Installation Determine Where to Mount Begin the installation by determining where to mount the control head. Consider the following to determine the best location: • To check the location planned for the control head, test run the cables for the power and transducer. See the installation section for your transducer type in order to plan the location of the transducer. • The mounting surface should be stable enough to protect the control head from Figure 1 e

Resumen del contenido incluido en la página 9

Control Head Installation NOTE: Humminbird® is not responsible for over-voltage or over-current failures. The control head must have adequate protection through the proper selection and installation of a 1 amp fuse. 1a. If a fuse terminal is available, use crimp-on type electrical connectors (not included) that match the terminal on the fuse panel. Attach the black wire to ground (-), and the red wire to positive (+) 12 VDC power (Figure 3). GR GROUND OUND Install a 1 amp fuse (not included) for

Resumen del contenido incluido en la página 10

Control Head Installation Assembling the Control Head Base Your control head base will either have a tilt mount or a tilt and swivel mount. Refer to procedures A or B below to assemble and mount the control head base. A. If you have a tilt mount, follow these steps: 1. Set the tilt mount control head base in place on the mounting surface. Mark the four mounting screw locations with a pencil or punch. 2. Set the base aside, and drill the four mounting screw holes using a 9/64" bit. 3. Proceed to

Resumen del contenido incluido en la página 11

19 mm /4” 3 Control Head Installation Routing the Control Head Cables Under the Deck Use the following steps to route the control head cables under the deck. NOTE: Under the deck cable routing is not always possible. If this is not an option, the cables should be routed and secured above deck. NOTE: See the installation section for your transducer type in order to plan the location of the transducer and cable route. Tilt Mount or Tilt and Swivel Mount Tilt Mount or Tilt and Swivel Mount: Control

Resumen del contenido incluido en la página 12

Control Head Installation Attaching the Control Head to the Base Follow these steps to attach the control head to the already-assembled base: NOTE: The transducer cable and power cable should be routed prior to securing the mounting bracket to the deck. 1. Apply marine-grade silicone sealant to the drilled holes for the mounting bracket. 2. Place the mounting bracket on the mounting surface, aligning with the drilled holes. 3. Insert the four #8 Phillips countersink wood screws into the mounting

Resumen del contenido incluido en la página 13

Control Head Installation Attaching the Cables to the Control Head Follow these steps to attach the power and transducer cables to the control head: 1. Matching the cable plugs to the shape and orientation of the sockets, insert the transducer and power cables into the correct sockets on the control head (Figure 8). Power Temperature Transducer 2. With the control head in place, tilt Figure 8 and/or swivel the unit through its full range to make sure there is enough cable slack for the unit to m

Resumen del contenido incluido en la página 14

Transducer Installation Overview Transducer Installation Overview The transducer can be installed on the transom of the boat, inside the hull, or onto a trolling motor, depending on your transducer type. The type of transducer you have will also determine how the cable will be routed. Go to the section that describes your transducer, and follow the steps to position and mount the transducer on your boat. NOTE: Due to the wide variety of hulls, only general instructions are presented in this inst

Resumen del contenido incluido en la página 15

Transom Transducer Installation Transom Transducer Installation Locating the Transducer Mounting Position Turbulence: You must first determine the best location on the transom to install the transducer. It is very important to locate the transducer in an area that is relatively free of turbulent water. Consider the following to find the best location with the least amount of turbulence: • As the boat moves through the water, Areas of Possible Turbulence turbulence is generated by the weight of t

Resumen del contenido incluido en la página 16

Transom Transducer Installation • If the transom is behind the propeller(s), it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered, such as an Inside the Hull Transducer. • If you plan to trailer your boat, do not mount the transducer too close to trailer bunks or rollers to avoid moving or damaging the transducer during loading and unloading of the boat. • If high speed operation is critical, you may want to consid

Resumen del contenido incluido en la página 17

Level Transom Transducer Installation Preparing the Mounting Location After determining the mounting location for the Positioning the Mounting Bracket transducer, follow the steps below to position and Level mount the transducer bracket. 1. Make sure that the boat is level on the trailer, both from port to starboard and from bow to stern, by placing your level on the deck of the boat, first in one direction, then in the other. 2. Hold the mounting bracket against the transom Figure 13 of the boa

Resumen del contenido incluido en la página 18

Transom Transducer Installation 4. Make sure that the drill bit is perpendicular to the actual surface of the transom, NOT parallel to the ground, before you drill. Using a 5/32” bit, drill the two holes only to a depth of approximately 1”. NOTE: On fiberglass hulls, it is best to use progressively larger drill bits to reduce the chance of chipping or flaking the outer coating. Assembling the Transducer and Initial Mounting In this procedure, you will assemble the transducer using the hardware p

Resumen del contenido incluido en la página 19

Transom Transducer Installation 2. Place the two ratchets, one on either side of the transducer knuckle, so that the beads on each ratchet line up with the desired position number on the knuckle (Figure 18a). If you are setting the ratchets at position 1, the beads on each ratchet will line up with the rib on the transducer knuckle to form one continuous line on the assembly (Figure 18b). NOTE: The ratchets are keyed; make sure that the square teeth on each ratchet face the square teeth on the t

Resumen del contenido incluido en la página 20

Transom Transducer Installation 3. Put the pivot bolt through the assembly to Inserting the Pivot Bolt hold it in position and loosely install the nut, but do NOT tighten the nut at this time (Figure 19). 4. Align the mounting bracket transducer assembly with the drilled holes in the transom. With a 5/16" socket driver, mount the assembly to the transom using the two Figure 19 #10 - 1" long screws provided (Figure 20). Hand tighten only! Mounting the Assembly to the Transom NOTE: Make sure that


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Humminbird 110 Manual de instrucciones Detector de peces 734
2 Humminbird 161 Manual de instrucciones Detector de peces 94
3 Humminbird 130 Manual de instrucciones Detector de peces 124
4 Humminbird 1197C SI Manual de instrucciones Detector de peces 211
5 Humminbird 140C Manual de instrucciones Detector de peces 315
6 Humminbird 141c Manual de instrucciones Detector de peces 159
7 Humminbird 190C PT Manual de instrucciones Detector de peces 74
8 Humminbird 200DX Manual de instrucciones Detector de peces 402
9 Humminbird 1157C Manual de instrucciones Detector de peces 25
10 Humminbird 300 SERIES 345c Manual de instrucciones Detector de peces 79
11 Humminbird 300 series Manual de instrucciones Detector de peces 104
12 Humminbird 140 Manual de instrucciones Detector de peces 46
13 Humminbird 300 SERIES 365i Manual de instrucciones Detector de peces 72
14 Humminbird 300 SERIES 345C DI Manual de instrucciones Detector de peces 45
15 Humminbird 323 Manual de instrucciones Detector de peces 135
16 Samsung HP-P5091 Manual de instrucciones Detector de peces 6
17 Samsung VP-D451 Manual de instrucciones Detector de peces 33
18 Samsung SP-R4232 Manual de instrucciones Detector de peces 4
19 Alpine Type-R SWR-M100 Manual de instrucciones Detector de peces 3
20 Audiovox Aca200w Manual de instrucciones Detector de peces 1