Resumen del contenido incluido en la página 1
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
26” Digital / Analog
LCD TV
Owner’s Manual
V07LCD26
HIGH-DEFINITION TELEVISION
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
A A71A2UH__EN.indd 1 71A2UH__EN.indd 1 2 2007/05/30 19:14:37 007/05/30 19:14:37
Resumen del contenido incluido en la página 2
NTRODUCTION I WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC RISK OF ELECTRIC SHOCK SHOCK IS PRESENT WITHIN THIS UNIT. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER IMPORTANT OPERATING AND MAINTENANCE SERVICEABLE PARTS INSIDE. REFER SERVICING TO INSTRUCTIONS
Resumen del contenido incluido en la página 3
CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into e. If the TV has been dropped or damaged in any way. this TV through openings as they may touch dangerous voltage f. When the TV exhibits a distinct change in performance, this points or short out parts that could result in a fire or electric shock. indicates a need for service. Never spill liquid of any kind on the TV. 20. REPLACEME
Resumen del contenido incluido en la página 4
NTRODUCTION I LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. • Insta
Resumen del contenido incluido en la página 5
CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION Features Contents • DTV/TV/CATV INTRODUCTION - You can use your remote control to select Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 channels which are broadcast in digital format and Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 conventional analog fo
Resumen del contenido incluido en la página 6
NTRODUCTION I Remote Control Function 1. POWER button (p12) 11. SLEEP button (p20) Press to turn the unit on and off. Press to activate the sleep timer. 2. Number buttons (p15) 12. AUDIO button (p17) Digital Mode (DTV) • Press to select channels. – button Press to select the audio language. Analog Mode (TV) • Press to shift the minor channel Press to select the audio mode. from the major channel. 13. STILL button (p16) 3. SETUP button (p13) Press to pause screen image. Press to display the ma
Resumen del contenido incluido en la página 7
CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION Control Panel 1. POWER button (p12) side of this unit Press to turn the unit on and off. 2. INPUT SELECT button (p16) POWER • Press to access connected an external device like a 1 DVD player or VCR. INPUT SELECT 2 • Press to decide the command of setting when the menu is displayed. CHANNEL 3 K L 3. CHANNEL / buttons (p15) Press to select channels or move up/down through the VOLUME 4 main menu it
Resumen del contenido incluido en la página 8
ONNECTION C Cables not included. Must be purchased separately. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sur e your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.) VHF / UHF rear o
Resumen del contenido incluido en la página 9
INTRODUCTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION CONNECTION Cables not included. Must be purchased separately. External Device Connection [HDMI Connection] HDMI (High Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to TV is of the highest possible resolution. rear of this unit e.g.) To HDMI - IN jack HDMI cable HDMI OUT DVD player with
Resumen del contenido incluido en la página 10
ONNECTION C Cables not included. Must be purchased separately. [Component Video Cable Connection] Component video connection offers better picture quality for video devices connected to the unit. Use a component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s COMPONENT 1 video input jack, connect RCA audio cables to the audio L/R jacks of COMPONENT 1. If you connect to the unit’s COMPONENT 2 video input jack, co
Resumen del contenido incluido en la página 11
INTRODUCTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION CONNECTION Cables not included. Must be purchased separately. [Video Connection] Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s VIDEO 1 video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 1. If you connect to the unit’s VIDEO 2 video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 2. When the audi
Resumen del contenido incluido en la página 12
NITIAL SETTING I These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Note: Initial Setup • If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer. selecting a language for your on-screen menu and auto channel scan, • If you press [POWER] or [SETUP] during auto channel which automatically scans and memorizes viewable channels. scan, this setting
Resumen del contenido incluido en la página 13
INTRODUCTION CONNECTION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INITIAL SETTING Main Menu Auto Channel Scan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the press [SETUP]. For more details, see the reference page for each item. unit to a different area after the initial setting, or if you restore the DTV The main menu consists of the function setting items below. channel you delete
Resumen del contenido incluido en la página 14
NITIAL SETTING I Language Selection Note: • If you connect the cable system directly, contact the CATV You can choose English, Spanish, or French as your on-screen language. installer. • If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. • Channel settings will be saved even if the power fails. Press [SETUP] to display the main menu. 1 • If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use [Cursor K / L]
Resumen del contenido incluido en la página 15
INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION WATCHING TV ATCHING TV W Channel Selection Volume Adjustment K Select channels by pressing [CH / L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use [CH K/ L] or Use [VOL. X/ Y] to adjust the audio volume. [the Number buttons]. • To select the non-memorized channel
Resumen del contenido incluido en la página 16
ATCHING TV W Still Mode Switching Each Mode You can freeze the image shown on the TV screen. You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. Press [STILL] to pause the image shown on the screen. Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes. Still TV/DTV channel Video1 • The sound output will not be paused. or • If no signal is detected or protected signal is
Resumen del contenido incluido en la página 17
INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION WATCHING TV Switching Audio Mode This section describes how to switch the audio language. TV DTV Press [AUDIO] to display the currently selected Press [AUDIO] to display the currently selected 1 1 audio mode. While receiving an MTS broadcast, language and the number of available languages. press repeatedly to cycle through the available audio 6-1 channel. English 1/3 6 SAP / STEREO Press [AUDIO] repea
Resumen del contenido incluido en la página 18
ATCHING TV W Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press [INFO]. selected program. 6 SAP / STEREO 480i 480i SD SD 4:3 4:3 T
Resumen del contenido incluido en la página 19
INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION WATCHING TV TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. Press [SCREEN MODE ] repeatedly to switch the TV For 16:9 video signal aspect ratio. Full Zoom (normal) For 4:3 video signal Sidebar Full (normal) Expand Cinema [Full] Display a 16:9 picture at its original size. [Zoom] Display a 16:9 picture at its maximum size wit
Resumen del contenido incluido en la página 20
ATCHING TV W Sleep Timer The sleep timer can be set to automatically turn off the unit after an incremental period of time. Press [SLEEP] to set the sleep timer. 1 Sleep Off • Sleep timer display appears on the TV screen. Press [SLEEP] repeatedly to change the amount of time 2 until shut off. Sleep 120min. • You can set your unit to turn off after a set period of time (from 30 to 120 minutes). • Each press of [SLEEP] will increase the time by 30 minutes. • After set up, the sleep time
