Manual de instrucciones de Harbor Freight Tools Gordon Emergency Crank Radio/Flashlight 98319

Resumen del contenido incluido en la página 1

EMERGENCY
CRANK RADIO/FLASHLIGHT
98319
SET up AND OpERATING INSTRuCTIONS
®
Distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAL.
© ®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form

Resumen del contenido incluido en la página 2

NOTICE is used to SAVE THIS MANuAL address practices Keep this manual for the safety warn- not related to personal injury. ings and precautions, assembly, operating, CAuTION, without inspection, maintenance and cleaning pro- the safety alert cedures. Write the product’s serial number symbol, is used to address in the back of the manual (or month and practices not related to year of purchase if product has no num- personal injury. ber). Keep this manual and the receipt in a safe and

Resumen del contenido incluido en la página 3

3. personal safety 5. Battery tool use and care a. Stay alert, watch what you are do- a. Recharge only with the Crank ing and use common sense when Handle (3). operating this product. Do not use b. under abusive conditions, liquid this product while you are tired or may be ejected from the battery; under the influence of drugs, alco- avoid contact. If contact acciden- hol or medication. tally occurs, flush with water. If liquid contacts eyes, additionally 4. product use and care seek me

Resumen del contenido incluido en la página 4

• Avoid operating alone. OpERATING INSTRuCTIONS • Properly maintain and inspect to Read the ENTIRE IMpORTANT avoid electrical shock. SAFETY INFORMATION 6. The warnings, precautions, and in- section at the beginning of this structions discussed in this instruction manual including all text under manual cannot cover all possible con- subheadings therein before set ditions and situations that may occur. up or use of this product. It must be understood by the operator that common sense a

Resumen del contenido incluido en la página 5

1. Check to make sure the Switch But- • Charge the internal Battery (27) for ton (13) is in its “OFF” position. one minute by rotating the Crank (See Figure A.) Handle (3). Then turn the Switch Button (13) to its “3 LED” position. 2. To charge the internal Battery (27), All three LED Lights on the unit pull out the Crank Handle (3) and ro- will illuminate for approximately 30 tate the Handle clockwise at a steady minutes before recharging is neces- rate for approximately one minute.

Resumen del contenido incluido en la página 6

detergent. Do not use solvents. Do MAINTENANCE AND not immerse the unit in liquid. SERVICING Procedures not specifically explained in this manual pLEASE READ THE must be performed only by a FOLLOWING CAREFuLLY qualified technician. THE MANUFACTURER AND/OR DISTRIBUTOR TO pREVENT HAS PROVIDED THE PARTS LIST AND pOSSIBLE INJuRY ASSEMBLy DIAgRAM IN THIS MANUAL AS FROM ACCIDENTAL A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES OpERATION: ANy REPRESENTATION OR

Resumen del contenido incluido en la página 7

pARTS LIST & ASSEMBLY DIAGRAM part # Description Qty. part # Description Qty. 1 Lower Housing 1 15 Frequency Switch 1 2 Upper Housing 1 16 Motor Assembly 1 3 Crank Handle 1 17 DC Cover 1 4 Handle Sleeve 1 18 Radio Board 1 5 Handle 1 19 Speaker Cover 1 6 Pin 1 20 Speaker 1 7 Rotary Wheel 1 21 Tap Screw (ST2x10) 4 8 Lens 1 22 Tap Screw (PW-ST2x8) 1 9 Reflector 1 23 Tap Screw (ST2x5) 3 10 Head Cover 1 24 Tap Screw (ST2 x8) 4 11 LED Board 1 25 Tap Screw (ST3x8) 1 12 Charging Socket Board 1 26 Tap S

Resumen del contenido incluido en la página 8

LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installat