Manual de instrucciones de Harbor Freight Tools 92353

Resumen del contenido incluido en la página 1

3
/ ” EARTHQUAKE
4
IMPACT WRENCH
Model 92353
ASSEMBLY AND OPERATING
INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
© ®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools.
For t

Resumen del contenido incluido en la página 2

Specifications Maximum Torque 1,100 Ft. Lbs. 3 Drive Size / ” 4 3 Air Inlet / ” - 18 NPT 8 Recommended Air Pressure 90 PSI RPM 4,800 Air Consumption 4.25 SCFM Save This Manual You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Resumen del contenido incluido en la página 3

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect air supply. Disconnect a

Resumen del contenido incluido en la página 4

Note: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance. Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacki

Resumen del contenido incluido en la página 5

Operation (continued) Warning!! This Impact Wrench supplies powerful torque and is designed to be operated with two hands. Failure to operate the Impact Wrench with two hands may result in serious injury. Refer to FIGURES 1 through 3 on page 6, and the Assembly Drawing on page 8. Note: Turn off your air compressor and disconnect the air hose when you are changing sock- ets. After you attach the socket, attach the air hose and turn the air compressor on. 4. Select the appropriate size 3/4” dri

Resumen del contenido incluido en la página 6

Maintenance 1. Make sure your Impact Wrench is disconnected from the air hose before attempting any maintenance. 2. Wipe the Impact Wrench down with a lint free cloth after each use. 3. Make sure the Anvil (39) is clear of dirt or debris. If possible, spray it with compressed air before each use. 4. Annually, or more often if used on a daily basis, use a grease gun (not included), to inject grease into the Grease Fitting (12). See FIGURE 3. 5. If you do not use an inline oiler/filter system, l

Resumen del contenido incluido en la página 7

Parts List Pn artDy escriptio Qt 'tPn arDy escriptio Q't 1gH1 ousin 2e5F1 ront End Plat 2rT1 rigge 2n6P1 i 3yT1 hrottle Valve Ass' 2g7F1 ront Rotor Bearin 5tT1 hrottle Valve Sea 2r8M1 otor Retainer Washe 6gT1 hrottle Valve Sprin 2r9M1 otor Retaine 7rE1 xhaust Deflecto 3t0H1 ammer Housing Gaske 8tI1 nle 3g1H1 ammer Housin 9eH1 ousing Plat 3g2H1 ammer Bushin 1t 0H1 ousing Plate Gaske 3w3H4 ammer Housing Cap Scre 1w 1H2 ousing Plate Scre 3r4L4 ock Washe 1g 2G1 rease Fittin 3r5R1 ear Hammer Frame Wa

Resumen del contenido incluido en la página 8

Assembly Drawing SKU 92353 For technical questions, please call 1-800-444-3353 Page 8