Resumen del contenido incluido en la página 1
IP Indoor High Speed Dome
CAM-6500 series
Ver. 061030
Hardware User’s Manual
Resumen del contenido incluido en la página 2
0 PRECAUTIONS 0 1. Read these instructions All the safety and operating instructions should be read before the product is operated. 2. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following items, please carefully read the description next to each symbol. a. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment. b. The requi
Resumen del contenido incluido en la página 3
typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice. FCC/CE Regulation NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
Resumen del contenido incluido en la página 4
Table of Contents 0 PRECAUTIONS________________________________________________0-1 Copyright __________________________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ___________________________________________________________________ 0-1 FCC/CE Regulation __________________________________________________________ 0-2 1 INTRODUCTION ________________________________________________1 1.1 Package Contents
Resumen del contenido incluido en la página 5
B-3: Configuration Menu_______________________________________________________42 B-3-1 DEFAULT CAMERA__________________________________________________43 B-3-2 BACKLIGHT ________________________________________________________43 B-3-3 FOCUS _____________________________________________________________44 B-3-4 APERTURE _________________________________________________________45 B-3-5 AE MODE___________________________________________________________45 B-3-6 WBC MODE ________________________
Resumen del contenido incluido en la página 6
1 INTRODUCTION 1 1.1 Package Contents CAM-6500 series Warranty Card Product CD Power & A/V Cable LAN/WAN Cable Power Adaptor (Option) 5.4” Transparent Cover Decoration Ring / Fixing Plate 1
Resumen del contenido incluido en la página 7
1.2 Features and Benefits The IP High Speed Dome is designed to deliver superb performance and durability with an intelligent and stylish housing. It also provides a realiable real time images with outstanding image quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. That’s because it is Ethernet (LAN and WAN) ready and has a powerful ARM9 SoC and the MPEG-4 compression ASIC inside. In addition, with these powerful hardware platform, excellent SDK support and
Resumen del contenido incluido en la página 8
MODEL) Low-Light Application Digital Slow Shutter and Electronic Shutter functions are provided for clear and high quality image. The minimum illumination is 0.01 Lux. Perfect Contrast Solution for High Image Quality Wide Dynamic Range function is a salient features incorporated to fit your needs (23x MODEL) Privacy Mask for Privacy Protection There is up to 24 privacy zones of camera view programmable. This is specially designed to avoid any intrusive monitoring at specific region.
Resumen del contenido incluido en la página 9
The IP high speed dome provides two RJ-45 connectors. One is WAN and the other is LAN. The WAN port connects to the internet and LAN port connects to the local network. Since the internet’s bandwidth is very critical, the WAN port is equipped with a low latency PPPoE (Point-to-Point over Ethernet) which has excellent transmission speed and enables the IP high speed dome to connect to an ADSL or a cable modem. DDNS Supported The IP high speed dome supports DDNS (Dynamic Domain Name Serv
Resumen del contenido incluido en la página 10
1.3 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above. Don’t open the housing of the product Cleaning Disconnect this video product from the power supply before cleaning. Attachments Do not use attachments not recommended by
Resumen del contenido incluido en la página 11
1. When the power-supply cord or plug is damaged. 2. If liquid has been spilled, or objects have fallen into the video product. 3. If the video product has been exposed to rain or water directly. 4. If the video product does not operate normally by following the operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment . Other controls may result in damage and will often require extensive work by a qualified tec
Resumen del contenido incluido en la página 12
1.4 Physical Description Indoor High Speed Dome Bottom 1. Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continuing to hold the reset button. Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings. 2. Communication Switch Setting The table below shows the function of e
Resumen del contenido incluido en la página 13
Pin 4 Line Lock Pin 5 System Initialization (for upgrade) Pin 6 Reserved RS-232 is reserved for internal use only; The Pin 3 and Pin 4, they are used for termination and Link Lock adjustment respectively. The Pin 5 is mainly used for return to factory default of camera setting. 3. Dome ID Setting Use the switch to change your speed dome ID by turning the arrow to the desired number respectively. For instance, if the speed dome ID is 123, the ID switch should be set as below: ce
Resumen del contenido incluido en la página 14
14 Pelco P 9600 Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance, the ID switch should be set as below: decimal single digit 5. 16 Pin Connector for LAN/WAN The LAN/WAN cable (shown as the figure below) is shipped with IP high speed dome. Please find it in the accessory bag. 6. 22 Pin Connector A 50cm data cable (shown as the figure below) is shipped with IP high speed dome. Please find it in the accessory bag. Power Input PIN NAME DESCRIPT
Resumen del contenido incluido en la página 15
1.5 Mounting the IP High Speed Dome Generally, there are three kinds of ceiling mounting methods: surface mount, in-ceiling mount, and mounting with straight tube. The surface mounting kit is shipped with IP high speed dome. For more detailed information, please refer to Appendix A. Surface ceiling mount (cables exposed) 10
Resumen del contenido incluido en la página 16
1.6 Basic Connections Follow the procedures below to connect the IP high speed dome to the respective apparatuses. 11
Resumen del contenido incluido en la página 17
Appendix A: Speed Dome Installation Basing on user’s installation environments, the dome can be installed on ceiling, on wall or on pole. In the following section, various indoor speed dome installation accessories, installation methods and installation procedures will be described in detail. A-1: Optional Accessories Surface Ceiling Mount For Surface Ceiling use. Height: 21.4mm ; Diameter of the three holes: 4.5mm ; Diameter of the bracket: 158mm In-Ceiling Mount For in-ceiling In
Resumen del contenido incluido en la página 18
Ceiling Panel For ceiling mounting. Zn platted; 610×305 mm (24×12 inches); Diameter: 155 mm (6.1 inches) Transparent Cover/Smoke Cover Diameter: 137 mm (5.4 inches); 127 mm (5.0 inches) 5’’ Transparent Cover 5.4’’ Transparent Cover 5’’ Smoke Cover 5.4’’ Smoke Cover Indoor Mount Kit White; Diameter: 140 mm (5.5 inches); Height: 74 mm (2.9 inches) For mounting indoor dome camera onto a gooseneck/straight tube. 13
Resumen del contenido incluido en la página 19
Mounting Accessories Gooseneck Tube White/Iron; 298×385 mm (11.73×15.56 inches) ; 2.1 kg (4.6 lbs) Supplied with rubber washer-8×1, pendant tube washer×1, spring washer-8×1 and waterproof rubber×1, M8*12 screw×1. Straight Tube White/Iron; Height: 250/500 mm (9.8/19.7 inches); Diameter: 50 mm (2 inches) 1 kg (2.2 lbs) / 1.8 kg (4 lbs). Supplied with rubber washer-8×1, pendant tube washer×1, spring washer-8×1 and waterproof rubber×1, M8*12 screw×1. Corner Standard Mounting Pla
Resumen del contenido incluido en la página 20
washer-8×4, spring washer×4, M8*20 screw×4, M8 nut×4. Pole Thin Direct Mounting White/Ivory; 232(L)×136(W)×60(D) mm (9.1×5.4×2.4 inches); Diameter: 112~140 mm (4.4~5.5 inches); 0.7 kg (1.6 lbs). Supplied with stainless steel straps×4, M8*16 screw×4, washer×4. Pole Wide Direct Mounting White/Ivory; 270(L)×170(W)×60(D) mm (10.6×6.7×2.4 inches); Diameter: 112~130 mm (4.4~5 inches); 1 kg (2.2 lbs). Supplied with stainless steel straps×4, M8*16 screw×4, washer×4, spring washer×4 15
