Manual de instrucciones de Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9

Manual de instrucciones del aparato Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9

Aparato: Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9
Categoría: Centro de ocio de cocina
Fabricante: Bakers Pride Oven
Tamaño: 1.74 MB
Fecha de añadido: 9/19/2013
Número de páginas: 32
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9.

Para tu comodidad

Si ver los manuales de instrucción de Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Bakers Pride Oven Convection Heated Holding Cabinet CA34-CV9. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

Innovative Foodservice Equipment Custom
Designed for Performance, Service and Value.
Convection Heated Holding Cabinets
OPERATION & MAINTENANCE MANUAL
MODELS:
CA34-CV9
CA43-CV7 or CV13
CA70-CV16 or CV32
CA34-CVMP4
CA43-CVMP6
CA70-CVMP12
CS34-CH9
CS43-CH7 or CH13
CS72-CH16 or CH32
CS34-CHUS4
CS43-CHUS6
CS70-CHUS15
CS43-CVMP6-SB
CS61-CVMP12-SB
CS71-CVMP15-SB
P/N 780085 1/06
Phone: +1 (214) 421-7366
Fax: +1 (214) 565-0976
BevLes
Toll Free: +1 (800) 441-1601
Website: www.BevLes.com
729 Third Avenue

Resumen del contenido incluido en la página 2

TABLE OF CONTENTS 1 WARRANTY 3 2 GETTING STARTED 4 2-1 INTRODUCTION 4 2-2 MODELS 4 2-3 UNPACKING 4 2-4 SETTING-UP 5 2-5 CLEANING. 5 3 OPERATION 6 3-1 OPERATING CONTROLS AND COMPONENTS 6 3-2 OPERATIONAL PROCEDURES 6 4 CARE OF YOUR UNIT 7 4-1 ASSISTANCE 7 4-2 SAFETY AND HEALTH 7 4-3 CLEANING 7 4-4 MODEL SPECIFICATIONS 7 5 TROUBLESHOOTING 7 5-1 TROUBLESHOOTING 7 5-2 TROUBLESHOOTING TABLE 8 6 MAINTENANCE 9 6-1 REPLACING PARTS 9 6-1a REMOVING THE TOP MOUNTED HEATING MODULE 9 6-1b REMOVING THE FRONT P

Resumen del contenido incluido en la página 3

1. WARRANTY BEVLES COMPANY LIMITED WARRANTY 729 Third Avenue * Dallas, TX 75226 Phone: +1 (214) 421-7366 Fax: +1 (214) 565-0976 1. Bevles warrants to the original purchaser that on the date the equipment is shipped (sold), it will be s the warranty period printed , below any part that has a defect in material or workmanship that was present when the product shipped from Bevles, and which manifests itself during the warranty period under normal use and service. ! Parts: wo* T years from date of o

Resumen del contenido incluido en la página 4

2. GETTING STARTED 2-1 INTRODUCTION BEVLES Heated Holding Cabinets are quality built equipment designed to hold prepared foods at a safe temperature (no less than 140°), with or without humidity. These cabinets have a wide range of applications for both institutional and commercial foodservice operations This manual has been prepared so that all personnel responsible for the operation and maintenance of this equipment will have a thorough understanding of its operation and use. We recommend that

Resumen del contenido incluido en la página 5

2-4 SETTING-UP Locate your holding cabinet in an area where the doors can be opened without impeding your operation and where loading and unloading product will be easy. **WARNING: A clearance of at least four (4) inches is required between the top of full size units (models beginning with CA70) and any other equipment or surfaces to allow air to circulate to the motor air vents. Do not set anything on top of these units. Proper operation of the unit requires that it be level and that it be plug

Resumen del contenido incluido en la página 6

10. Clean all pieces thoroughly and carefully with soapy water and soft cloths. **NOTE: Neverusesteelwoolorcausticcleaningcompounds. **CAUTION: Avoid splashing water or any other liquid into the heating module to prevent possible damage to electrical components. Reassembly Steps: 1. Replace door latches (Fig.5): 1a. Wrap the flat metal latch spring lip around the front edge of the door between the two latch butts. 1b. Place the latch plate with the flat side out over the flat metal latch spring

Resumen del contenido incluido en la página 7

4. CARE OF YOUR UNIT As with any piece of quality equipment, your BEVLES Heated Holding Cabinet requires regular care and maintenance. The most vital procedure is the regular and thorough cleaning of the entire unit. For your assistance, we have included the following sections in this manual: 2-4 Setting Up 5 Troubleshooting 7-6 Parts List 2-5 Cleaning 6-1 Replacing Parts 8-1 Wiring Diagrams 4-1ASSISTANCE BEVLES is proud of each quality-built cabinet. Should you ever need assistance, parts or ad

Resumen del contenido incluido en la página 8

4. If you are unable to locate the problem in the table or if the solutions listed don't work, please call the BEVLES manufacturing facilities for assistance at (800) 441-1601. You will need to provide the factory personnel with the following information: 1. The product model and serial numbers. 2. The specific nature of the problem. In some cases it will be beneficial to also have the actual operator of the equipment available to answer questions. 5-2 TROUBLESHOOTING TABLE Problem Possible Caus

Resumen del contenido incluido en la página 9

6. MAINTENANCE **CAUTION: All maintenance on BEVLES Heating Holding Cabinets should be performed by trained personnel using only quality BEVLES parts. 6-1 REPLACING ARTS P ter Af using the roubleshooting T able t (section 5-2) to determine the solution, refer to the appropriate section . below The tools and equipment needed for each repIacement procedure are listed at the beginning of that procedure. 6-1a. Removing the top mounted heating module. Required: No tools required 1. Unplug unit from p

Resumen del contenido incluido en la página 10

5. Feed the wires of the replacement indicator lamp module through the opening and snap the new indicator lamp module into place. 6. Reconnect wiring with each of the two new wires going to a different wire nut (it doesn't matter how you match the new module wires). Re-tape over wire nuts and wires. WARNING: ** Be sure to correctly match the other wires that were connected at the two wire nuts. 7. Replace the front panel (section 6-1b). 6-1d. Replacing the thermostat indicator lamp module. Requi

Resumen del contenido incluido en la página 11

6.1f. Replacing the thermometer. Required: Crescent or standard 3/4" wrench 1. Remove front panel as found in section 6-1b. 2. Use a crescent or standard 3/4" wrench to loosen the thermometer mounting nut that holds the thermometer in place on the back of the front panel. (Fig. 16) 3. Remove the nut, washer and retaining bracket and pull thermometer out the front of the panel. 4. Replace retaining bracket and insert new thermometer into opening. **NOTE: Align thermometer so that the 150° reading

Resumen del contenido incluido en la página 12

6-1h. Replacing the power cord for a CA43. Required: Medium (6”) phillips screwdriver, Medium (6") flathead screwdriver, Wiring markers (color or number codes), Electrical tape , Wiring diagram for CA43(see step 10) 1. Remove the back panel of the module by removing the five phillips head screws and gently lifting out the back panel. Lay the panel on a clean work surface. (Fig. 22) (0) (4) (5) (1) Cooling Klixon Fan Figure 20 (Grd) Thermostat (2) (3) Power Cord (0) (5) (0) Heating (1) (4) (1) Fa

Resumen del contenido incluido en la página 13

Figure 24 Figure 25 Figure 26 (0) (1) (0) (0) (5) (1) Cooling (0) (1) (5) Power (1) (0) Fan (Grd) Indicator Lamp (4) (5) (1) Thermostat (2) (3) Fan (2) Thermostat Blower (3) Power Switch Heating Klixon Indicator Lamp Power Cord (4) Element (1) Thermostat Diagram 3 Figure 27 Figure 28 Figure 29 6-1i. Replacing the thermostat for a CA70. Required: Small flathead screwdriver, Medium (6") flathead screwdriver, Medium (6") phillips screwdriver, Wiring markers (color or number codes), Electrical tape,

Resumen del contenido incluido en la página 14

7. Pull the copper thermostat probe and tubing from the fan blower motor assembly area through the opening to the front cover (it may be necessary to feed the probe, into the bottom of the assembly area under the fan blower to achieve the correct angle). (Fig. 31) **NOTE: DO NOT bend or kink the copper tubing when replacing the thermostat probe. 8. Disconnect wires from rear of thermostat by reversing screw terminals with a flathead screwdriver. 9. Connect wires to the rear of a new thermostat u

Resumen del contenido incluido en la página 15

8. Remove the two screws and nuts securing the clips that attach the copper thermostat probe to the motor bracket. Use a medium flathead screwdriver. (Fig. 38) 9. Pull copper probe and tubing from fan blower motor area through the opening to the front panel. **NOTE: DO NOT bend or kink the copper tubing when replacing the thermostat probe. 10. Disconnect wires from rear of thermostat by reversing screw terminals with a flathead screwdriver. 11. Connect wires to the rear of a new thermostat unit

Resumen del contenido incluido en la página 16

6-1k. Replacing the fan blower motor assembly. Required: Medium (6") flathead screwdriver, Medium (6”) phillips screwdriver, Crescent or standard wrench, Wiring markers (color or number codes), Electrical tape 1. Remove top mounted heating module as found in section 6-1a. 2. Remove the fan blower motor assembly cover (on the left side of module as you are facing the front panel) by removing the two front and two rear screws with a medium (6”) flathead screwdriver. (Fig. 40) 3. Pry off fan blower

Resumen del contenido incluido en la página 17

12. For CA70 units, secure fan blower motor bracket with the four phillips screws. Reattach thermostat probe clips with two flathead screws. **NOTE: DO NOT kink or bend the copper probe or tubing. 13. For CA43 units, reattach thermostat probe clips with two flathead screws. **NOTE: DO NOT kink or bend the copper probe or tubing. Secure fan blower motor bracket with the four flathead screws. 14. Reconnect existing wires to new motor wires. It is not important which new wire is matched with which

Resumen del contenido incluido en la página 18

6-1m. Replacing the High-temperature safety thermostat. Required: Medium (6”) flathead screwdriver, Medium (6") phillips screwdriver, Crescent wrench 1. Remove top mounted heating module as found in section 6-1a. 2. Remove four screws that secure the air deflector housing (on your right as you are facing the front of heating module) to the module with a medium (6”) flathead screwdriver. 3. Gently lift the air deflector housing to access the nuts and connecting wires to the high temperature safet

Resumen del contenido incluido en la página 19

7. REPLACEMENT PARTS Use only BEVLES replacement parts in repairing your unit. This assures you of continued high quality performance. 7-1 HOW TO ORDER To determine the parts you need: 1. Use the drawings found in section 7-5 and refer to the parts list in section 7-6 to determine the BEVLES part numbers you need. 2. Note the model number, serial number and the date of manufacture of your unit from the serial number label (located in the top right front comer of the right side of the unit). 3. C

Resumen del contenido incluido en la página 20

CA70 MODELS 7-5a. Heating Module for CA70 Models 7-5b. Cabinet Assembly for CA70 Models Drawing Drawing Description Description Reference Reference Number Number 1 Heating Module 1 Heating Module 1A Heating Module, MP 1A Heating Module, MP 1B Heating Module, HW 1B Heating Module, HW 2 Front Control Panel 2 Cabinet Assembly 2A Front Control Panel, MP 2A Cabinet Assembly, MP 3 Sheet Metal Screw, #10 x ½ s/s phillips 3 Dutch Door, Upper 4 Flat Washer, AN960-ClOL sls 3A Dutch Door, Upper for MP 5 Th


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Bakers Pride Oven Convection Heated Holding Cabinet CA70-CVMP12 Manual de instrucciones Centro de ocio de cocina 0
2 Bakers Pride Oven Convection Heated Holding Cabinet CS43-CHUS6 Manual de instrucciones Centro de ocio de cocina 0
3 Bakers Pride Oven Convection Heated Holding Cabinet CS70-CHUS15 Manual de instrucciones Centro de ocio de cocina 0
4 Bakers Pride Oven CA70-CV16 or CV32 Manual de instrucciones Centro de ocio de cocina 0
5 Bakers Pride Oven Convection Heated Holding Cabinet CS34-CHUS4 Manual de instrucciones Centro de ocio de cocina 0
6 Bakers Pride Oven Convection Heated Holding Cabinet CA43-CVMP6 Manual de instrucciones Centro de ocio de cocina 0
7 Bakers Pride Oven Convection Heated Holding Cabinet CS61-CVMP12-SB Manual de instrucciones Centro de ocio de cocina 1
8 Bakers Pride Oven CS34-CH7 or CH13 Manual de instrucciones Centro de ocio de cocina 1
9 Bakers Pride Oven CS72-CH16 or CH32 Manual de instrucciones Centro de ocio de cocina 0
10 Bakers Pride Oven Proofer/Hot Cabinet PHC70-MPINS Manual de instrucciones Centro de ocio de cocina 0
11 Bakers Pride Oven Wall Mount/Under Counter Proofer/Holding Cabinet PHC23-AR10 Manual de instrucciones Centro de ocio de cocina 1
12 Bakers Pride Oven Wall Mount/Under Counter Proofer/Holding Cabinet PHC23-AR12 Manual de instrucciones Centro de ocio de cocina 0
13 Bakers Pride Oven CA43-CV9 Manual de instrucciones Centro de ocio de cocina 0
14 Bakers Pride Oven CA43-CV7 or CV13 Manual de instrucciones Centro de ocio de cocina 0
15 Bakers Pride Oven Convection Heated Holding Cabinet CA34-CVMP4 Manual de instrucciones Centro de ocio de cocina 0
16 Sony VAIO Countertop Computer Manual de instrucciones Centro de ocio de cocina 3
17 Sony PCV-R536DS Manual de instrucciones Centro de ocio de cocina 2
18 Sony VGN-CR100 Manual de instrucciones Centro de ocio de cocina 1
19 Sony PCV-R532DS Manual de instrucciones Centro de ocio de cocina 1
20 Sony PCV-R539DS Manual de instrucciones Centro de ocio de cocina 3