Resumen del contenido incluido en la página 1
Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs
Marketing Name / Model
[List multiple models if applicable.]
HP 431 Notebook PC
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste
Resumen del contenido incluido en la página 2
Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Automatic crossing screw driver Philip #1 Description #2 Description #3 Des
Resumen del contenido incluido en la página 3
Tabulator:Wings Yi WorkInstructs Document No.: Disassembly WI Step : 1 Name : Get Battery Date : 20111 13 Step: Battery Switch 1. Push the Battery switch and take off the battery.(Fig.1) 2. Loosen eight screws on Battery house and take off Memory Fig.1 Door.(Fig.2) Fi
Resumen del contenido incluido en la página 4
Tabulator:Wings Yi WorkInstructs Document No.: Disassembly WI Step : 2 Name : Get HDD/Memory/ODD Date : 20111 13 ODD lock Step: 1.Lo osen four screws and pull out the WLAN cable and power cable.(Fig.1) Fig.1 2. Take off Memory WLAN HDD door andODD.(Fig.1) 3. Loosen four screws andpull out HDD cable from MB. (Fig.2)
Resumen del contenido incluido en la página 5
Tabulator:Wings Yi Work Instructs Document No.: Disassembly WI Step : 3 Name : Get KB Date : 2011 1 13 Step: 1.Lo osen four screws on HDD door.(Fig.1) 2. Loosen ten screws.(Fig.2) Fig.1 3. Take off the keyboard from top side,set atanangle of 45 degrees. (Fig.3) Fig.2 Fig.3 Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Point for attention: If finding some
Resumen del contenido incluido en la página 6
Tabulator:Wings Yi Work Instructs Document No.: Disassembly WI Step : 4 Name : Remove C cover Date : 2011 1 13 Fig.2 Step: Fig.1 1. Pull out the POWER BUTTON BOARD Cable.(Fig.1) 2. Remove the TB Cable.(Fig.2) 3. Loosen the screws and breakaway the logic upper along the arrowhead. (Fig.3) Fig.3 Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Point for att
Resumen del contenido incluido en la página 7
Tabulator:Wings Yi Work Instructs Document No.: Disassembly WI Step : 5 Name : Disassemble C cover Date : 2011 1 13 Step: 1. Pull out the TP cable. (Fig.1) 2. Loosen two screws the and take off the POWER BUTTON BOARD.(Fig.2) 3. Loosen seven screws and Fig.1 remove the TP bracket.(Fig.3) Fig.3 Fig.2 Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Point for
Resumen del contenido incluido en la página 8
Tabulator:Wings Yi WorkInstructs Document No.:Disassembly WI Step : 6 Name :Get Mother Board Date : 2011 1 13 Step: 1. Take off RTC battery.(Fig.1) 2. Pull out LVDS/FAN cable/ Speaker cable/HDD cable/USB Board cable from MB.(Fig.1) 3. Loosen the screw and remove USB Board. (Fig.2) RTC battery 4. Loosen four screws and take off Speaker. (Fig.3) Fig.1 5.Loosen the screw and Take off the MB. (Fig.1) Fig.2 Fig.
Resumen del contenido incluido en la página 9
Tabulator:Wings Yi WorkInstructs Document No.:Disassembly WI Step : 7 Name :Remove Thermal Module and CPU Date : 2011 1 13 Step: 1. Loosen six screws andremove Fig.1 the Thermal Module.(Fig.1) 2. Turn the CPU lock 90 degree and get the CPU.(Fig.2) Fig.2 Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Point for attention: If finding some defects, notice the gaffe
Resumen del contenido incluido en la página 10
Tabulator:Wings Yi WorkInstructs Document No. :Disassembly WI Step : 8 Name :Remove D cover Date : 20111 13 Step: 1. Loosen four screws and take off the panel from D cover.(Fig.1) 2. Loosen two screws and remove HDDcable.(Fig.2) Fig.1 3. Loosen two screws and take off Power cable. (Fig.3) Fig.2 Fig.3 Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Point
Resumen del contenido incluido en la página 11
Tabulator:Wings Yi Work Instructs Document No. : Disassembly WI Step : 9 Name : Get LCD panel Date : 2011 1 13 Step: 1. Uncover two horned Mylar then loosen two screws.(Fig.1) Fig.1 2. Breakaway the LCD bezel along the arrowhead.(Fig.2) 3. Loosen two screws and remove the Hinge Caps. (Fig.3) Fig.2 Fig.3 Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Poin
Resumen del contenido incluido en la página 12
Tabulator:Wings Yi Work Instructs Document No.:Disassembly WI Step : 9 Name : Get LCD panel Date : 20111 13 Step: 4. Loosen six screws .(Fig.1) 5. Turn over LCD and pull out the LVDS connecter.(Fig.2) 6. Loosen six screws and remove the Hinges. (Fig.3) Fig.1 LVDS connecter Fig.2 Fig.3 Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Point for attention: If f
Resumen del contenido incluido en la página 13
Tabulator:Wings Yi WorkInstructs Document No.:Disassembly WI Step : 10 Name :Remove camera Date : 2011 1 13 Fig.1 Step: 1. Pull out the LVDS form camera and tear up the LVDS cable along the arrowhead. (Fig.1) 2. Tear up the camera from A cover along the arrowhead.(Fig.2) Fixture list(Fixture standard) Qty Fixture list(Fixture standard) Qty Cross Head of Screws Driver 1 Point for attention: If finding some d
