Resumen del contenido incluido en la página 1
Spirit 41
CODE
616E
OWNER’S HANDBOOK
Original Version (EN)
ISSUE: 06.06.11 PART NUMBER: 111-5145 (A)
Resumen del contenido incluido en la página 2
CONTENTS Contents 2 - Grassbag 9 - Without Grass Collection 9 Introduction 3 - Heavy Growth 9 - Friction Disc 10 Specifications / Main Features 4 - Non-Grassed Areas 10 - Maintenance Schedule 11 Safety Precautions 5 - 6 - Safety Alert Symbol 5 Mower Maintenance 11 - 13 - Training 5 - Carburettor Adjustments 11 - Preparation 5 - Oil Service 11 - Safety Symbols 5 - Air Cleaner Service 11 - Operation 5 - 6 - Spark Plug Service 11 - Maintenance & Storage 6 - Keeping Engine Clean 11 - Control Symb
Resumen del contenido incluido en la página 3
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you Use of non standard parts or any arbitrary modifications carried out on this machine may gain safe and efficient service from your machine. relieve Hayter Limited of liability for any resulting damage or injury. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it Hayter mowers are robustly constructed and designed for efficient economical perfor- gives essential informa
Resumen del contenido incluido en la página 4
SPECIFICATIONS / MAIN FEATURES Code 616 Engine Briggs & Stratton Engine type Series 500 Engine / Cutterbar Speed 2850 rpm Fuel type Unleaded petrol Fuel capacity 1.5 litres Oil type SAE 30 engine oil Oil sump capacity 0.6 litres Cutting width 410mm Cutting height 13 - 65mm Overall dimensions 1050 x 472 x 1370mm Weight 30 Kg 7 1. Air Cleaner. 2. Engine Cover 3. Oil Filler Cap and Dipstick. 8 6 4. Serial No. Label. 5. Handlebar Securing Knob. 6. Engine Start Grip. 7. Engine Stop Lever. 5 9 8. Upp
Resumen del contenido incluido en la página 5
SAFETY PRECAUTIONS damaged cutterblade must be replaced immediately with a Safety Alert Symbol Preparation genuine Hayter replacement part. This safety alert symbol indicates important safety While mowing, always wear substantial footwear and messages. When you see this symbol be alert to the long trousers. Do not operate the equipment when possibility of injury. Carefully read the following and barefoot or wearing sandals. Operation inform others. Do not operate the engine in a confined spa
Resumen del contenido incluido en la página 6
SAFETY PRECAUTIONS while the engine is running. Inspect the exhaust periodically and replace if worn or Operation cont leaking. Always replace worn or faulty parts with genuine Hayter Never touch the exhaust/exhaust guard or cooling fins parts. when the engine is hot. Never store the mower with petrol in the tank within an enclosed area where fumes may reach an open flame or If the machine has to be tilted for transportation when Stop the engine and disconnect the spark plug lead: spark. c
Resumen del contenido incluido en la página 7
ASSEMBLING THE MOWER BEFORE FIRST USE Delivery Checklist Grassbag Attachment Fuel Type Remove the mower from the packaging and check that Raise the rear deflector, lower the grassbag through the Always use clean, fresh unleaded petrol. Purchase fuel the following items have been supplied correctly. If any handlebar and hook into position. Lower the deflector to in quantities that can be used within 30 days. Never mix items are missing contact, your local Hayter dealer. rest on the grassbag (Re
Resumen del contenido incluido en la página 8
OPERATING THE MOWER handlebar to start and keep the engine running. If the Emergency stop: Release the engine stop lever. Controls engine stop lever is released the engine will stop. Operate all control levers several times and ensure that If the engine fails to stop, disconnect the spark plug the cables move freely. Check that the engine stop lever To prevent damage never pull the engine start grip lead. (Refer fig.12) returns freely to its rest position when released. (Refer when the eng
Resumen del contenido incluido en la página 9
OPERATING THE MOWER Slopes Grassbag Friction Disc To prevent engine damage do not use the mower on Raise the rear deflector and lift the grassbag through the The cutterblade is driven by the engine via a friction slopes greater than 20 degrees. (Refer fig.13) handlebar and lower the rear deflector to rest against the disc to help prevent damage occurring to the engine rear of the mower. crankshaft and cutting mechanism when a hidden obstruction or overload is encountered. (Refer fig.19) He
Resumen del contenido incluido en la página 10
MAINTENANCE SCHEDULE heavy load or high ambient temperature. Maintenance Schedule To prevent accidents, stop the engine and disconnect - Service the air cleaner. the spark plug lead before attempting to carry out procedures on the mower. - Lubricate wheels, pivot points and linkages and grease the inner control cables at point of entry and exit from After the very first five hours change the engine oil. their outer casing. Follow the hourly or calendar intervals, whichever occurs - Check th
Resumen del contenido incluido en la página 11
MOWER MAINTENANCE Carburettor Adjustments Air Cleaner Service Keeping Engine Clean Should only be made by an authorised Briggs & Stratton To service the air cleaner, loosen and remove screw (1) Remove all grass and debris from the engine including dealer. Under no circumstances should the engine be and remove cover (2). (Refer fig.22) the exhaust/exhaust guard, the air ways in the top cowl adjusted to run at a speed in excess of that shown on the and the surrounding deck areas on a daily basis
Resumen del contenido incluido en la página 12
MOWER MAINTENANCE edges to avoid the risk of injury should the tool slip. A slightly worn cutterblade may be re-sharpened. Both Securing Nuts & Bolts ALWAYS use genuine Hayter replacement parts. blade edges must be sharpened equally to ensure balance. Regularly check that all securing nuts and bolts are tight. Sharpen the cutterblade every 25 mowing hours or more Replace missing or damaged items immediately. The condition of the cutterblade and its mounting frequently if conditions requir
Resumen del contenido incluido en la página 13
MOWER MAINTENANCE Slowly pull the engine start grip once to crank the engine. Storage This will distribute the oil and help prevent engine corro- To store the handlebar, unscrew the 2 small securing sion. knobs sufficiently to allow it to be pivoted forwards to rest against the mower. Take care to ensure that the con- Clean grass and debris from the engine cylinder, cylinder trol cables do not become snagged at the pivot point and head cooling fins, under top cowl, around and behind ex- dep
Resumen del contenido incluido en la página 14
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. Keep off the grass if frozen or necessary to mow the lawn twice a week. Raking before assist in drainage. Brush in peat and sharp sand. waterlogged. mowing is important this month as the combined action keeps runners of clover under control. Water
Resumen del contenido incluido en la página 15
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION 1. Engine stop lever released 1. Operate engine stop lever Discharge chute blocks 1. Grass is wet 1. Mow dry grass 2. Incorrect oil level 2. Check oil level 2. Cut height is too low 2. Increase cut height Engine will not turn 3. Obstruction under deck 3. Remove obstruction 3. Grassbag full 3. Empty grassbag over 4. Battery discharged (if fitted) 4. Charge battery 4. Airflow through the grassbag 4. Clean the grass
Resumen del contenido incluido en la página 16
WARRANTY NOTES LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty regis
Resumen del contenido incluido en la página 17
NOTES NOTES 17
Resumen del contenido incluido en la página 18
CUSTOMER INFORMATION SERVICE RECORD CODE SERIAL NO. 1st Y ear (12 months ) 1st Y ear (12 months ) Owner ’s Name : We certify t hat this service h as been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Engine Type:- Engine:- Date of Sale:- Your Local Dealer:- Note for dealer : Please retain this voucher for your records. 2nd Y ear (24 months ) 2nd Y ear (24 months ) Owner ’s Name : We certify t hat this serv
