Resumen del contenido incluido en la página 1
Visit us at: www.swisherinc.com
OWNER’S
MANUAL
MODEL NO.
WB942
THE FINISHING TOUCH
42” FINISH CUT MOWER SELF PROPELLED
WALK BEHIND
Read and follow all Safety
Rules and Instructions
Assembly
before operating this
equipment.
Operation
Service and Adjustment
Rev.04-083
Repair Parts
1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093
Made In The
PHONE (660) 747-8183 FAX (660) 747-8650
Manufacturing quality lawn care equipment since 1945
USA
ONWB942
Resumen del contenido incluido en la página 2
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1) Engine Warranty All engines utilized on our products have a separate
Resumen del contenido incluido en la página 3
SAFETY PRECAUTIONS AND DECALS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine is capable of amputating hands and feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Read the manual. Learn to operate this machin
Resumen del contenido incluido en la página 4
• Turn off the blades when not mowing. Before leaving the machine, turn off the blades and stop the engine. • Watch for traffic when operating near or crossing roadways. • Do not operate the mower if it has been dropped or damaged in any manner or if the mower vibrates excessively. Excessive vibration is an indication of damage. Repair mower as necessary. • Dress properly. Do not operate the mower when barefoot or wearing open sandals. Wear only solid shoes with good tracti
Resumen del contenido incluido en la página 5
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. OD36 – DEFLECTOR DECAL OD30 – WARNING DECAL OD55 – DANGER DECAL OD43 – FLYING DEBRIS DECAL OD29 – SPINNING BLADE DECAL
Resumen del contenido incluido en la página 6
OPERATING YOUR NEW CUTTER The operation of any cutter can produce foreign objects to be thrown into the eyes, resulting in severe eye damage. Always wear certified safety glasses or wide- vision safety goggles before starting any cutting machine and while operating such a machine. The operation of any cutter produces sound waves that are damaging to the human ear. Ear protection is recommended. CAUTION! Tragic accidents can occur if the operator is not alert to the presence of children. Chil
Resumen del contenido incluido en la página 7
SERVICE AND ADJUSTMENTS Stop engine, let all moving parts come to a complete stop. Disconnect spark plug. BLADE SPINDLE BELT TRANSMISSION BELT BLADE DRIVE BELT BELTS CONFIGURATION BLADE SPINDLE BELT REPLACEMENT REMOVAL • Stop engine, let all moving parts come to a complete stop. Disconnect spark plug. • Remove belt cover. • Remove Blade Drive Belt. (See Blade Drive Belt replacement.) • Pull tension idler away from Blade Spindle Belt to relieve tension. • Remove belt.
Resumen del contenido incluido en la página 8
WHEEL DRIVE BELT REPLACEMENT REMOVAL • Stop engine, let all moving parts come to a complete stop. Disconnect spark plug. • Remove belt cover. • Remove Blade Drive Belt, (See “Blade Drive Belt replacement”) • Locate belt guide for wheel drive belt and loosen. • Remove wheel drive belt. INSTALLATION • Install belt as shown. • Adjust belt guide snug against motor pulley and back off ? ”. • Tighten belt guide hardware. • Install Blade Drive Belt (se
Resumen del contenido incluido en la página 9
OVERALL ASSEMBLY When ordering painted parts, please indicate with corresponding letters: C = Red Parts TK = Textured Black Parts
Resumen del contenido incluido en la página 10
REPLACEMENT PARTS When ordering painted parts, please indicate with corresponding letters: C = Red Parts; TK = Textured Black Parts (ex. 4207TK, 4237C) Item # Description Part # Item # Description Part # 1 Motor Base 4270 46 Tension Spring 682S 2 Wire Link BRS6H 47 1/2 x 1 9/16 Shoulder Bolt NB220 3 Link Spring T2SM 48 5/16 SAE Washer NB275 4 5/16-18 Serrated Flange Nut NB170 49 3/8-16 Grade 2 Nut NB212 5 5/16-18 x 21/2 Grade 5 Bolt NB138 50 5/16-18 Nylock Nut NB181 6 Shift Linkage 4282 51 Tens
Resumen del contenido incluido en la página 11
REPLACEMENT PARTS When ordering painted parts, please indicate with corresponding letters: C = Red Parts; TK = Textured Black Parts (ex. 4207TK, 4237C) Item # Description Part # 91 Sway Bar 4207 92 3/16 x 1 1/2 Keystock 2434 93 3/4 E-Clip NB621 94 3/4 x 10 GA Washer NB184 95 5/16-18 x 1/2 Set Screw NB192 96 4 Speed Transmission 4256 97 1/4 SAE Washer NB274 98 Shift Link 4223 99 1/4-28 x 3/4 Grade 5 Bolt NB620 100 Brake Mount 4273 101 Brake Mount Kit 4271 102 Transaxle Brake Pivot 4247 103 Tra
Resumen del contenido incluido en la página 12
THE FINISHING TOUCH 42” FINISH CUT MOWER SELF PROPELLED WALK BEHIND Each cutter has its own model number. Each engine has its own model number. The model number for the cutter will be found on the right hand side of the motor base. The model number for the engine will be found on the top of the blower fan housing. OWNER’S All cutter parts listed herein may be ordered directly from Swisher Mower & Machine Co. Inc. or your nearest Swisher MANUAL dealer. All engine parts may be ordered from the
