Manual de instrucciones de Yazoo/Kees RBSIC050, RBSITt550, RBSIT551, SBSIC050, RHON050

Resumen del contenido incluido en la página 1

Safety and Operator's Manual for
MODELS: RBSIC050
RBSIT550
RBSIT551
SBSIC050
RHON050
Professional Quality Lawn Care Equipment
since 1945
Thank you for buying a YAZOO/KEES! Before operating your new power rake, read,
understand and follow the important safety instructions and the other instructions con-
tained in this manual. Lawnmowers and all power equipment, can be potentially danger-
ous if used improperly. SAFETY REQUIRES GOOD JUDGEMENT, CAREFUL USE
IN ACCORDANCE WITH INSTRUCTIONS AND COMMO

Resumen del contenido incluido en la página 2

IMPORTANT SAFETY INSTRUCTIONS WARNING: Failure to comply with the following instructions may result in serious injury to the operator or other persons. The owner of the machine must understand these instructions, and must allow only persons who understand these instructions to operate the machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance which might impair vision, dexterity or judgment. If you have any questions about y

Resumen del contenido incluido en la página 3

FAMILIARIZATION Figure 1 NOMENCLATURE The nomenclature drawing above (Figure 1) shows the This manual has been prepared for the operators of the essential parts of the Yazoo/Kees Power Rake/Slicer. It is Yazoo/Kees Power Rake, Model RBSIC050 and Slicer, recommended that all operators of this equipment become Model SBSIC050. Its purpose, aside from recommending thoroughly familiar with the controls, parts and operation of operating instructions and routine service requirements, is t

Resumen del contenido incluido en la página 4

OPERATING INSTRUCTIONS BEFORE OPERATING: Shaft rotation is stopped by releasing the CLUTCH CONTROL Be thoroughly familiar with all controls and how to use them BAIL. See Figure 3. before operating the Dethatcher/Slicer. Make the following checks and perform the service as required before each start up. PRE-START CHECK LIST CHECK ENGINE OIL and bring level up to full. (Refer to engine manual for oil specifications). CHECK AIR CLEANER and service according to instructions in Engine Manual. FILL

Resumen del contenido incluido en la página 5

OPERATING INSTRUCTIONS STEP 2: On cold starts, move the CHOKE CONTROL on the engine forward into “CHOKE" position. See Figure 5. Figure 6 TRANSPORTING TO SITE To avoid damage to the machine, lawn or pavement, always move HEIGHT ADJUSTMENT LEVER to “TRANSPORT” position when moving from one location to another. Refer to Figure 4. Also, when transporting, the machine is more easily steered when tilted backwards onto Figure 5 its rear wheels. STEP 3: Move THROTTLE CONTROL to the “RUN” position.

Resumen del contenido incluido en la página 6

OPERATING INSTRUCTIONS 1. SET HANDLE BAR in desired position before engaging Extra holes in the Main Shaft are provided for longer life of the CLUTCH CONTROL. Main Shaft. If the hole holding the satellite shaft becomes distorted, rotate all four (4) satellite shafts to the next 2. SET HEIGHT ADJUSTMENT LEVER to desired raking adjacent hole. See Figure 8. height. 3. SET SPEED by moving THROTTLE CONTROL to desired speed setting. 4. BEGIN dethatching by stepping behind DETHATCHER, lifting “UP

Resumen del contenido incluido en la página 7

OPERATING INSTRUCTIONS Figure 9 Figure 10 SERVICE PARTS & ASSISTANCE To retain the original quality of your DETHATCHER/SLICER, use only genuine Yazoo/Kees replacement parts. Specify the model and serial number as found on the nameplate of your machine when contacting your Yazoo/Kees Dealer for parts or service assistance. Your Yazoo/Kees Dealer has a complete listing of all components. For engine parts, look for the engine manufacturer’s dealers under the heading ENGINES - gasoline in the yello

Resumen del contenido incluido en la página 8

SERVICE Figure 13 Figure 12 2. Lubricate SATELLITE SHAFTS on DETHATCHER with OFF SEASON STORAGE CLUTCH CONTROL CABLE Thoroughly clean all external surfaces, Lubricate CABLE with oil, graphite or a penetrating- Shaft Assembly (including Fingers or Slicers) and underside type spray lubricant as required. of unit before storing the unit. Grease all fittings and lubricate all wear surfaces with oil. BELT/CLUTCH ADJUSTMENT 1. Drain gasoline from fuel system and drain the crankcase Position of

Resumen del contenido incluido en la página 9

Yazoo/Kees Limited Two Year Warranty 1. This Limited two-year Warranty is issued by Yazoo/Kees Power Equipment, only to the original purchaser. The warranty period is limited to ninety (90) days when product is or has been used for rental purposes. 2. Yazoo/Kees warrants that all new equipment manufactured by Yazoo/Kees (Yazoo/Kees Prod- ucts), listed in paragraph 9 hereof, shall be free of defects in material and workmanship for the term described in paragraph 4 below. Component parts, equipm

Resumen del contenido incluido en la página 10

b. Normal maintenance services and normal maintenance items such as brakes, brake shoes, spark plugs, oil, air filters, mower blades, gauge wheels, skids and other wear items. c. Any Yazoo/Kees Product which had been altered or modified in any way. d. Any repair or replacement caused by customer neglect or lack of maintenance. (The purchaser is responsible for making sure that Yazoo/Kees Products are operated and serviced as directed in the applicable manual or service instruction. Incorrect u

Resumen del contenido incluido en la página 11

11