Manual de instrucciones de Apple PowerBook G3 Series

Resumen del contenido incluido en la página 1

Modem
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to your
equipment and may void your warranty.
Tools Required
• Phillips screwdriver.
• Flat-blade nylon tool.
Electrostatic Discharge (ESD)
Static electricity, a normal and natural phenomenon, builds up on your body as you walk around. You experience an electro-
static discharge (ESD) when you touch an object and feel a spark. ESD can cause damage

Resumen del contenido incluido en la página 2

5. Lift the top portion of the PowerBook keyboard up slightly near the top row of keys and pull it back far enough to release the small tabs that hold the bottom of the keyboard in place. 6. Flip the keyboard over and lay it on the palm rests. 7. Touch a metal surface inside the computer to discharge any static electricity. 8. Remove the three Phillips screws on the heatsink. 2 PowerBook G3 Series Bronze Keyboard - Modem

Resumen del contenido incluido en la página 3

9. Pull up on the handle and pull the heatsink forward. 10. Remove the two Phillips screws on the modem. 11. Use a flat-blade nylon tool to lift up the top, left side of the modem and release it from its connector. 12. Disconnect the EMI filter card cable on the right side of the modem. PowerBook G3 Series Bronze Keyboard - Modem 3

Resumen del contenido incluido en la página 4

Installing Modem, Heatsink and Keyboard 1. Reinstall the modem and the two Phillips screws. 2. Reinstall the heatsink and the three Phillips screws. 3. Flip the keyboard over and insert the small tabs at the bottom of the keyboard into the openings in the PowerBook case. 4. Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on the top portion of the keyboard. 5. Let go of the keyboard release tabs to secure the keyboard in place. 6. Replace the