Manual de instrucciones de Altinex Table Mount Computer Video + Audio Line Driver DA2000TM

Resumen del contenido incluido en la página 1

LINE DRIVERS
MANUAL PART NUMBER: 400-0174-001
DA2000TM
1-IN, 1-OUT TABLE MOUNT COMPUTER
VIDEO + AUDIO LINE DRIVER
USER’S GUIDE

Resumen del contenido incluido en la página 2

LINE DRIVERS TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 GENERAL ......................................................... 2 INSTALLATION................................................. 2 CLEANING ........................................................ 2 FCC / CE NOTICE............................................. 2 ABOUT YOUR DA2000TM ................................... 3 TECHNICAL SPECIFICATION ............................. 3 PRODUCT DESCRIPTION.....................

Resumen del contenido incluido en la página 3

LINE DRIVERS 1.4 FCC / CE NOTICE PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your • This device complies with part 15 of the FCC Rules. Operation is subject to the following two DA2000TM. Keep this manual handy for future conditions: (1) This device may not cause reference. These safety instructions are to ensure harmful interference, and (2) this device must the long life of your DA2000TM and to prevent fire accept any interference received, including and shoc

Resumen del contenido incluido en la página 4

LINE DRIVERS Ship Weight (pounds) 1.6 lb. (.73kg) ABOUT YOUR DA2000TM 2 Material Steel The DA2000TM is a computer video + stereo audio Finish Black Zinc line driver designed for mounting under a table or Front Panel White or Ivory to other surfaces in tight spots. Its extremely T° Operating 10°C -35°C compact form promotes inconspicuous attachment, T° Maximum 50°C yet still allows for active components necessary to Humidity 90% non-condensing drive high-resolution computer signals a distance of

Resumen del contenido incluido en la página 5

LINE DRIVERS PRODUCT DESCRIPTION 4 4

Resumen del contenido incluido en la página 6

LINE DRIVERS PIN No. OUTPUT SIGNAL ON 10-PIN PRODUCT DESCRIPTION (CON’T) MALE TERMINAL BLOCK 4.1 VIDEO INPUT 9 VERTICAL 10 SIGNAL RETURN The VGA computer input 15-pin HD connector on the front of the DA2000TM is connected to the Table 5. 10-pin Male terminal block for video output video output of a desktop computer. The 4.3 AUDIO INPUT & OUTPUT DA2000TM may be used with a six foot Male to Male VGA input cable (ALTINEX part # The DA2000TM accepts computer audio input and CB3706MR) and a six foot

Resumen del contenido incluido en la página 7

LINE DRIVERS APPLICATION DIAGRAM 5 Note that the coaxial cable’s braided shield is twisted into a single conductor with multiple strands. There is approximately ¼ inch of the center conductor exposed, and ½ inch of the center conductor shield exposed. OPERATION 7 INSTALLING YOUR DA2000TM 6 The DA2000TM will operate successfully as long Step 1. Mount the DA2000TM to the underside of as all cables are attached properly and other a table and apply 9VDC power to the unit. The LED should turn red, i

Resumen del contenido incluido en la página 8

LINE DRIVERS ACCESSORIES 8 FREQUENTLY ASKED QUESTIONS 9 Model No. Description No: Question Answer INPUT STANDARD 15-PIN VGA MALE TO How many The is optimized 1 DA2000TM CABLES MALE (COAXIAL TYPE CABLE feet of cable for 75ft, but longer or shorter INTERNALLY) can I use with lengths may be used. CB3703MR 3 ft the CB3706MR 6 ft DA2000TM? 15 ft CB3715MR 2 Is the input The DA2000TM CB3725MR 25 ft cable type may be used with two types CB1206AU 3.5mm cable for audio important of input cables — VGA Y-

Resumen del contenido incluido en la página 9

LINE DRIVERS 11.2 RETURN POLICY TROUBLESHOOTING GUIDE 10 It is very important to ALTINEX that you receive We have carefully tested and have found no the products that you have ordered and that this problems in the supplied DA2000TM unit; however, product meets your expectations. In the unlikely we would like to offer the following suggestions: event, that an ALTINEX product needs to be • Make sure that the display equipment is returned please follow the policy below: compatible with the source e