Manual de instrucciones de HP (Hewlett-Packard) DesignJet 130

Resumen del contenido incluido en la página 1

setup
hp photosmart
130
guide
1 unpack your printer 2 connect the power adapter
Print cartridge
HP #57
Make sure you place the printer at least 10 inches away
1
Sample index
Printer
from a wall or any obstuction to allow space for the paper
cards
to move during printing.
Sample photo
1. Insert the round end of the power adapter into the
paper
power adapter connection on the back of your printer.
2
Software and Printer
Power adapter
Help on CD 2. Plug the power adapter into a working electrical o

Resumen del contenido incluido en la página 2

4 install the print cartridge Print cartridge cradle Copper contacts 1 1. Pull the pink pull-tab to remove the 3 protective tape from the print cartridge. 2. Open the print cartridge door by pulling the door down. 3. Place the print cartridge in the print Ink 4 cartridge cradle with the copper contacts Print cartidge nozzles door facing toward the inside of the printer Do not touch the ink and the ink nozzles facing down. 2 nozzles or copper 4. Push the print cartridge into the cradle contacts o