Resumen del contenido incluido en la página 1
Spectra BlueScale Vision
Camera User Guide
Resumen del contenido incluido en la página 2
P/N: 956YH60001 Copyright © 2007. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. ii
Resumen del contenido incluido en la página 3
Table of Contents CHAPTER 1 INTRODUCTION .............................................................................................. 1 Overview ............................................................................................................................. 1 Physical Details - Network Camera .................................................................................. 3 Package Contents ...................................................................................
Resumen del contenido incluido en la página 4
CHAPTER 6 WINDOWS MONITOR/PLAYBACK/IP RECORDER UTILITY ............ 53 Overview ........................................................................................................................... 53 Installation ........................................................................................................................ 53 System Tray Icon ............................................................................................................. 54 Main Screen ........
Resumen del contenido incluido en la página 5
Chapter 1 1 Introduction This Chapter provides details of the Network Camera's features, components and capabilities. Overview The Network Camera has an Integrated Microcomputer and a high quality CMOS digital-Image-Sensor, enabling it to display high quality live streaming video over your wired LAN, the Internet, and for the Network Camera, an 802.11g Wireless LAN. Using enhanced MPEG-4 technologies, the Network Camera is able to stream high quality video and audio directly to your PC.
Resumen del contenido incluido en la página 6
• Viewing/Recording Utility. A user-friendly Windows utility is provided for viewing live video. For periods when you are absent, or for scheduled recording, this application also allows you to record video to an ASF file on your PC. The recorded files are in a standard Windows Media format, and thus usable by a wide variety of programs if required. Up to 5 users can view the live video simultaneously by using the provided utility. • Motion Detection. This feature can detect motion in t
Resumen del contenido incluido en la página 7
Physical Details - Network Camera Front - Network Camera Lens No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remain clean. The image quality is degraded if the lens cover is dirty or smudged. Microphone The built-in microphone is mounted on the front. Power LED On - Power on. (Green) Off - No power. Blinking - The Power LED will blink during start up. This will take 15 to 20 seconds. Active LED Off - Camera is not capturing vi
Resumen del contenido incluido en la página 8
Package Contents The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. 1. Network Camera 2. Antenna (Wireless Model Only) 3. Power adapter 4. Installation CD-ROM 5. Quick Installation Guide 4
Resumen del contenido incluido en la página 9
Chapter 2 2 Basic Setup This Chapter provides details of installing and configuring the Network Camera. System Requirements • To use the wired LAN interface, a standard 10/100BaseT hub or switch and network cable is required. • To use the Wireless interface, other Wireless devices must be compliant with the IEEE802.11b or IEEE802.11g specifications. All Wireless stations must use compatible settings. The default Wireless settings are: Mode: Infrastructure SSID: ANY Wireless Secur
Resumen del contenido incluido en la página 10
4. Check the LEDs • The Power LED will turn on briefly, then start blinking. It will blink during startup, which takes 15 to 20 seconds. After startup is completed, the Power LED should remain ON. • The Network LED should be ON. For more information, refer to Physical Details - Network Camera in Chapter 1. Setup using the Windows Wizard Initial setup should be performed using the supplied Windows-based setup Wizard. This program can locate the Network Camera even if its IP address is
Resumen del contenido incluido en la página 11
2. The next screen, shown below, will list all the Network Cameras on your LAN. Figure 3: Camera List Screen • Select the desired Camera from the list on the left. The current settings for the selected Camera will be displayed in the table on the right. • Click Next to continue. 3. You will be prompted to enter the Administrator Name and Administrator Password, as shown below. • If using the default values, enter administrator for the name, and leave the password blank. • Otherwise
Resumen del contenido incluido en la página 12
4. This screen allows you to enter a suitable Description, and set the correct Time Zone, Date, and Time. Make any desired changes, then click Next to continue. Figure 5: Camera Settings 5. On the following IP Address Settings screen, shown below, choose Fixed IP Address or Dynamic IP Address. Figure 6: Fixed or Dynamic IP Selection • Fixed IP Address is recommended, and can always be used. • Dynamic IP Address can only be used if your LAN has a DCHP Server. Click Next to continue.
Resumen del contenido incluido en la página 13
6. If you chose Fixed IP Address, the following TCP/IP Settings screen will be displayed. Figure 7: TCP/IP Settings • Enter an unused IP Address from within the address range used on your LAN. • The Subnet Mask and Default Gateway fields must match the values used by PCs on your LAN. • The Primary DNS address is required in order to use the E-mail alert or Dynamic DNS features. Enter the DNS (Domain Name Server) address recommended by your ISP. • The Secondary DNS is optional. If prov
Resumen del contenido incluido en la página 14
8. Click OK to confirm that you want to save the new settings. If you want to cancel your changes, click Cancel. Figure 9: Confirm Screen 9. After clicking OK, you will see the screen below. Figure 10: Final Screen Clicking the Install Utility button will install the Viewing/Recording utility described in Chapter 6 - Windows Viewing/Recording Utility. 10. Click Exit to end the Wizard. Setup is now complete. 10
Resumen del contenido incluido en la página 15
Chapter 3 3 Viewing Live Video This Chapter provides basic information about viewing live video. Overview After finishing setup via the Windows-based Wizard, all LAN users can view live video using Internet Explorer on Windows. This Chapter has details of viewing live video using Internet Explorer. But many other powerful features and options are available: • To view multiple cameras simultaneously, or record video (either interactively or by schedule), you should install the Windows
Resumen del contenido incluido en la página 16
4. When you connect, the following screen will be displayed. Figure 11: Home Screen 5. Click View Video. 6. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Network Camera administrator. 7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the example below. You must install this ActiveX component (OC
Resumen del contenido incluido en la página 17
Connecting to a Camera via the Internet You can NOT connect to a camera via the Internet unless the camera Administrator has configured both the camera and the Internet Gateway/Router used by the camera. See Making Video available from the Internet in Chapter 4 - Advanced Viewing Setup for details of the required configuration. Also, you need a broadband Internet connection to view video effectively. Dial-up connections are NOT supported. To establish a connection from your PC to the Netw
Resumen del contenido incluido en la página 18
6. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Network Camera administrator. 7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the example below. You must install this ActiveX component (OCX or CAB file) in order to view the Video stream in Internet Explorer. Click the "Yes" button to install the
Resumen del contenido incluido en la página 19
General Options These options are always available, regardless of the type of camera you are connected to. Camera Patrol. Move through the Preset positions in the sequence defined by the Camera Administrator. Camera Auto Pan. Click this to have the camera moved from left to right automatically. Motion Detection. Click this button to have the camera moved to the Motion Detection Preset position. Direct P/T. Use this to move the camera to the Pan/Tilt position directly. Resolut
Resumen del contenido incluido en la página 20
Chapter 4 4 Advanced Viewing Setup This Chapter provides information about the optional settings and features for viewing video via the Network Camera. This Chapter is for the Camera Administrator only. Introduction This chapter describes some additional settings and options for viewing live Video: • Adjusting the video image • Controlling user access to the live video stream • Making video available from the Internet • Using the Motion Detection feature Adjusting the Video Image If
