Résumé du contenu de la page N° 1
Spectra BlueScale Vision
Camera User Guide
Résumé du contenu de la page N° 2
P/N: 956YH60001 Copyright © 2007. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. ii
Résumé du contenu de la page N° 3
Table of Contents CHAPTER 1 INTRODUCTION .............................................................................................. 1 Overview ............................................................................................................................. 1 Physical Details - Network Camera .................................................................................. 3 Package Contents ...................................................................................
Résumé du contenu de la page N° 4
CHAPTER 6 WINDOWS MONITOR/PLAYBACK/IP RECORDER UTILITY ............ 53 Overview ........................................................................................................................... 53 Installation ........................................................................................................................ 53 System Tray Icon ............................................................................................................. 54 Main Screen ........
Résumé du contenu de la page N° 5
Chapter 1 1 Introduction This Chapter provides details of the Network Camera's features, components and capabilities. Overview The Network Camera has an Integrated Microcomputer and a high quality CMOS digital-Image-Sensor, enabling it to display high quality live streaming video over your wired LAN, the Internet, and for the Network Camera, an 802.11g Wireless LAN. Using enhanced MPEG-4 technologies, the Network Camera is able to stream high quality video and audio directly to your PC.
Résumé du contenu de la page N° 6
• Viewing/Recording Utility. A user-friendly Windows utility is provided for viewing live video. For periods when you are absent, or for scheduled recording, this application also allows you to record video to an ASF file on your PC. The recorded files are in a standard Windows Media format, and thus usable by a wide variety of programs if required. Up to 5 users can view the live video simultaneously by using the provided utility. • Motion Detection. This feature can detect motion in t
Résumé du contenu de la page N° 7
Physical Details - Network Camera Front - Network Camera Lens No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remain clean. The image quality is degraded if the lens cover is dirty or smudged. Microphone The built-in microphone is mounted on the front. Power LED On - Power on. (Green) Off - No power. Blinking - The Power LED will blink during start up. This will take 15 to 20 seconds. Active LED Off - Camera is not capturing vi
Résumé du contenu de la page N° 8
Package Contents The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. 1. Network Camera 2. Antenna (Wireless Model Only) 3. Power adapter 4. Installation CD-ROM 5. Quick Installation Guide 4
Résumé du contenu de la page N° 9
Chapter 2 2 Basic Setup This Chapter provides details of installing and configuring the Network Camera. System Requirements • To use the wired LAN interface, a standard 10/100BaseT hub or switch and network cable is required. • To use the Wireless interface, other Wireless devices must be compliant with the IEEE802.11b or IEEE802.11g specifications. All Wireless stations must use compatible settings. The default Wireless settings are: Mode: Infrastructure SSID: ANY Wireless Secur
Résumé du contenu de la page N° 10
4. Check the LEDs • The Power LED will turn on briefly, then start blinking. It will blink during startup, which takes 15 to 20 seconds. After startup is completed, the Power LED should remain ON. • The Network LED should be ON. For more information, refer to Physical Details - Network Camera in Chapter 1. Setup using the Windows Wizard Initial setup should be performed using the supplied Windows-based setup Wizard. This program can locate the Network Camera even if its IP address is
Résumé du contenu de la page N° 11
2. The next screen, shown below, will list all the Network Cameras on your LAN. Figure 3: Camera List Screen • Select the desired Camera from the list on the left. The current settings for the selected Camera will be displayed in the table on the right. • Click Next to continue. 3. You will be prompted to enter the Administrator Name and Administrator Password, as shown below. • If using the default values, enter administrator for the name, and leave the password blank. • Otherwise
Résumé du contenu de la page N° 12
4. This screen allows you to enter a suitable Description, and set the correct Time Zone, Date, and Time. Make any desired changes, then click Next to continue. Figure 5: Camera Settings 5. On the following IP Address Settings screen, shown below, choose Fixed IP Address or Dynamic IP Address. Figure 6: Fixed or Dynamic IP Selection • Fixed IP Address is recommended, and can always be used. • Dynamic IP Address can only be used if your LAN has a DCHP Server. Click Next to continue.
Résumé du contenu de la page N° 13
6. If you chose Fixed IP Address, the following TCP/IP Settings screen will be displayed. Figure 7: TCP/IP Settings • Enter an unused IP Address from within the address range used on your LAN. • The Subnet Mask and Default Gateway fields must match the values used by PCs on your LAN. • The Primary DNS address is required in order to use the E-mail alert or Dynamic DNS features. Enter the DNS (Domain Name Server) address recommended by your ISP. • The Secondary DNS is optional. If prov
Résumé du contenu de la page N° 14
8. Click OK to confirm that you want to save the new settings. If you want to cancel your changes, click Cancel. Figure 9: Confirm Screen 9. After clicking OK, you will see the screen below. Figure 10: Final Screen Clicking the Install Utility button will install the Viewing/Recording utility described in Chapter 6 - Windows Viewing/Recording Utility. 10. Click Exit to end the Wizard. Setup is now complete. 10
Résumé du contenu de la page N° 15
Chapter 3 3 Viewing Live Video This Chapter provides basic information about viewing live video. Overview After finishing setup via the Windows-based Wizard, all LAN users can view live video using Internet Explorer on Windows. This Chapter has details of viewing live video using Internet Explorer. But many other powerful features and options are available: • To view multiple cameras simultaneously, or record video (either interactively or by schedule), you should install the Windows
Résumé du contenu de la page N° 16
4. When you connect, the following screen will be displayed. Figure 11: Home Screen 5. Click View Video. 6. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Network Camera administrator. 7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the example below. You must install this ActiveX component (OC
Résumé du contenu de la page N° 17
Connecting to a Camera via the Internet You can NOT connect to a camera via the Internet unless the camera Administrator has configured both the camera and the Internet Gateway/Router used by the camera. See Making Video available from the Internet in Chapter 4 - Advanced Viewing Setup for details of the required configuration. Also, you need a broadband Internet connection to view video effectively. Dial-up connections are NOT supported. To establish a connection from your PC to the Netw
Résumé du contenu de la page N° 18
6. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Network Camera administrator. 7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the example below. You must install this ActiveX component (OCX or CAB file) in order to view the Video stream in Internet Explorer. Click the "Yes" button to install the
Résumé du contenu de la page N° 19
General Options These options are always available, regardless of the type of camera you are connected to. Camera Patrol. Move through the Preset positions in the sequence defined by the Camera Administrator. Camera Auto Pan. Click this to have the camera moved from left to right automatically. Motion Detection. Click this button to have the camera moved to the Motion Detection Preset position. Direct P/T. Use this to move the camera to the Pan/Tilt position directly. Resolut
Résumé du contenu de la page N° 20
Chapter 4 4 Advanced Viewing Setup This Chapter provides information about the optional settings and features for viewing video via the Network Camera. This Chapter is for the Camera Administrator only. Introduction This chapter describes some additional settings and options for viewing live Video: • Adjusting the video image • Controlling user access to the live video stream • Making video available from the Internet • Using the Motion Detection feature Adjusting the Video Image If
