Resumen del contenido incluido en la página 1
Maintenance Manual - English
PRIMERGY RX900 S1 Server
Maintenance Manual
Edition August 2010
Resumen del contenido incluido en la página 2
Comments… Suggestions… Corrections… The User Documentation Department would like to know your opinion of this manual. Your feedback helps us optimize our documentation to suit your individual needs. Feel free to send us your comments by e-mail to manuals@ts.fujitsu.com. Certified documentation according to DIN EN ISO 9001:2008 To ensure a consistently high quality standard and user-friendliness, this documentation was created to meet the regulations of a quality management system which compli
Resumen del contenido incluido en la página 3
Before reading this manual For your safety This manual contains important information for safely and correctly using this product. Carefully read the manual before using this product. Pay particular attention to the accompanying manual "Safety Notes and Regulations" and ensure these safety notes are understood before using the product. Keep this manual and the manual "Safety Notes and Regulations" in a safe place for easy reference while using this product. Radio interference This product
Resumen del contenido incluido en la página 4
These uses include control of nuclear reactions in nuclear power plants, automatic airplane flight control, air traffic control, traffic control in mass transport systems, medical devices for life support, and missile guidance control in weapons systems (hereafter, "high safety use"). Customers should not use this product for high safety use unless measures are in place for ensuring the level of safety demanded of such use. Please consult the sales staff of Fujitsu if intending to use this
Resumen del contenido incluido en la página 5
Only for the Japanese market: I Although described in this manual, some sections do not apply to the Japanese market. These options and routines include: – CSS (Customer Self Service) – USB Flash Module (UFM) – Replacing the lithium battery RX900 S1 Maintenance Manual 5
Resumen del contenido incluido en la página 6
6 Maintenance Manual RX900 S1
Resumen del contenido incluido en la página 7
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1.1 Where to find which information? . . . . . . . . . . . . . . . 20 1.1.1 Documents you need at hand . . . . . . . . . . . . . . . . . . 21 1.1.2 Accessing PRIMERGY documentation . . . . . . . . . . . . . 24 1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . 24 2 Before you start . . . . . . . .
Resumen del contenido incluido en la página 8
Contents 4.9 Closing the rack door . . . . . . . . . . . . . . . . . . . . . . 51 5 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 53 5.1 Installing a hot-plug Power Supply Unit (PSU) . . . . . . . . 54 5.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 54 5.1.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 54 5.1.3 Removing a dum
Resumen del contenido incluido en la página 9
Contents 5.4.17 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 77 6 Hard disk and solid state drives . . . . . . . . . . . . . . . . 79 6.1 Installing the HDD/SSD module . . . . . . . . . . . . . . . . 80 6.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 80 6.1.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 80 6.1.3 Removing th
Resumen del contenido incluido en la página 10
Contents 7 Fan modules . . . . . . . . . . . . . . . . . . . . . . . . . . 101 7.1 Replacing a defective fan module . . . . . . . . . . . . . . 102 7.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 102 7.1.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . 102 7.1.3 Opening the fan cover . . . . . . . . . . . . . . . . . . . . . 102 7.1.4 Replacing th
Resumen del contenido incluido en la página 11
Contents 8.5.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 133 8.5.3 Deactivating the expansion card . . . . . . . . . . . . . . . . . 133 8.5.4 Pulling the expansion card out of the slot . . . . . . . . . . . . 134 8.5.5 Removing the expansion card from the removal tool . . . . . . 135 8.5.6 Removing the engaging hooks . . . . . . . . . . . . . . . . . 136 8.5.7 Inserting a retaining plate in the r
Resumen del contenido incluido en la página 12
Contents 8.9.5 Inserting the expansion card in the slot . . . . . . . . . . . . . 161 8.9.6 Installing the PCI Riser (if applicable) . . . . . . . . . . . . . . 162 8.9.7 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 162 8.10 Replacing the Modular RAID controller . . . . . . . . . . . 163 8.10.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 163 8.10.2 Starting the task . .
Resumen del contenido incluido en la página 13
Contents 9.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 188 9.2.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 188 9.2.3 Identifying a fault on the CPUMEMR . . . . . . . . . . . . . . 189 9.2.4 Removing the CPUMEMR . . . . . . . . . . . . . . . . . . . . 190 9.2.5 Reinstalling a new CPUMEMR . . . . . . . . . . . . . . . . . 190 9.2.6 Completing the t
Resumen del contenido incluido en la página 14
Contents 10.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 215 10.3.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . 215 10.3.3 Removing the heat sink . . . . . . . . . . . . . . . . . . . . . 216 10.3.4 Applying the thermal paste . . . . . . . . . . . . . . . . . . . 217 10.3.5 Installing the heat sink . . . . . . . . . . . . . . . . . . . . . 219
Resumen del contenido incluido en la página 15
Contents 12.4 Replacing the I/O board . . . . . . . . . . . . . . . . . . . . 242 12.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 242 12.4.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 242 12.4.3 Removing the PCI Riser . . . . . . . . . . . . . . . . . . . . . 243 12.4.4 Removing the I/O board . . . . . . . . . . . . . . . . . . . . . 244
Resumen del contenido incluido en la página 16
Contents 14.3.3 Removing the UFM . . . . . . . . . . . . . . . . . . . . . . . 268 14.3.4 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 269 14.4 Installing the TPM . . . . . . . . . . . . . . . . . . . . . . . 270 14.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 270 14.4.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . 27
Resumen del contenido incluido en la página 17
Contents 15.1.9 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 300 15.2 Replacing the control panel cable . . . . . . . . . . . . . . . 301 15.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 301 15.2.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 302 15.2.3 Removing the control panel . . . . . . . . . . . . . . . . . . . 302 15.2.
Resumen del contenido incluido en la página 18
Contents 15.5.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 333 15.5.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . 334 15.5.3 Sliding the local service display outward . . . . . . . . . . . . 335 15.5.4 Disconnecting the cables . . . . . . . . . . . . . . . . . . . . 336 15.5.5 Removing the fan cage . . . . . . . . . . . . . . . . . . . . . 337 15.5.6 Remo
Resumen del contenido incluido en la página 19
1 Introduction This Maintenance manual provides procedures for: ● Replacing faulty units to get the system back to normal operation. ● Expanding the server configuration by using optional hardware components available within the same release to meet new requirements. ● Upgrading the server by replacing existing hardware with high-capacity components to meet new requirements or to react on release upgrades that provide new functionality or require additional capacity. The manual at hand focuss
Resumen del contenido incluido en la página 20
Introduction 1.1 Where to find which information? While the Maintenance manual focuses on maintenance procedures to bring the system back to normal operation, individual manuals provide detailed background information on the board layout, indicators, or BIOS Setup. Other documentation such as service foils attached to the server covers or the illustrated spares catalogue available in the internet (not applicable for the Japanese market) help you to organize your work, see figure 1. This sec
