Manual de instrucciones de HP (Hewlett-Packard) SAS BL

Resumen del contenido incluido en la página 1

HP StorageWorks
Overview
This document describes procedures for installing an HP StorageWorks
3Gb SAS BL Switch installation
3Gb SAS BL Switch (3Gb SAS Switch) in an HP c-Class enclosure. For
more information about this switch, mezzanines, c-Class enclosures, and
instructions
other BladeSystem components, see the HP BladeSystem website http:/
/www.hp.com/go/bladesystem. Product pages, overviews, QuickSpecs,
and user documents for all BladeSystem products are accessible from
this website.
Front p

Resumen del contenido incluido en la página 2

1. Remove the air baffle from the selected interconnect bay. Planning the configuration Before installing the switch, analyze the servers and storage and develop a plan for controlling access to the storage. After installing the switch, configure the switch and the storage per the plan (“Configuring the switch ” on page 3). Selecting the interconnect bay Each c3000 and c7000 interconnect bay maps to servers via the slot in which the mezzanine cards are installed in the server blades. When select

Resumen del contenido incluido en la página 3

IMPORTANT: IMPORTANT: Do not connect SAS cables to external storage enclosures until When two 3Gb SAS BL Switches are installed in the same row you have accessed the switch and confirmed that the desired of an enclosure, make sure that they are running the same firmware version is installed on the switch (Accessing the switch). firmware version. Accessing the switch Cabling the switch The switch is configured and managed through the Onboard After confirming the firmware version, connect SAS cabl