Manual de instrucciones de Bogen CommunicationsFMH15T

Resumen del contenido incluido en la página 1

FMH15T
Flange Mounted, 15W,
Horn Loudspeaker
Installation Instructions
The FMH15T is designed to be mounted by its flange. Figure 1 shows the mounting hole
locations.
Components
Bogen recommends using the SGHD8 Grille with the FMHAR8 Adapter Ring for proper
mounting of the horn.The SGHD8 Grille will mount to the BBFM6 Flush Mount Enclosure
or BBSM6 Surface Mount Enclosure. See Figure 3 on other side for mounting details.
1. Make the electrical connections (see Figure 2). Connect the 70V or 25V “

Resumen del contenido incluido en la página 2

Assembly Instructions 1) Place gasket supplied with FMH15T onto FMHAR8 Adapter Ring over the studs. Then mount FMH15T to FMHAR8 Adapter Ring, sliding flange hole over adapter ring studs and secure with nuts supplied with adapter ring. 2) Slide FMH15T/FMHAR8 assembly over studs in SGHD8 Grille and secure with nuts supplied with grille. 3) Mount BBSM6 or BBFM6 enclosure as necessary. 4) Use 4 white security screws and tool supplied with SGHD8 Grille to mount the speaker/grille assembly onto the en