Manual de instrucciones de Harbor Freight Tools 92043

Resumen del contenido incluido en la página 1

HITCH COVER WITH BRAKE LIGHT HITCH COVER WITH BRAKE LIGHT
HITCH COVER WITH BRAKE LIGHT HITCH COVER WITH BRAKE LIGHT HITCH COVER WITH BRAKE LIGHT
92043
ASSEMBLY AND OPERATING INSTRUCTIONS
SPECIFICATIONS
Item Description
Lens Polystyrene, replaceable
Light Source 12 bright red LED’s
Power Requirement 12 VDC
Power Wire 16 AWG x 2C x 13 (L) inches; Flat four trailer
plug (4-pin slip fit)
Hitch Pin Hole Diameter 5/8 inch
Dimensions 3-1/4 (square) x 4-3/8 (D) inches
Hitch Receiver Depth Two inches on

Resumen del contenido incluido en la página 2

Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using this product, basic safety precautions should always be followed to reduce the risk of personal injury and d

Resumen del contenido incluido en la página 3

Unpacking When unpacking, check to make sure that all parts are included. Refer to the Assembly Drawing and Parts List on the next page. Installation During installation, refer to the Assembly Drawing. 1. Set the vehicle emergency brake and remove the ignition keys. 2. Plug the vehicle’s trailer brake light connector (Flat 4 trailer plug) into the Hitch Cover Brake Light Power Wire (A5) plug. If the vehicle does not have an existing trailer brake light cable installed, have one installed by a qu

Resumen del contenido incluido en la página 4

Parts List Part No. Description A1 Lens A2 LED Lights (12V-2W) A3 Power Wire with Plug A4 Lens Housing A5 Receiver Gasket B1 Hitch Pin B2 Cotter Pin NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Assembly Drawing PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATI