Manual de instrucciones de Brinkmann 810-8750-S

Manual de instrucciones del aparato Brinkmann 810-8750-S

Aparato: Brinkmann 810-8750-S
Categoría: Barbacoa de carbón
Fabricante: Brinkmann
Tamaño: 15.37 MB
Fecha de añadido: 7/8/2013
Número de páginas: 88
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Brinkmann 810-8750-S. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Brinkmann 810-8750-S.

Para tu comodidad

Si ver los manuales de instrucción de Brinkmann 810-8750-S directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Brinkmann 810-8750-S en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Brinkmann 810-8750-S a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Brinkmann 810-8750-S Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 88 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Brinkmann 810-8750-S, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Brinkmann 810-8750-S. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

NOTICE TO
PROFESSIONAL INSTALLER:
LEAVE THESE INSTRUCTIONS WITH
THE GRILL OWNER FOR FUTURE
REFERENCE.
AVISO PARA EL
INSTALADOR:
ENTREGUE ESTAS
INSTRUCCIONES AL PROPIETARIO
DE LA PARRILLA PARA
REFERENCIA FUTURA.
Universal Natural Gas Conversion Kit
Equipo Universal de Conversión a
Gas Natural
PROFESSIONAL INSTALLATION MANUAL
MANUAL DE INSTALACIÓN PROFESIONAL
CONVERTS THE FOLLOWING CHARMGLOW GRILLS FROM PROPANE TO
NATURAL GAS: MODEL NUMBERS 810-7405-S, 810-8500-S, 810-8530-S,
810-8532-S, 810-855

Resumen del contenido incluido en la página 2

IMPORTANT SAFETY WARNINGS WE WANT YOU TO USE YOUR CONVERSION KIT FOR YOUR GRILL AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT THE ATTENTION TO POSSIBLE HAZARDS AS THE GRILL IS CONVERTED AND USED AS A NATURAL GAS GRILL. WHEN YOU SEE THE SAFETY ALERT SYMBOL PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE CONVERTING AND OPERATING YOUR GRILL. DANGER IF YOU SMELL GAS: 1. Shut off gas to the appliance. 2.

Resumen del contenido incluido en la página 3

TABLE OF CONTENTS General Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 Conversion Instructions 810-8905-S, 810-8907-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Conversion Instructions 810-8750-S, 810-8752-S . . . . . . . . . .

Resumen del contenido incluido en la página 4

DANGER Connection should be made by a professional service technician. Supply the technician with a copy of these instructions. Incorrect connection can result in a gas leak with possibility of fire. GENERAL WARNINGS WARNING • Never use liquid propane gas in a unit designed for natural gas. • Never use charcoal or wood briquette in a gas grill. Flavoring chips must be contained in a metal smoking box to contain ash and prevent fires. • Leak test all connections before first use, even if grill wa

Resumen del contenido incluido en la página 5

ASSEMBLY INSTRUCTIONS YOU MUST BE A PROFESSIONAL SERVICE TECHNICIAN TO CONVERT THIS GRILL. READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING THE CONVERTED GRILL. The following tools are required to assemble the Conversion Kit: • Phillips Head Screwdriver • Adjustable Wrench • 3/4”Wrench PARTS CONTENTS Gas Orifice Tool Large Wrench L 8905/8907 Rotisserie Burner 1.51mm Valve Orifice x 1 Pc (BLUE) Small Wrench Large Stop Plate x 6 Pcs. 8750/

Resumen del contenido incluido en la página 6

CONVERSION Gas Manifold Back Panel Exit Connection INSTRUCTIONS 810-8905-S & 810-8907-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. Note: Make sure all control knobs are in the off position,

Resumen del contenido incluido en la página 7

Step 4 Remove two screws from each Wood Chip Drawer burner "foot" using a screwdriver. Remove wood chip drawer to get access to the wood chip burner. Remove one screw from the wood chip burner. Carefully lift each burner up and away from valve openings. Set aside for later use. Side View Step 5 Using the gas orifice tool, remove the LP brass orifice from the tip of Fire Box Front Panel each gas valve assembly. Repeat this step for all main burner and wood chip burner valves in your grill. Note:

Resumen del contenido incluido en la página 8

810-8905-S & 810-8907-S SIDE BURNERS CAUTION: Only use specified natural gas orifice for your grill. Step 8 Small Wrench Brass Cap Remove the side burner brass cap by using the small wrench to unscrew the two small screws. Step 9 Remove access panel on left side of grill for better view of gas orifice. Step 10 Use the gas orifice tool to remove LP brass orifice from the hole on the top of side burner. Step 11 Using gas orifice tool, install 1.25mm (GREEN) natural gas orifice. Be careful not to

Resumen del contenido incluido en la página 9

810-8905-S & 810-8907-S ROTISSERIE BURNERS Cover Bolts CAUTION: Only use specified natural gas orifice for your grill. Note: It is helpful to keep the screws with the components as they are removed for ease of reassembly. Step 13 Remove rotisserie cover bolts and remove rotisserie cover to gain access to the rotisserie LP gas orifice on back side of grill. Step 14 Using an adjustable wrench to hold the gas line secure, use the open end wrench provided to loosen the gas line retaining nut. With

Resumen del contenido incluido en la página 10

CONVERSION Right INSTRUCTIONS Accessory Drawer 810-8750-S & 810-8752-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. Gas Manifold Connection Note: Make sure all control knobs are in the off po

Resumen del contenido incluido en la página 11

Main Burner Note: Step 4 only applies to model 810-8750-S. Step 4 Remove screw from each burner "foot" using a screwdriver. Carefully lift each burner up and away from Sear Burner valve openings. Set aside for later use. 10

Resumen del contenido incluido en la página 12

CAUTION: Some parts may Side View contain sharp edges. Wear protective gloves if necessary. Fire Box Front Panel Step 5 Using the one of the gas orifice tool provided remove the LP brass orifice from the tip of each gas valve assembly. Wrench Note: All orifices of the grill, except rotisserie, are double orifices LP Gas Orifice type (LP gas and natural gas). You only remove the LP gas orifice tip. Step 6 Remove all the control knobs from the control panel and set aside for later use. Step 7 Figu

Resumen del contenido incluido en la página 13

810-8750-S & 810-8752-S SIDE BURNERS CAUTION: Only use specified natural gas orifice for your grill. Small Wrench Step 8 Brass Cap Remove the left side shelf by unscrewing the four bolts. Step 9 Remove the side burner brass cap by using the small wrench to unscrew the two small screws. Step 10 Remove access panel on left side of grill for better view of gas orifice. Step 11 Use the gas orifice tool to remove LP brass orifice from the hole on the top of side burner. Step 12 Using gas orifice tool

Resumen del contenido incluido en la página 14

CONVERSION INSTRUCTIONS 810-8550-S, 810-8552-S & 810-8555-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage Gas Manifold Nut and void your grill warranty. Note: Make sure all control knobs are in the off position, LP tank v

Resumen del contenido incluido en la página 15

Step 4 Remove screw from each burner "foot" using a screwdriver. Carefully lift each burner up and away from valve openings. Set aside for later use. Side View Step 5 Use the gas orifice tool to remove the LP brass orifice from main burner Firebox Front Panel valves through the hole on the firebox front panel. Repeat this step for all main, side and rotisserie burner valves in your grill.The side burner valve orifice is under the side shelf. LP Gas Orifice Note: All orifices of the grill, except

Resumen del contenido incluido en la página 16

Step 7 Figure 1 shows valve stem and bezel with the control knob removed. Take five large stop plates from the component card and place them over Stop Plate the main and side burner valve stems Tab as illustrated (Figure 2). Take the small stop plate from the component card and place it over the rotisserie burner Stop Pin valve stem (Figure 3). Verify the tab and the stamped letter on the stop plates face out. Replace control knobs Figure 2 Figure 1 when finished. WARNING: We recommend and Stop

Resumen del contenido incluido en la página 17

810-8550-S, 810-8552-S & 810-8555-S ROTISSERIE BURNERS CAUTION: Only use specified natural gas orifice for your grill. Note: It is helpful to keep the screws with the components as they are removed for ease of reassembly. Step 10 Remove the two screws of panel to gain access to the rotisserie LP valve on back Cover Bolts side of grill. Set aside for later use. Step 11 Using an adjustable wrench to hold the gas line secure, use the open end wrench provided to loosen the gas line retaining nut. Wi

Resumen del contenido incluido en la página 18

CONVERSION Gas Manifold Nut INSTRUCTIONS 810-8530-S & 810-8532-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. Note: Make sure all control knobs are in the off position, LP tank valve is clos

Resumen del contenido incluido en la página 19

Step 4 Remove screw from each burner "foot" using a screwdriver. Carefully lift each burner up and away from valve openings. Set aside for later use. Side View Step 5 Use the gas orifice tool to remove the LP brass orifice from main burner valves through the hole on the firebox front panel. Repeat this step for all Firebox Front Panel main and side burner valves in your grill.The side burner valve orifice is under the side shelf. Note: All orifices of the grill, except LP Gas Orifice rotisserie,

Resumen del contenido incluido en la página 20

Step 7 Figure 1 shows valve stem and bezel with the control knob removed. Take five large stop plates from the Stop Plate component card and place them over Tab the main and side burner valve stems as illustrated (Figure 2). Take the small stop plate from the component card and place it over the rotisserie burner Stop Pin valve stem (Figure 3). Verify the tab and the stamped letter on the stop plates face out. Replace control knobs Figure 1 Figure 2 when finished. Stop Plate Tab WARNING: We reco


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Brinkmann 7231 Series Manual de instrucciones Barbacoa de carbón 3
2 Brinkmann 810-8552-S Manual de instrucciones Barbacoa de carbón 2
3 Brinkmann 810-8530-S Manual de instrucciones Barbacoa de carbón 4
4 Brinkmann 810-8550-S Manual de instrucciones Barbacoa de carbón 4
5 Brinkmann 7741 Series Manual de instrucciones Barbacoa de carbón 0
6 Brinkmann 810-8640-S Manual de instrucciones Barbacoa de carbón 1
7 Brinkmann 810-3810-S Manual de instrucciones Barbacoa de carbón 2
8 Brinkmann 3300 Manual de instrucciones Barbacoa de carbón 1
9 Brinkmann CHARCOAL SMOKER Manual de instrucciones Barbacoa de carbón 4
10 Brinkmann 810-8905-S Manual de instrucciones Barbacoa de carbón 21
11 Brinkmann Dual Zone Manual de instrucciones Barbacoa de carbón 2
12 Brinkmann Grill King DeLuxe Heavy-Duty Outdoor& Smoker Manual de instrucciones Barbacoa de carbón 2
13 Brinkmann Manual de instrucciones Barbacoa de carbón 2
14 Brinkmann Heavy-Duty Manual de instrucciones Barbacoa de carbón 2
15 Brinkmann Kettle Grill Manual de instrucciones Barbacoa de carbón 0
16 Philips 25/28PT4103 Manual de instrucciones Barbacoa de carbón 0
17 Aiphone AX-DVF-P Manual de instrucciones Barbacoa de carbón 2
18 American Range F4 Manual de instrucciones Barbacoa de carbón 2
19 Apollo NAPOLEON N415-0084 Manual de instrucciones Barbacoa de carbón 3
20 Aussie 4201 Manual de instrucciones Barbacoa de carbón 5