Brinkmann 810-8750-S user manual

User manual for the device Brinkmann 810-8750-S

Device: Brinkmann 810-8750-S
Category: Charcoal Grill
Manufacturer: Brinkmann
Size: 15.37 MB
Added : 7/8/2013
Number of pages: 88
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Brinkmann 810-8750-S. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Brinkmann 810-8750-S.

For your convenience

If looking through the Brinkmann 810-8750-S user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Brinkmann 810-8750-S on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Brinkmann 810-8750-S to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Brinkmann 810-8750-S User manual - Online PDF
Advertisement
« Page 1 of 88 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Brinkmann 810-8750-S but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Brinkmann 810-8750-S. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

NOTICE TO
PROFESSIONAL INSTALLER:
LEAVE THESE INSTRUCTIONS WITH
THE GRILL OWNER FOR FUTURE
REFERENCE.
AVISO PARA EL
INSTALADOR:
ENTREGUE ESTAS
INSTRUCCIONES AL PROPIETARIO
DE LA PARRILLA PARA
REFERENCIA FUTURA.
Universal Natural Gas Conversion Kit
Equipo Universal de Conversión a
Gas Natural
PROFESSIONAL INSTALLATION MANUAL
MANUAL DE INSTALACIÓN PROFESIONAL
CONVERTS THE FOLLOWING CHARMGLOW GRILLS FROM PROPANE TO
NATURAL GAS: MODEL NUMBERS 810-7405-S, 810-8500-S, 810-8530-S,
810-8532-S, 810-855

Summary of the content on the page No. 2

IMPORTANT SAFETY WARNINGS WE WANT YOU TO USE YOUR CONVERSION KIT FOR YOUR GRILL AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT THE ATTENTION TO POSSIBLE HAZARDS AS THE GRILL IS CONVERTED AND USED AS A NATURAL GAS GRILL. WHEN YOU SEE THE SAFETY ALERT SYMBOL PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE CONVERTING AND OPERATING YOUR GRILL. DANGER IF YOU SMELL GAS: 1. Shut off gas to the appliance. 2.

Summary of the content on the page No. 3

TABLE OF CONTENTS General Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 Conversion Instructions 810-8905-S, 810-8907-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Conversion Instructions 810-8750-S, 810-8752-S . . . . . . . . . .

Summary of the content on the page No. 4

DANGER Connection should be made by a professional service technician. Supply the technician with a copy of these instructions. Incorrect connection can result in a gas leak with possibility of fire. GENERAL WARNINGS WARNING • Never use liquid propane gas in a unit designed for natural gas. • Never use charcoal or wood briquette in a gas grill. Flavoring chips must be contained in a metal smoking box to contain ash and prevent fires. • Leak test all connections before first use, even if grill wa

Summary of the content on the page No. 5

ASSEMBLY INSTRUCTIONS YOU MUST BE A PROFESSIONAL SERVICE TECHNICIAN TO CONVERT THIS GRILL. READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING THE CONVERTED GRILL. The following tools are required to assemble the Conversion Kit: • Phillips Head Screwdriver • Adjustable Wrench • 3/4”Wrench PARTS CONTENTS Gas Orifice Tool Large Wrench L 8905/8907 Rotisserie Burner 1.51mm Valve Orifice x 1 Pc (BLUE) Small Wrench Large Stop Plate x 6 Pcs. 8750/

Summary of the content on the page No. 6

CONVERSION Gas Manifold Back Panel Exit Connection INSTRUCTIONS 810-8905-S & 810-8907-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. Note: Make sure all control knobs are in the off position,

Summary of the content on the page No. 7

Step 4 Remove two screws from each Wood Chip Drawer burner "foot" using a screwdriver. Remove wood chip drawer to get access to the wood chip burner. Remove one screw from the wood chip burner. Carefully lift each burner up and away from valve openings. Set aside for later use. Side View Step 5 Using the gas orifice tool, remove the LP brass orifice from the tip of Fire Box Front Panel each gas valve assembly. Repeat this step for all main burner and wood chip burner valves in your grill. Note:

Summary of the content on the page No. 8

810-8905-S & 810-8907-S SIDE BURNERS CAUTION: Only use specified natural gas orifice for your grill. Step 8 Small Wrench Brass Cap Remove the side burner brass cap by using the small wrench to unscrew the two small screws. Step 9 Remove access panel on left side of grill for better view of gas orifice. Step 10 Use the gas orifice tool to remove LP brass orifice from the hole on the top of side burner. Step 11 Using gas orifice tool, install 1.25mm (GREEN) natural gas orifice. Be careful not to

Summary of the content on the page No. 9

810-8905-S & 810-8907-S ROTISSERIE BURNERS Cover Bolts CAUTION: Only use specified natural gas orifice for your grill. Note: It is helpful to keep the screws with the components as they are removed for ease of reassembly. Step 13 Remove rotisserie cover bolts and remove rotisserie cover to gain access to the rotisserie LP gas orifice on back side of grill. Step 14 Using an adjustable wrench to hold the gas line secure, use the open end wrench provided to loosen the gas line retaining nut. With

Summary of the content on the page No. 10

CONVERSION Right INSTRUCTIONS Accessory Drawer 810-8750-S & 810-8752-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. Gas Manifold Connection Note: Make sure all control knobs are in the off po

Summary of the content on the page No. 11

Main Burner Note: Step 4 only applies to model 810-8750-S. Step 4 Remove screw from each burner "foot" using a screwdriver. Carefully lift each burner up and away from Sear Burner valve openings. Set aside for later use. 10

Summary of the content on the page No. 12

CAUTION: Some parts may Side View contain sharp edges. Wear protective gloves if necessary. Fire Box Front Panel Step 5 Using the one of the gas orifice tool provided remove the LP brass orifice from the tip of each gas valve assembly. Wrench Note: All orifices of the grill, except rotisserie, are double orifices LP Gas Orifice type (LP gas and natural gas). You only remove the LP gas orifice tip. Step 6 Remove all the control knobs from the control panel and set aside for later use. Step 7 Figu

Summary of the content on the page No. 13

810-8750-S & 810-8752-S SIDE BURNERS CAUTION: Only use specified natural gas orifice for your grill. Small Wrench Step 8 Brass Cap Remove the left side shelf by unscrewing the four bolts. Step 9 Remove the side burner brass cap by using the small wrench to unscrew the two small screws. Step 10 Remove access panel on left side of grill for better view of gas orifice. Step 11 Use the gas orifice tool to remove LP brass orifice from the hole on the top of side burner. Step 12 Using gas orifice tool

Summary of the content on the page No. 14

CONVERSION INSTRUCTIONS 810-8550-S, 810-8552-S & 810-8555-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage Gas Manifold Nut and void your grill warranty. Note: Make sure all control knobs are in the off position, LP tank v

Summary of the content on the page No. 15

Step 4 Remove screw from each burner "foot" using a screwdriver. Carefully lift each burner up and away from valve openings. Set aside for later use. Side View Step 5 Use the gas orifice tool to remove the LP brass orifice from main burner Firebox Front Panel valves through the hole on the firebox front panel. Repeat this step for all main, side and rotisserie burner valves in your grill.The side burner valve orifice is under the side shelf. LP Gas Orifice Note: All orifices of the grill, except

Summary of the content on the page No. 16

Step 7 Figure 1 shows valve stem and bezel with the control knob removed. Take five large stop plates from the component card and place them over Stop Plate the main and side burner valve stems Tab as illustrated (Figure 2). Take the small stop plate from the component card and place it over the rotisserie burner Stop Pin valve stem (Figure 3). Verify the tab and the stamped letter on the stop plates face out. Replace control knobs Figure 2 Figure 1 when finished. WARNING: We recommend and Stop

Summary of the content on the page No. 17

810-8550-S, 810-8552-S & 810-8555-S ROTISSERIE BURNERS CAUTION: Only use specified natural gas orifice for your grill. Note: It is helpful to keep the screws with the components as they are removed for ease of reassembly. Step 10 Remove the two screws of panel to gain access to the rotisserie LP valve on back Cover Bolts side of grill. Set aside for later use. Step 11 Using an adjustable wrench to hold the gas line secure, use the open end wrench provided to loosen the gas line retaining nut. Wi

Summary of the content on the page No. 18

CONVERSION Gas Manifold Nut INSTRUCTIONS 810-8530-S & 810-8532-S CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. Note: Make sure all control knobs are in the off position, LP tank valve is clos

Summary of the content on the page No. 19

Step 4 Remove screw from each burner "foot" using a screwdriver. Carefully lift each burner up and away from valve openings. Set aside for later use. Side View Step 5 Use the gas orifice tool to remove the LP brass orifice from main burner valves through the hole on the firebox front panel. Repeat this step for all Firebox Front Panel main and side burner valves in your grill.The side burner valve orifice is under the side shelf. Note: All orifices of the grill, except LP Gas Orifice rotisserie,

Summary of the content on the page No. 20

Step 7 Figure 1 shows valve stem and bezel with the control knob removed. Take five large stop plates from the Stop Plate component card and place them over Tab the main and side burner valve stems as illustrated (Figure 2). Take the small stop plate from the component card and place it over the rotisserie burner Stop Pin valve stem (Figure 3). Verify the tab and the stamped letter on the stop plates face out. Replace control knobs Figure 1 Figure 2 when finished. Stop Plate Tab WARNING: We reco


Alternative user manuals
# User manual Category Download
1 Brinkmann 7231 Series User manual Charcoal Grill 3
2 Brinkmann 810-8552-S User manual Charcoal Grill 2
3 Brinkmann 810-8530-S User manual Charcoal Grill 4
4 Brinkmann 810-8550-S User manual Charcoal Grill 4
5 Brinkmann 7741 Series User manual Charcoal Grill 0
6 Brinkmann 810-8640-S User manual Charcoal Grill 1
7 Brinkmann 810-3810-S User manual Charcoal Grill 2
8 Brinkmann 3300 User manual Charcoal Grill 1
9 Brinkmann CHARCOAL SMOKER User manual Charcoal Grill 4
10 Brinkmann 810-8905-S User manual Charcoal Grill 21
11 Brinkmann Dual Zone User manual Charcoal Grill 2
12 Brinkmann Grill King DeLuxe Heavy-Duty Outdoor& Smoker User manual Charcoal Grill 2
13 Brinkmann User manual Charcoal Grill 2
14 Brinkmann Heavy-Duty User manual Charcoal Grill 2
15 Brinkmann Kettle Grill User manual Charcoal Grill 0
16 Philips 25/28PT4103 User manual Charcoal Grill 0
17 Aiphone AX-DVF-P User manual Charcoal Grill 2
18 American Range F4 User manual Charcoal Grill 2
19 Apollo NAPOLEON N415-0084 User manual Charcoal Grill 3
20 Aussie 4201 User manual Charcoal Grill 5