Resumen del contenido incluido en la página 1
GETTING READY
SEWING BASICS
UTILITY STITCHES
APPENDIX
Operation Manual
Computerized Sewing Machine
Product Code: 885-V12/V13
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS Please read these safety instructions before attempting to use the machine. DANGER - To reduce the risk of electric shock: 1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any user servicing adjustments mentioned in this manual, or if you are leaving the machine unattended. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons. 2 Always unplug the machine from the electrical out
Resumen del contenido incluido en la página 4
4 Always keep your work area clear: � Never operate the machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the build up of lint, dust, and loose cloth. � Do not store objects on the foot controller. � Do not use extension cords. Plug the machine directly into the electrical outlet. � Never drop or insert any object into any opening. � Do not operate where aerosol (spray) products are being used or where oxygen is being administere
Resumen del contenido incluido en la página 5
8 For repair or adjustment: � If the Light unit (light-emitting diode) is damaged, it must be replaced by authorized dealer. � In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in this manual. Use accessories recommended by the manufa
Resumen del contenido incluido en la página 6
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY IMPORTANT � In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug. � Always replace the fuse cover. Never use plugs with the fuse cover omitted. � If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your authorized dealer to obtain the correct lead. 4
Resumen del contenido incluido en la página 7
5
Resumen del contenido incluido en la página 8
—————————————————————————————————————————————————————————— Contents IMPORTANT SAFETY INSTRUCTIONS ...............................................................................1 Introduction ........................................................................................................................8 Names of Machine Parts and Their Functions .....................................................................8 Machine ...............................................................
Resumen del contenido incluido en la página 9
Useful Sewing Tips ............................................................................................................50 Trial sewing .................................................................................................................................................... 50 Changing the sewing direction ....................................................................................................................... 50 Sewing curves ......................................
Resumen del contenido incluido en la página 10
Introduction Thank you for choosing this product. Before using this sewing machine, carefully read “Important Safety Instructions”, and then study this manual for the correct operation of the various functions. In addition, after you have finished reading this manual, store it where it can quickly be accessed for future reference. Names of Machine Parts and Their Functions Machine a Bobbin winder (page 15) k Handwheel Use the bobbin winder when winding the bobbin. Turn the handwheel toward you t
Resumen del contenido incluido en la página 11
Needle and presser foot section a Needle threader lever Use the needle threader to thread the needle. b Buttonhole lever Lower the buttonhole lever when sewing buttonholes and bar tacks. c Presser foot holder The presser foot is attached to the presser foot holder. d Presser foot holder screw Use the presser foot holder screw to hold the presser foot holder in place. e Presser foot The presser foot applies pressure to the fabric during sewing. Attach the appropriate presser foot for the sele
Resumen del contenido incluido en la página 12
Operation buttons The operation buttons help you to easily perform various basic sewing machine operations. are sewn by sewing 3 to 5 stitches on top of each other. a Start/stop button For details, refer to“Securing the stitching” (page 46). Press the start/stop button to start or stop sewing. The machine sews at a low speed at the beginning of sewing c Needle position button while the button is continuously pressed. When sewing Press the needle position button to raise or lower the is stop
Resumen del contenido incluido en la página 13
Accessories After opening the box, check that the following accessories are included. If any item is missing or damaged, contact your dealer. Included accessories The following items should also be included in the box. Note (For U.S.A. only) ● Foot controller: Model T This foot controller can be used on this machine model NS40. ● The screw for the presser foot holder is available through your authorized dealer. (Part code: XA4813-051) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.* 11. 12. 13. 14. 15. 16. 1
Resumen del contenido incluido en la página 14
■ Attaching the stitch pattern plate (for models equipped with the stitch pattern plate) The stitch pattern plate shows the stitches and the stitch numbers. A letter (A, G, J, N or R) indicating the presser foot that should be used appears below the stitch number. Attach the stitch pattern plate to the stitch pattern plate holder, and then attach the holder to the handle of the sewing machine as shown in the illustration below. Optional accessories The following are available as optional acce
Resumen del contenido incluido en la página 15
1 GETTING READY 1 Turning the Machine On/Off This section explains how to turn the sewing machine on and off. Power supply precautions Be sure to observe the following precautions concerning the power supply. WARNING ● Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine. ● Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power supply jack on the machi
Resumen del contenido incluido en la página 16
GETTING READY— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Turning on the machine Turning off the machine Prepare the included power cord. When you are finished using the sewing machine, turn it off. In addition, before transporting the sewing Make sure that the sewing machine is turned machine to another location, be sure to turn it of
Resumen del contenido incluido en la página 17
Preparing for Upper and Lower Threading Winding the bobbin 1 Wind the thread onto the bobbin. a Hook of the bobbin-winding thread guide b Pretention disk c Bobbin winder shaft d Bobbin CAUTION ● Only use the bobbin (part code: SA156, SFB(XA5539-151)) designed specifically for this sewing machine. Use of any other bobbin may result in injuries or damage to the machine. ● The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine
Resumen del contenido incluido en la página 18
GETTING READY— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Slide the spool cap onto the spool pin. While holding the spool with your right hand, f g With the slightly rounded side of the spool cap pull the thread with your left hand, and then positioned toward the left, slide the spool cap pass the thread under the thread guide. onto th
Resumen del contenido incluido en la página 19
While using your left hand to hold the thread Press (start/stop button) once. j m that was passed through the bobbin-winding When the foot controller is plugged in, press thread guide, use your right hand to wind the down on the foot controller. end of the thread clockwise around the The bobbin starts spinning and the bobbin five or six times. thread is wound around the bobbin. 1 Pass the end of the thread through the slit in k the bobbin winder seat, and then pull the thread to the right
Resumen del contenido incluido en la página 20
GETTING READY— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Turn off the sewing machine (set it to “ ”). b Installing the bobbin Install the bobbin wound with thread. CAUTION ● Use a bobbin that has been correctly wound, otherwise the needle may break or the thread tension will be incorrect. Slide the latch on the right side of the bobbi
