Manual de instrucciones de American Standard R520

Resumen del contenido incluido en la página 1

Installation
Instructions
R520
CENTRAL THERMOSTAT
WITH VOLUME CONTROL
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
Certified to comply with ANSI A112.18.1M
To ensure that your installation proceeds smoothly--please
ASSE 1016
read these instructions carefully before you begin.
M968255Rev.1.1
ROUGHING-IN DIMENSIONS
CONNECTIONS ARE: 1/2" NPT
6-1/4
1/2" NPT
SHOWER
3-15/16
7
3-5/8
1/2" NPT
INLET
1/2" NPT
1/2" NPT
INLET
TUB 1-5/8 - 2-1/2
5-7/8
THERMOSTA

Resumen del contenido incluido en la página 2

DO NOT SOLDER DIRECTLY TO THE VALVE BODY; THIS WILL DAMAGE WARNING ROUGHING-IN THE VALVE THE TEMPERATURE CONTROL ELEMENT AND CHECK STOP VALVES. 1 MIXED COLD Prepare water supplies per ROUGHING-IN DIMENSIONS. Make sure the finished wall is between the minimum and maximum rough dimension. Install VALVE at indicated height and depth. Make sure the "TOP" marking on the PLASTER GUARD is up. Connect the hot and cold water supplies. Assemble all connecting pipes. Flush lines to HOT remove any dirt. Conn

Resumen del contenido incluido en la página 3

CENTRAL THERMOSTAT WITH VOLUME CONTROL MODEL NUMBER R520 953950-0070A CHECK STOP (COLD BLUE) 994053-0070A CARTRIDGE A918572-0070A CARTRIDGE SCREW 923348-0070A HANDLE ADAPTER 953963-0070A 953960-0070A HANDLE EXTENSION THERMOSTAT CARTRIDGE 953951-0070A 912647-0070A CHECK STOP (HOT RED) 953957-0070A O-RING TEMPERATURE CALIBRATION UNIT 963434-YYY0A DEEP ROUGH KIT (SOLD SEPARATELY) HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1-800 442-1902 Weekdays 8:00 a.m. to 8