Manual de instrucciones de Ingersoll-Rand ARO 650543-X

Resumen del contenido incluido en la página 1

OPERATOR’S MANUAL 650542-X
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.
650543-X
INCLUDE MANUALS: 6712X-X Pump (pn 97999-602), 651615-X-D Single Post Lift / Ram (pn
RELEASED: 3-6-95
97999-1025) & S-636 General Information (pn 97999-636).
REVISED: 3-17-08
(REV. H)
650542-X 650543-1
4-1/4” AIR MOTOR
Carbon Steel Stainless Steel
43.6:1 RATIO
Pump System
4” STROKE
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employ

Resumen del contenido incluido en la página 2

INSTALLATION The 65054X-X Extrusion System comes completely assem- materials can be pumped directly from their original 5 gallon bled. Remove the unit from the crate and place on a level / 25 liter drum without air inclusion or excessive waste. The surface. Install the material hose and dispensing device as follower plate creates an air tight seal as well as clean-wiping required. action in its progressive downward movement into the drum. When the following instructions are observed, heavy pa

Resumen del contenido incluido en la página 3

PARTS LIST / 65054X-X Air Inlet Drum Stop 20” (508.0 mm) Items included in 651615-D single post ram assembly. 27-9/16” (699.6 mm) 59756-362 Male Elbow (2) (1/2” o.d. tube x 1/2 - 14 N.P.T.) (1/2” o.d. x 24” long) 94978-( ) Tubing 91790 Muffl er Follower Plate Air Supply Valve Y6-66-C Screw (4) (3/8” - 16 x 1-1/4”) Y13-6-C Washer (4) 43-5/8” (3/8”) (1107.5 mm) Material Outlet (1/2 - 14 N.P.T.F. - 1, female) Vent Plug Thumb Screw Figure 3 650542-X (en) Page 3 of 4

Resumen del contenido incluido en la página 4

PN 97999-609 Page 4 of 4 650542-X (en)