Manual de instrucciones de Dakota Digital 650360

Resumen del contenido incluido en la página 1

Operating Manual for
Clock / Auxiliary Displays for VHX systems

The VHX auxiliary display module is designed to work with a Dakota Digital VHX system and will not function properly
on its own. With this module, an additional display area is added to your current system to provide more functionality.
This module can be used as a simple clock display or it can display data from any BIM module attached to the system
as well as several gauge values from the control box sensors.

Mos

Resumen del contenido incluido en la página 2

SETUP: To enter setup, press and hold the switch (for systems with 3 switches, hold the center switch) while turning on the key. The display will read “SETUP”. Release the switch and the setup menu will be entered. Below is an outline of the setup options. Following the outline are more detailed instructions for each option. Press and release the switch to move through the various setup options or to change a setting. Press and hold the switch to select a setup option or to save a changed

Resumen del contenido incluido en la página 3

TEMP UNIT: This setting determines which temperature unit is used when displaying temperatures. This unit setting will be independent of the units used in the main VHX system and may be used to provide and alternate display unit from the main VHX screens if so desired. Default setting is Fahrenheit. Enter setup. Press and release switch until “TEMP UNIT” is displayed, then press and hold switch. Press and release switch to toggle between F (Fahrenheit) and C (Celsius) Press and hold s

Resumen del contenido incluido en la página 4

AVAILABLE SCREENS: Some screen data should always be available to this module from most VHX systems. These screens are: Clock Engine Temp Oil Pressure Fuel Level Tachometer Speed (MPH) Speed (km/hr) Additionally, depending on the configuration of your main VHX system, many other screens may also be available (many of these readings require additional sensors and or BIM expansion modules) including: Gear Position Compass Various temperature readings Various pressure readings

Resumen del contenido incluido en la página 5

USING CLOCK OFFSET: Because this auxiliary module displays the clock, it may be desired to disable the display of the clock on the main VHX screens. This makes it much more difficult to adjust the VHX clock because the main VHX system requires the clock screen to be displayed to set it. To make clock adjustment more convenient in this situation, a clock offset may be set on this module. The steps are the same as setting the main VHX clock but it is done using the switch for this auxiliar

Resumen del contenido incluido en la página 6

SERVICE AND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems. Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authoriza