Resumen del contenido incluido en la página 1
Wireless Weather
Projection Clock
with Light Detector
USER MANUAL
(PCR325W)
1 1
Resumen del contenido incluido en la página 2
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Wireless MAIN UNIT Weather Projection Clock with Light Detector. FEATURES This device includes precise time keeping, • Light Sensor detects low light conditions and lights up the weather forecast, alarm, and temperature monitoring LCD display features that you can use from the comfort of • Multi-channel capability to monitor temperature in up to three remote locations (additional sensors required) your home. • Outdoor te
Resumen del contenido incluido en la página 3
AUTO ON OFF CONTINUE PROJECTION LIGHT SENSOR A LCD DISPLAY Allows easy reading of indoor/ outdoor temperature, weather conditions, and calendar and time. E / I B CHANNEL SELECTOR LIGHT SNOOZE O Selects different remote sensor readings. LIGHT SENSOR C ALARM ON/OFF BUTTON * Switches between the calendar display and three different ATO M I C C LO C K alarm modes. * Sets the weekday alarm, single alarm or pre-alarm. CH MIN MAX A IN D MODE BUTTON M D AM Z PM Z * Toggles between
Resumen del contenido incluido en la página 4
N [LIGHT SENSOR] SWITCH A LED INDICATOR When AC adapter is connected, position the light sensor Flashes once when the remote sensor transmits a reading to switch to: the main unit. * “AUTO” to activate an auto backlight. Flashes twice when battery power is low. * “ON” to set continuous LCD backlight. * “OFF” to deactivate LCD backlight. B BATTERY COMPARTMENT The built-in light sensor detects the environmental light Holds two AA batteries. conditions. If the light conditi
Resumen del contenido incluido en la página 5
3. Position the remote sensor so that is faces the main unit If no signals are received from the remote sensor(s) within (receiver), minimizing obstructions such as doors, walls, 2 minutes, dashes “ ” will be displayed. and furniture. Press and hold DOWN button [ – ] for 2 seconds to activate 4. Though the remote sensors are weather-resistant, they another signal search. should be placed away from direct sunlight, rain or snow. CHECKING REMOTE AND INDOOR TEMPERATURES The indoor tem
Resumen del contenido incluido en la página 6
CURRENT TIME AND INDOOR/OUTDOOR READING THE KINETIC WAVE DISPLAY TEMPERATURE PROJECTION The kinetic wave display shows the main unit (receiver) signal reception strength. PM Searching for signal Temperature signals successfully received. 1. Press "FLIP" to rotate projection image 180° clockwise. ˚F No signal. WWVB RADIO CONTROLLED TIME The NIST (National Institute of Standards and Technology) radio station is located in Ft. Collins Colorado. It transmits an exact time signal continuously throug
Resumen del contenido incluido en la página 7
* Within concrete wall rooms such as basements or office INDOOR ANR OUTDOOR TEMPERATURES buildings, the received signal may be weakened. The trend indicator shows the trend of temperatures collected Always place the unit near the window. at a particular remote sight. There are three trends will be shown: rising, steady, and falling. WEATHER FORECAST TREND TREND TREND The weather projection clock is capable to detect an Arrow atmospheric pressure changes. Based on collected data, indicator i
Resumen del contenido incluido en la página 8
If everything listed above in order and there is no reception CALENDAR AND CLOCK DISPLAY MODES anyway, please perform the following steps: The date is displayed in month-date format. Each press of the 1. Bring main unit and remote sensor close together. MODE button will change the clock display setting between 2. Remove 4 small screws from the back of the remote sensor the time with the seconds, and the time with the day of week. and open the battery compartment. 3. Remove the batteries fr
Resumen del contenido incluido en la página 9
“ ” (Weekday alarm), “ ” (Single day alarm), and PRECAUTIONS W S “Pre-AL” (Pre-alarm) icons will indicate which alarm mode This product is engineered to give you years of satisfactory is armed. You can enable or disable an alarm by pressing the service if handled carefully. Here are a few precautions: [ + ],[ – ] buttons in alarm display mode. Press MODE to 1. Do not immerse the units in water. toggle between alarm modes or to return to the default display. 2. Do not clean the unit
Resumen del contenido incluido en la página 10
SPECIFICATIONS Dimensions Temperature Measurement Main unit : 3.25(L) x 4.5(H) x 1.25(D) inches Main unit Remote sensor : 2(L) x 4(H) x 1 (D) inch Indoor Temperature Proposed operating range : -5°C to +50°C / FCC STATEMENT 23°F to 122°F This device complies with Part 15 of the FCC Rules. Temperature resolution : 0.1°C/ 0.2°F Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and Remote Sensor (2) This device must accept any
Resumen del contenido incluido en la página 11
DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION This product is warranted from the manufacturing defects for We one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, Name: Hideki Electronics, Inc. commercial use, or unauthorized adjustment and repair. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 Note that online product registration is required to ensure valid warranty protection. declare that the pro
