Resumen del contenido incluido en la página 1
Atomic Clock
with Wireless
Indoor/Outdoor
Thermometer
USER MANUAL
(TE211W)
1 1
Resumen del contenido incluido en la página 2
INTRODUCTION PRODUCT OVERVIEW MAIN UNIT Thank you for selecting the Honeywell Atomic Clock with Indoor/Outdoor Thermometer. FEATURES This device includes precise time keeping and • Wireless sensor transmits temperature to the main unit temperature monitoring features that you can use from up to 100 feet away • Multi-channel capability to monitor temperature in up to from the comfort of your home. 3 remote locations In this package you will find: • Indoor and Outdoor temperature display •
Resumen del contenido incluido en la página 3
A PRECISE TIME WITH TEMPERATURE IN THREE-LINE LCD DISPLAY View of indoor/outdoor temperature and precise time. B ALARM BUTTON Sets an alarm and allows displaying alarm status. H C CHANNEL BUTTON Recalls the different remote sensor reading. D MEMORY BUTTON CH 1). Recalls maximum or minimum temperature. 2). Clears the memory. PM A E MODE BUTTON Changes display modes and confirms settings. M D F UP ( ) BUTTON 1). Increases the setting. 2). Enables atomic clock recept
Resumen del contenido incluido en la página 4
F °C/ °F SWITCH REMOTE SENSOR Selects the temperature display unit in Celsius or Fahrenheit. FEATURES • Remote temperature transmission to the main unit via BEFORE YOU BEGIN 433 MHz signal 1. We recommend using alkaline batteries for the main unit • Case can be wall mounted using built-in hanger and remote sensor. • 100 feet transmission range without interference 2. Avoid using rechargeable batteries. • Temperature display selection in Fahrenheit or Celsius 3. Insert batteries bef
Resumen del contenido incluido en la página 5
4. Install two “AA” size alkaline batteries (not included) The unit is in searching mode. matching to the polarities shown in the battery compartment. 5. Replace the battery compartment door and secure the screws. 6. Secure the remote sensor in the desired location. Temperature readings are securely registered. BATTERY INSTALLATION: MAIN UNIT ˚F No signals. 1. Open the battery compartment door. 2. Install two batteries (UM-3 or “AA” size 1.5V) matching the polarity as shown in the ba
Resumen del contenido incluido en la página 6
MAXIMUM AND MINIMUM TEMPERATURE If everything listed above is in order and there is no reception The maximum and minimum record of the indoor and remote anyway, please perform the following steps: 1. Bring main unit and remote sensor close together. temperature will be automatically stored in the memory of the main unit (receiver). Main unit will display the minimum, 2. Remove 4 small screws from the back of the remote sensor and open the battery compartment. maximum and the current readin
Resumen del contenido incluido en la página 7
SETTING CLOCK MANUALLY ALARMS TIME ZONE * Weekday Alarm 1. Press MODE to select the time display with weekday. The alarm will sound and the alarm icon will flash at the 2. Select the time zone by pressing and holding the “ ” set time Mondays through Fridays. button for 3 seconds. 3. Keep holding until the desired time zone (Pacific, * Single Day Alarm Mountain, Central or Eastern) is selected on the display map. The alarm will sound and the alarm icon will flash at the set
Resumen del contenido incluido en la página 8
SPECIFICATIONS FCC STATEMENT Temperature Measurement This device complies with Part 15 of the FCC Rules. Main unit Operation is subject to the following two conditions: Indoor Temperature (1) This device may not cause harmful interference, and Proposed operating range : -5.0°C to +50.0°C / (2) This device must accept any interference received, 23.0°F to 158.0°F including interference that may cause undesired operation. Temperature resolution : 0.1°C/ 0.2°F Warning: Changes or m
Resumen del contenido incluido en la página 9
DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION This product is warranted from the manufacturing defects for We one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, Name: Hideki Electronics, Inc. commercial use, or unauthorized adjustment and repair. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 Note that online product registration is required to ensure valid warranty protection. declare that the pro
