Resumen del contenido incluido en la página 4
RULES FOR SAFE OPERATION (Continued) • NEVER USE IN AN EXPLOSIVE ATMOSPHERE. DO NOT PLACE BATTERY TOOLS OR THEIR Normal sparking of the motor could ignite flam- BATTERIES NEAR FIRE OR HEAT. They may mable liquids, gases, or fumes. explode. • KEEP HANDLES DRY, CLEAN, AND FREE • DO NOT CHARGE BATTERY TOOL IN A DAMP FROM OIL AND GREASE. Always use a clean OR WET LOCATION. cloth when cleaning. Never use brake fluids, • Your battery tool should be charged in a location gasoline, petroleum-based produ
Resumen del contenido incluido en la página 5
RULES FOR SAFE OPERATION (Continued) M An extension cord should not be used unless B Do not use charger outdoors. absolutely necessary. Use of improper extension B Disconnect charger from power supply when not in :+'. cord could result in a risk of fire and electric shock. use. If extension cord must be used, make sure: M SAVE THESE INSTRUCTIONS. Refer to them a. That pins on plug of extension cord are the frequently and use them to instruct others who may same number, size and shape as those of
Resumen del contenido incluido en la página 6
Thefollowing recommended accessories arecurrently available at SearsRetailStores. • High Speed Bits (For Wood or Metal)...3/4 in. Max. • 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power ScrewdriveriNutddver Set and Case • Keyless Chuck (Item No. 9-20988) • 17-Pc. Power Screwdriver/Nutdriver Set and Case WARNING: The use of attachments or accessories not listed might be hazardous. KNOW YOUR DRILL-DRIVER WRIST STRAP See Figure I. See Figure 1. Before attempting to use any tool, familiarize
Resumen del contenido incluido en la página 7
:. ,:;.: SWITCH _, WARNING: Always wear safety goggles or safety glasses with side shields when operating See Figure2. tools. Failure to do so could result in objects Toturn yourdrillON, depressthe switchtrigger.To being thrown into your eyes, resulting in possible turnit OFF, release the switchtrigger. serious injury. SE_C_R _IL WARNING: Do not allow familiarity with your drill-driver to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. CHA
Resumen del contenido incluido en la página 8
REVERSIBLE See Figure 3. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked. SELECTOR BATTERYP/_CK t CENTERPosmoN RE
Resumen del contenido incluido en la página 9
KEYLESSCHUCK INSTALLING BITS See Figure 7. See Figure 5. Lock switch trigger on your drill by placing the Your new drill has a keyless chuck. As the name implies, • direction of rotation selector in center position. you can hand tighten or release drill bits inthe chuck See Figure 2. jaws. Grasp and holdthe collar of the chuck with one hand. Rotate the chuck body with your other hand. The • Open or close chuck jaws to a point where the arrows on the chuck indicate which directionto rotate openin
Resumen del contenido incluido en la página 10
REMOVINGBITS A WARNING: Always wear safety goggles or safety glasses with side shields when operating See Figure 7. tools. Failure to do so could result in objects • Lock switch trigger on your drill by placing the being thrown into your eyes, resulting in possible direction of rotation selector in center position. sedous injury. See Figure 2. • Loosen the chuck jaws from driUbit. LEVEL DRILLING • To loosen: grasp and hold the collar of the chuck See Figure 10. with one hand, while rotating chuc
Resumen del contenido incluido en la página 11
DRILLING OVERLOAD See Figure 11. Your drill has a built-in overload protsctor to protect the motor during overloading or prolonged use. The overloed protector automatically activates to break the circuit. When this occurs, allow your drill to cool a few seconds before resuming operation. CHUCK REMOVAL See Figures 12, 13, and 14. The chuck must be removed in order to use some accessories. To remove: • Lock switch trigger on your drill by placing the direction of rotation selector in center positi
Resumen del contenido incluido en la página 12
CHUCKREMOVAL(Continued) ,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a part may create a hazard or cause product counterclockwise direction. This will loosen chuck damage. on the spindle. It can now be unscrewed by hand. Avoid using solvents when cleaning plastic parts. See Figure 14. Most plastics are susceptible to damage from various types of commemial s
Resumen del contenido incluido en la página 13
BA'R'ERY PACK REMOVAL AND To preserve natural resources, please recycle or dispose of batteries PREPARATION FOR RECYCLING property. This product contains nickel- _ WARNING: Upon removal, cover the battery cadmium batteries. Local, state or pack's terminals with heavy duty adhesive tape. federal laws may prohibit disposal of Do not attempt to destroy or disassemble battery nickel-cadmium batteries in ordinary pack or remove any of its components. Nickel- trash. cadmium batteries must be recycled
Resumen del contenido incluido en la página 14
14
Resumen del contenido incluido en la página 15
CRAFTSMAN3/8 In. 13.2VOLTSCORDLESSDRILL-DRIVER - MODELNO.973.111470 Themodel number willbefoundonaplateattached tothemotor housing. Always mention themodel number inallcorrespondence regarding your3/8in.13.2VOLTSCORDLESS DRILL-DRIVER or i I whenordering repairparts. SEE BACK PAGEFORPARTSORDERINGINSTRUCTIONS 2 3 4 PARTS LIST Key Part No. Number Description Quan. 1 616478-003 Screw (Special) ................................................ 1 2 973094-001 Chuck (item No. _-20988) ..................
Resumen del contenido incluido en la página 16
For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E sM Anytime, day or night (1-800.469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 4 1-800-488-1222 Anytime, day or night www.sears.com For the replacement parts, accessories and owner's manuals that you need to do-it-yourself, call Sears PartsDirect sM ! 1-8
Resumen del contenido incluido en la página 1
Owner's Manual
Variable Speed / Reversible
318 in. 13.2 VOLTS CORDLESS DRILL-DRIVER
Model No.
973.111470
Save this manual for
future reference
CAUTION: Read and follow all
• Safety
Safety Rules and Operating In-
• Features
structions before first use of this
• Operation
product.
• Maintenance
• Parts List
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
®
972000-789
8-0O
Resumen del contenido incluido en la página 2
• Warranty ......................................................................................................................................................... 2 • Introduction and Product Specifications ......................................................................................................... 2 • Rules For Safe Operation ........................................................................................................................... 3-5 A. Important Safety Rules Fo
Resumen del contenido incluido en la página 3
Thepurposeof safetysymbolsis to attractyourattentionto possibledangers.Thesafetysymbols,and theexplanationswiththem,deserveyourcarefulattentionandunderstanding. Thesafetywarningsdo notbythemselveseliminateanydanger.TheInstructionsorwarningstheygivearenotsubstitutesfor properaccidentpreventionmeasures. SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates warning or caution. May be used in conjunction with other symbols or pictographs. WARNING: Failure to obey a safety warning can result in serious injur
