Resumen del contenido incluido en la página 1
IBM
ThinkPad CD-RW/DVD-ROM
Combo III Ultrabay 2000
Drive
User's Guide
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
IBM ThinkPad CD-RW/DVD-ROM Combo III Ultrabay 2000 Drive User's Guide
Resumen del contenido incluido en la página 4
ATTENTION Before installing this product, read the ThinkPad System Safety Booklet. Note Be sure to keep your proof of purchase, because it might be required for warranty services. See Appendix A, “Warranty Information” on page 13. First Edition (September 2002) © Copyright International Business Machines Corporation 2002. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Resumen del contenido incluido en la página 5
Contents Safety: Read first ....................v Chapter 1. About the CD-RW/DVD drive ............1 Product registration....................1 Product description....................1 Installation requirements ..................2 Installing the drive ....................2 Locating the drive controls .................3 Chapter 2. Using the CD-RW/DVD drive ............5 Before you begin.....................5 Handling and caring for a disc ................5 Caring for the CD-RW/DVD drive...........
Resumen del contenido incluido en la página 6
iv ThinkPad CD-RW/DVD-ROM Combo III Ultrabay 2000 Drive: User’s Guide
Resumen del contenido incluido en la página 7
Safety: Read first Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d’installer ce produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Pr
Resumen del contenido incluido en la página 8
Antes de instalar este produto, leia as Informações sobre Segurança. Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy. Antes de instalar este producto lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. vi ThinkPad CD-RW/DVD-ROM Combo III Ultrabay 2000 Drive: User’s Guide
Resumen del contenido incluido en la página 9
Chapter 1. About the CD-RW/DVD drive This manual provides information on registering, installing, and using the ® ® ™ IBM ThinkPad CD-RW/DVD-ROM Combo III Ultrabay 2000 Drive, and is available on the Software and User’s Guide CD in the following languages: v English v French v German v Italian v Japanese v Spanish v Brazilian Portuguese v Simplified Chinese v Traditional Chinese The appendixes of this guide contain warranty information and legal notices. Product registration Thank you for purcha
Resumen del contenido incluido en la página 10
v Carrying case v Software and User’s Guide CD v Laser Safety Guide v Quick Reference Guide Note: Your kit might also contain an update diskette for IBM DVD or CD-RW software. Contact your place of purchase if an item is missing or damaged. Be sure to retain your proof of purchase. It might be required to receive warranty service. See “Service and support” on page 13 for technical support information. Installation requirements To install the CD-RW/DVD drive, your ThinkPad computer must contain t
Resumen del contenido incluido en la página 11
Locating the drive controls The following diagram shows the location of the controls on the front of the drive. «1¬ Power light This light is visible when the drive is in use. «2¬ Eject button Press this button to eject a DVD or CD. «3¬ Manual eject hole Use this emergency release to eject a DVD or CD when the Eject button does not work. For more information on manually ejecting a DVD or CD, see “Manually ejecting a disc” on page 7. Chapter 1. About the CD-RW/DVD drive 3
Resumen del contenido incluido en la página 12
4 ThinkPad CD-RW/DVD-ROM Combo III Ultrabay 2000 Drive: User’s Guide
Resumen del contenido incluido en la página 13
Chapter 2. Using the CD-RW/DVD drive This section provides information on how to handle, load, and care for DVDs and CDs and how to care for your CD-RW/DVD drive. Before you begin For best results, review the following guidelines before using the drive: v Do not move your ThinkPad computer while formatting or writing a disc as this might cause data errors. Also, minimize typing while formatting or writing to a disc, as this might also cause data errors. v Keep the ThinkPad computer on a flat sur
Resumen del contenido incluido en la página 14
v Handle a disc by the edges or the center hole. Do not touch the surface of a disc. v To remove dust or fingerprints, wipe a disc from the center to the edge with a soft, lint-free cloth. v Do not write on the surface of a disc. v Do not place a disc in direct sunlight. v Do not use commercial cleaners to clean a disc. v Do not bend a disc. Caring for the CD-RW/DVD drive To protect your drive during operation, observe the following precautions: v Remove the disc from the drive before moving the
Resumen del contenido incluido en la página 15
Loading a disc 1. Press the Eject button. The tray slides out of the drive. 2. Place a disc in the tray with the label facing up. 3. Close the tray by gently pushing the tray in until it latches. Attention: Do not use force or insert foreign objects to open the tray. If your tray does not open when you press the Eject button, see “Manually ejecting a disc” for more information. Manually ejecting a disc If you press the Eject button and the tray does not slide out, turn off the computer and strai
Resumen del contenido incluido en la página 16
2. Install WinDVD (the DVD movie player program). Note: For Windows 95, the DVD movie player is supported by Windows 95 OSR2.0 or later versions. You can check which version of Windows 95 you are using by doing the following: 1. Click Start, move the cursor to Settings, and then click Control Panel. 2. Double-click System. Read the numbers under “System”. v 4.00.950B means that your version is Windows 95 OSR2.0 or OSR2.1. v 4.00.950C means that your version is Windows 95 OSR2.5. Enabling the DMA
Resumen del contenido incluido en la página 17
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using the ThinkPad A21e computer.) 7. Select the DMA is available as the Transfer Mode. 8. Click OK. 9. Click Close to close System Properties window. A message displays, informing you that the system settings have changed. 10. Click OK to restart the system. Installing WinDVD and viewing a DVD movie To install WinDVD, go to the ²Software² section of the Software and User’s Guide CD. After you install the CD-RW/DVD drive and Win
Resumen del contenido incluido en la página 18
To display the region code status, click the WinDVD Properties button on the WinDVD user interface. The General tab contains this information. Starting WinDVD To start WinDVD, complete the following procedure: 1. Click Start. 2. Click Programs. 3. Click InterVideo WinDVD. 4. Click InterVideo WinDVD to open the DVD movie player window. For more information on how to play the DVD movie player, refer to the WinDVD help information on the Software and User’s Guide CD. If you want to watch a DVD movi
Resumen del contenido incluido en la página 19
For more information on using the software, refer to the IBM RecordNow and IBM DLA help information on the Software and User’s Guide CD. Backing up a CD To copy a commercial CD, you must own the copyright or obtain permission from the copyright owner. If you do not own the copyright or do not obtain permission from the copyright owner, you might be violating copyright law and might be subject to payment of damages or other remedies. For more information on copyright law, consult your legal advis
Resumen del contenido incluido en la página 20
You cannot eject a CD. Take the following actions after ensuring that the drive is not in the process of writing to a disc: 1. Eject the CD through software. 2. Use the Eject button. 3. Turn off the computer. Wait 45 seconds; then turn on the computer and try using the Eject button again. 4. If other methods do not work, use the manual-eject hole, using instructions given in “Manually ejecting a disc” on page 7. You cannot read from the CD after successfully writing to it. Take the following act
