Manual de instrucciones de Apple

Resumen del contenido incluido en la página 1

Unpacking and wall mounting instructions
For the unpacking instructions follow the illustrated steps 1 to 5 printed
on the packaging (outside and inside).
For the wall mounting instructions follow the illustrated steps 6 to 8
printed on the first pages of this instruction booklet.
Make sure that the wall mount is being fixed securely enough so that it meets
safety standards.The weight of the monitor (excl. packaging) is about 43 kg.
Connect your computer
& Connect one end of the VGA cable 1 supp

Resumen del contenido incluido en la página 2

Use of the remote control Computer Display modes VGA 640x480 31.468 kHz 60 Hz VGA 640x400 31.468 kHz 70 Hz VGA 640x350 31.468 kHz 70 Hz MAC II 640x480 35.000 kHz 67 Hz SVGA 800x600 35.156 kHz 56 Hz XGA 1024x768 45.000 kHz 56 Hz When a VGA computer is connected, the selection is made automatically. A message is displayed when the monitor does not support one of the above mentioned VGA modes. Switch your computer to a correct display mode. Operation & Insert the mains plug 5 (see previous

Resumen del contenido incluido en la página 3

Use of the remote control Use of the remote control B no function VGA no function FRONT no function VGA OK B OK to activate your choice AV1, AV2, AV3,AV4 no function FRONT o MENU to switch the VGA menu on/off cursor keys to select your choice and to AV1 p MENU π alter a selected adjustment AV2 œ pπ Picture format In VGA mode, press the p or π keys to AV3 ¬ switch between a 4:3 or a 16:9 picture format. AV4 PICTURE SOUND SMART CONTROLS ¬ Mute key - CH/P + no function - CH/P+-V+ temporarily mute t

Resumen del contenido incluido en la página 4

Tips Ambient temperature higher altitude, the picture becomes Transport unstable and the picture performance is Do not hang up the monitor above a Keep the original packaging to transport the deteriorating. Bringing the set below 2000 central heating or other heating sources. monitor if needed. m it works fine again.Transportation has no influence. Active Loop Through End of life directives The Active Loop Through facility makes it Philips is paying a lot of attention to Control of peripheral e