Resumen del contenido incluido en la página 1
45261
Home Monitoring
Wireless Color
Camera with
Portable LCD
Monitor
User Manual
www.jascoproducts.com
1-800-654-8483
Resumen del contenido incluido en la página 2
2 Thank you for purchasing the GE 45261 Wireless Color Camera System with Portable LCD Monitor. Please review these instructions carefully before attempting to operate the unit. PRODUCT FEATURES • “Wi-Fi” internet friendly wireless system—won’t interfere with home wireless networks • Portable 2.5” LCD color monitor/receiver goes anywhere • View up to two cameras automatically • Audio Detection & Notifi cation feature—alerts when sound is detected in a monitored area • Night Vision feature f
Resumen del contenido incluido en la página 3
3 PACKAGE CONTENTS Please check and identify all the parts before proceeding with the installation. 1. 45233 Wireless Color Camera 2. 452 61 Portable 2.5” Color Monitor/Receiver 3. Charging cradle 4. Wall mounting hardware 5. 2 AC adapters 6. AV cable BEFORE YOU INSTALL When choosing the best location for the placement of the camera and LCD monitor, it is best to avoid any sources of possible RF interference such as microwave ovens and cordless phones. Proximity to these and other sources o
Resumen del contenido incluido en la página 4
4 CHOOSING A CAMERA MOUNTING LOCATION The 45233 Wireless Color Camera can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or outdoor use. When choosing a mounting location, please be advised: • Do not use in wet locations. If using outside, position camera in a sheltered location. • Do not position the camera so that it points directly into the sun or any bright light, as this may cause damage to the camera. • Avoid viewing areas where half the area is in brigh
Resumen del contenido incluido en la página 5
5 If using the optional rechargeable NiMH battery (sold separately), the operational time is up to 5 hours, depending on usage. • The Camera has an unobstructed wireless transmission range up to 200 ft. from the receiver. Transmission distance indoors is reduced due to interior walls, wiring, household fi xtures and metal plumbing. CONNECTING THE CAMERA TO THE PORTABLE LCD MONITOR Before beginning installation, we recommend that you temporarily “connect” the 45233 Color Wireless Camera
Resumen del contenido incluido en la página 6
6 2. Similarly, set the slide switch located inside the battery compartment area of the Portable LCD monitor to match the channel used by the camera. 3. Plug AC power adapter of the LCD monitor into the power jack at the rear of the charging base. This provides power to the Portable LDC monitor and also charges the LCD monitor’s battery. 4. Turn on the LCD monitor by pressing the POWER button on the front of the monitor. Adjust the volume to the midpoint position. 5. Be sure to charge t
Resumen del contenido incluido en la página 7
7 CHANNEL SELECTION LCD Manual, Auto or Stand-by MONITOR The wireless system can be Adjustable Antenna set to operate in one of three modes: Power Manual, Auto or Manual Stand-by. The Auto desired operating mode can be selected Stand by using the buttons on the front panel of the LCD monitor. Manual Mode To select one of the two channels manually, press the ‘M’ (Manual) button on the front panel of the Monitor. The green LED will light for the corresponding channel. The Monitor will
Resumen del contenido incluido en la página 8
8 Portable LCD Monitor Settings OFF 1 2 Camera 1 only ON 1 2 1 2 OFF 1 2 Camera 2 only ON OFF 1 2 CAMERA 1 CAMERA 2 Camera 1 & 2 ON Channel Setting Channel Setting separately. IMPORTANT: When using more than one camera, each camera must be assigned to a specifi c channel using the channel selection switch located on the underside of the camera housing. Select either 1 or 2 for each camera. Each camera must be assigned to a specifi c channel; both cameras
Resumen del contenido incluido en la página 9
9 Note: two cameras must be available in order for Auto mode to operate correctly. Both cameras cannot be on the same channel or the signals will cancel out. Stand-by Mode Pressing the ‘S’ button places the system in Stand- by mode and will utilize the Audio Notifi cation/ Detection feature (see pg. 12). The LCD monitor screen will turn off while in standby mode. In this mode the system continuously scans the active cameras. If a camera detects sound, the LCD monitor will turn on, display t
Resumen del contenido incluido en la página 10
10 Night Vision Infra-Red (IR) LEDs The 45233 Wireless Color Camera features Night Vision technology. Objects and images can be seen in little or no light up to 10 ft. Sensor The camera uses a special image sensor that automatically detects available light levels. It turns on/off the Infra-Red (IR) LEDs on the front of the camera. These LEDs provide artifi cial light that allows the camera to ‘see’ in the dark. Night Vision will appear as a Black and White image. When the image senso
Resumen del contenido incluido en la página 11
11 corresponds to the camera channel setting. 5. Adjust antenna and camera angle as needed for the clearest picture. Positioning the antenna upwards to improve sensitivity, and downwards to reduce sensitivity. Take care not to force the antennas past their lock positions. Wall Mount: 1. To simplify the wall mount process, you will fi nd a custom wall mounting plate included with the mounting hardware. 2. Select the ideal location. Using the supplied mount as a template, drill two 3/16” ho
Resumen del contenido incluido en la página 12
12 3. Set Channel switch on camera to 1 or 2. Slide the camera onto the alignment and locking pins of the mounting plate. Plug in AC adapter into camera. 4. Adjust antenna and camera angle as needed for the clearest picture. AUDIO DETECTION AND NOTIFICATION FEATURE This feature allows the system to emit an audio alert whenever sound is detected within a monitored area. When the camera detects a sound, the LCD Monitor will sound an alert and then display the picture from the camera that de
Resumen del contenido incluido en la página 13
13 2. Pressing the “menu” button twice… • the Middle LED will light-up in blue. You can then adjust the Color by pressing “+” or “-” on the Volume/Adjust Button. If no input is received within 30 seconds, it will revert back to Volume Adjust mode automatically. 3. Pressing the “menu” button three times… • the Third LED will light-up in blue. You can then adjust the Contrast by pressing “+” or “-” on the Volume/Adjust Button. If no input is received within 30 seconds, it will revert back
Resumen del contenido incluido en la página 14
14 USING THE 452 61 WIRELESS COLOR CAMERA SYSTEM WITH A VCR You can connect the 45261 LCD Monitor (using the supplied A/V cable) to a VCR, DVR or another monitor in order to record/view the images received from up to 2 cameras. If connected to VCR or DVR, the VCR/ DVR must also be connected a TV/Monitor in order to see live or recorded images. Video Audio In In A/V OUT VCR A/V Out Jack If you have any questions or feel the camera system is not operating correctly, or you simply need addit
Resumen del contenido incluido en la página 15
15 approximately 5 hours* on a single charge. To order this battery, please visit www.jascoproducts.com/ batteryoffer or call our Customer Support department at 1-800-654-8483, Monday–Friday, 8 a.m.–5 p.m. CST. Wall or desktop mount AC adapter charges the battery *If using the camera with battery in the night vision mode, usage is reduced to ~2 hrs. TROUBLE SHOOTING No camera picture 1. Check all connections. Make sure camera(s) & monitor are powered ON. 2. Ensure camera(s) & monitor are
Resumen del contenido incluido en la página 16
16 Interference on camera picture 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, LCD monitor or both to improve the reception quality. 3. Reposition other nearby equipment transmitting on the 900MHz frequency. 4. Adjust the antenna for the camera, LCD monitor or both to obtain best image. Audio problems 1. Ensure the volume is turned up suffi ciently on the monitor 2. Make sure the sound is wit
Resumen del contenido incluido en la página 17
17 Mini. Illumination: .............................................. 0 lux at 3 ft, 0.5 lux at 10ft Voltage................................................................................................................. 9VDC Current Consumption: .....................................................150mA maximum Modulation: ............................................................................................................. FM Channel Selection: .........................................
Resumen del contenido incluido en la página 18
18 WARNING Risk of fire and shock • Only use the supplied cUL listed AC to DC adapter. • The supplied adapter is for indoor use only. • Do not run the camera cable inside walls; when securing the cable, do not cut or puncture • Do not use in wet locations FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferen
