Résumé du contenu de la page N° 1
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VP-501N
UXGA Scan Converter
P/N: 2900-300183 Rev 5
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 3 2.3 Recycling Kramer Products 3 3 Overview 4 3.1 Defining the VP-501N UXGA Scan Converter 5 3.2 Input Resolutions 6 4 Connecting the VP-501N UXGA Scan Converter 7 5 Operating the VP-501N UXGA Scan Converter 9 5.1 Using the Quick-Set Buttons 9 5.2 Adjusting the Display via the Menu Buttons 10 5.3 Using the Menu 11 5.4 Using the Test Patterns 11 5.5 Saving and Recalling 12
Résumé du contenu de la page N° 4
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifi
Résumé du contenu de la page N° 5
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if i firmware upgrades are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performance: Use only good quality
Résumé du contenu de la page N° 6
2.2 Safety Instructions Caution: There are no operator serviceable parts inside the unit ! Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing 2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
Résumé du contenu de la page N° 7
3 Overview The V P −5 0 1 N is a scan converter for computer graphics and HDTV component video signals. It converts the input up to UXGA (1600x1200) and HDTV (1080p) to composite and s−Video (Y/C) signals simultaneously in either PAL or NTSC formats. In particular, the VP-501N features: User-friendly front panel buttons for easy control of ProcAmp functions, flicker-reduction, image optimization, one-touch freezing, over-scanning and under-scanning Memory locations to save and rec
Résumé du contenu de la page N° 8
3.1 Defining the VP-501N UXGA Scan Converter Figure 1: VP-501N UXGA Scan Converter # Feature Function 1 12V DC Power Connector +12V DC connector for powering the unit 2 Y/C OUT 4-pin Connector Connects to the s-Video acceptor 3 CV OUT BNC Connector Connects to the composite video acceptor 4 PAL/YUV DIP-switch Selects the video standard (OFF for PAL, ON for NTSC) and the color space standard (OFF for YUV, ON for RGB), see Section 5 .6 5 INPUT 15-pin HD Connector Connects to the comp
Résumé du contenu de la page N° 9
3.2 Input Resolutions The VP-501N supports the following resolutions: Supported Input Resolutions Resolution (VGA) Refresh Rate (Hz) 640x480 60 800x600 60 1024x768 60 1152x864 75 1280x800 60 1280x1024 60 1280x1024 75 1366x768 60 1440x900 60 1400x1050 60 1600x1200 60 Resolution (Component) Refresh Rate (Hz) 1080i 60 1080i 50 1080p 60 1080p 50 720p 60 720p 50 480p 60 576p 50 6 VP-501N - Overview
Résumé du contenu de la page N° 10
4 Connecting the VP-501N UXGA Scan Converter Always switch OFF the power on each device before connecting it to your VP-501N. After connecting your VP-501N, connect its power and i then switch on the power on each device. To connect the VP-501N, as the example in Figure 2 shows, do the following: 1. Connect a computer graphics source to the 15-pin HD INPUT connector (for example, a PC as shown in Figure 2), or alternatively, connect a high definition source to the 15-pin HD INPUT co
Résumé du contenu de la page N° 11
Figure 2: Connecting a Computer Graphics Source to the VP-501N Figure 3: Connecting a High-Definition Source to the VP-501N 8 VP-501N - Connecting the VP-501N UXGA Scan Converter
Résumé du contenu de la page N° 12
5 Operating the VP-501N UXGA Scan Converter You can operate your VP-501N via the front panel buttons that function as: User-friendly front panel buttons for easy control of ProcAmp functions, flicker-reduction, image optimization, one-touch freezing, over-scanning and under-scanning Menu buttons: MENU, ENTER, – and +; or Quick-set buttons: FREEZE and OS/US (dual-purpose buttons) This section describes how to: Use the quick-set buttons (see Section 5.1) Use the set of menu
Résumé du contenu de la page N° 13
5.1.2 Using the OS/US Button Press the OS/US button to toggle between over-scan and under-scan: Over-scan omits the border. The displayed image, when set correctly, is larger than the screen Making the data bigger and easier to read but running the risk of having some of it run off the edge of the screen Under-scan (sometimes know as the Compress mode) leaves a border around the image The image appears reduced in size with a margin around it so that none of the data gets lost
Résumé du contenu de la page N° 14
5.3 Using the Menu Using the main menu, you can adjust the screen display (screen adjustments apply to both CV and Y/C displays). After pressing the MENU button (quick set- buttons are disabled), the main Menu (the menu times-out after 20 seconds of inactivity) appears on the screen. Use the menu buttons to scroll through the menu and make the required adjustments. Section 5.3.1 defines the menu items. 5.3.1 Menu Items Menu Items Function Picture Setup Contrast – set the contrast Bri
Résumé du contenu de la page N° 15
Figure 5: Test Pattern Example You can set a test pattern to appear on the screen when there is no input connected to the VP-501N. To do so, enter the Advanced menu, select No Input and set a test pattern number. This test pattern will appear when there is no input connected. 5.5 Saving and Recalling The VP-501N lets you save and recall up to four setups (from 0 to 3). The Save mode stores all the menu settings in one of the four Save setup numbers. Saving Through the Advanced Menu
Résumé du contenu de la page N° 16
Setup 1 is recalled The unit is disconnected The unit is reconnected Setup 2 appears (since it was saved last) 5.5.1 Saving When Exiting the Menu Whenever a change to the setup is made, you are prompted to save the changes (the Save Setting item does not timeout, it remains until No or Yes is selected), be it recalling a different setup, or changing the Zoom mode: Select No to cancel setup changes Select Yes to save setup changes Changes are saved to the setup number curr
Résumé du contenu de la page N° 17
6 Technical Specifications INPUT: 1 x VGA/UXGA, analog component HD on an 15-pin HD connector OUTPUTS: 1 composite video 1Vpp/75 on a BNC connector 1 Y/C (s-Video) 1Vpp/75 (Y), 0.3Vpp/75 (C) on a 4-pin connector MAX. OUTPUT LEVEL: VGA up to UXGA; 480p, 576p, 720p, 1080p CONTROLS: Front panel and OSD: ProcAmp video controls, freeze, underscan / overscan, 8 color bars POWER CONSUMPTION: 12V DC, 380mA OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE: -40°
Résumé du contenu de la page N° 18
Résumé du contenu de la page N° 19
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING Disconnect the unit from the power ! supply before opening and servicing 2900-300183 5 P/N: Rev:
