Résumé du contenu de la page N° 1
2.4 GHz 2-Line Digital Spread
Spectrum Cordless Phone
with Call Waiting/Caller ID
Owner’s Manual
Please read before using this equipment.
Résumé du contenu de la page N° 2
Important Information This telephone has been tested and found to the device's ringer equivalence number, or comply with all applicable UL and FCC stan- REN. The REN is on the bottom of your dards. phone. If you use more than one phone or other de- WARNING: To reduce the risk of fire or vice on the line, add up all of the RENs. If the shock hazard, do not expose this product to rain total is more than five (three in rural areas), or moisture. your telephones might not ring. If ringer oper- ati
Résumé du contenu de la page N° 3
you of your right to file a complaint with the THE FCC WANTS YOU TO FCC. KNOW Also, the phone company can make changes This equipment has been tested and found to its lines, equipment, operations, or proce- to comply with the limits for a Class B digital dures that could affect the operation of this device, pursuant to Part 15 of the FCC telephone. The telephone company notifies Rules. These limits are designed to provide you of these changes in advance, so you can reasonable protection against
Résumé du contenu de la page N° 4
has been disconnected at the network 14. Do not overload wall outlets and exten- interface. sion cords as this can result in a risk of fire or electric shock. 6. Use caution when installing or modifying telephone lines. 15. Never push objects of any kind into this product through cabinet slots as they 7. Do not fix the AC power supply cord to may touch dangerous voltage points or building surfaces with metal fittings (if short out parts that could result in a risk the product has an AC power cor
Résumé du contenu de la page N° 5
18. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 19. Do not use the telephone to report a gas leak in the vicinity of the leak. BATTERY SAFETY INSTRUCTIONS Caution: To reduce the risk of fire or injury, read and follow these instructions. 1. Use only the appropriate type and size battery pack specified in the instruction manual provided for this product. 2. Do not dispose of the battery pack in a fi
Résumé du contenu de la page N° 6
Contents Features .................................................................................................................................. 8 Installation ............................................................................................................................ 10 Mounting the Phone ........................................................................................................ 10 Connecting to the Phone Lines .................................................
Résumé du contenu de la page N° 7
Testing Stored Emergency Numbers ....................................................................... 23 Reviewing Memory Numbers (Handset Only) ................................................................ 23 Dialing a Memory Number .............................................................................................. 23 Chain-Dialing Service Numbers ..................................................................................... 23 Caller ID Operation (Handset Only) ........
Résumé du contenu de la page N° 8
Features 40-Number Memory Dialing Your RadioShack 2.4 GHz 2-Line Digital — lets you Spread Spectrum Cordless Speakerphone store up to 40 numbers in memory (30 on the uses advanced cordless telephone technolo- handset and 10 on the base) for easy dialing. gy to give you superior audio quality and ex- Paging/Two-Way Intercom System — lets tended range. The phone lets you place and you send a signal from the base to the hand- receive calls on two separate telephone set, or from the handset to th
Résumé du contenu de la page N° 9
Line Status Indicators — show if a line is available, in use, or on hold. Headset Jack — lets you make or answer calls with handsfree convenience using an optional headset. Auto Talk — you can set the phone so you can answer a call by just lifting the handset from the base. Any Key Answer — you can set the phone so you can press any key to answer a call when the handset is away from the base. Redial — lets you quickly redial any of the last three numbers dialed on the handset, or the last number
Résumé du contenu de la page N° 10
Installation Notes: MOUNTING THE PHONE • Your telephone connects directly to a You can place the phone’s base on a desk or modular telephone line jack. If your tele- table, or mount it on a standard wall plate or phone wiring does not have a modular directly on a wall. Choose a location that is: jack, you can update the wiring yourself • near an AC outlet using jacks and adapters (available at your local RadioShack store), or have • near a modular telephone line jack the telephone company upda
Résumé du contenu de la page N° 11
the base and route the adapter’s cord On a Desk Top through the strain relief slot on the bot- 1. Insert the bracket’s tabs into the base’s tom of the bracket. upper tab slots, then press down on the 4. Plug the adapter into a standard AC out- bracket’s clips and insert them into the let. clip slots. 5. Connect the phone cord(s) to the modu- lar phone line jack(s). 6. Raise the base’s antenna to a vertical position. On a Wall Plate or Wall 1. Insert the bracket’s tabs into the base’s lower tab s
Résumé du contenu de la page N° 12
secure it. If you are using two phone CONNECTING, CHARGING, cords, plug the second cord into the sec- AND REPLACING THE ond phone jack. BATTERY PACK 6. Plug the adapter into a standard AC out- The phone comes with a rechargeable nick- let. el-cadmium battery pack installed in the handset, but not connected. Before using 7. Press and lift out the handset holder, flip your phone, you must connect the battery it over, then snap it back into place. pack, then charge it for about 24 hours. 8. Raise
Résumé du contenu de la page N° 13
• If the handset’s display is blank and the Important: The EPA certified ® phone does not work, recharge the bat- RBRC Battery Recycling Seal tery pack. (The battery power might be on the nickel-cadmium (Ni-Cd) too low to light the display.) battery indicates RadioShack is voluntarily participating in an • If the battery pack becomes weak during industry program to collect and recycle these a call, the handset beeps every 3 sec- batteries at the end of their useful life, when onds and Be Be Be B
Résumé du contenu de la page N° 14
Note: The phone exits setting mode if a call SETTING AUTO TALK or page is received, or if you press LINE 1 or Your phone is preset so you must press LINE LINE 2. 1 or LINE 2 to answer a call. With auto talk turned on, you can answer a call by lifting the ADJUSTING THE RINGER handset from the base (or any key on the handset if the handset is away from the The phone lets you control its base and base). handset ringer volume separately. You can choose from a high or low ringer setting or Note: Auto
Résumé du contenu de la page N° 15
3. A menu appears with 7kje 7kje 7kje 7kje JW JW JW JWbbbba aa a selected. 5. Press SELECT/CH to store the area Press CONF/9 9 9 9 to select 9?:9M 9?:9M 9?:9M 9?:9M, then code, then press CID/HOLD and return press SELECT/CH to change the setting. the handset to the base to store your Ed Ed Ed Ed or E\ E\ E\ E\\\\\ appears indicating the selected new entry. setting. 4. Press CID/HOLD and return the handset to the base to store the new setting. STORING YOUR AREA CODE You can store your local area
Résumé du contenu de la page N° 16
Basic Operation Note: You can use the keypad on either the To answer a call, lift the handset and press handset or the base to operate the phone. To the ringing line button. If auto talk is on, lift make a call with the speakerphone, you must the handset from the base, or if the handset use the base’s keypad; to make a call with is away from the base, press any key. The the handset, you must use the handset’s display changes to show the elapsed time on keypad. the call. If you receive a call
Résumé du contenu de la page N° 17
pear on the handset’s display as a reminder Note: Mute is released when you press IN- that the line is in use. TERCOM or HOLD, or you press either line button to switch the line. If either line indicator is flashing, someone at the handset is using the line. Press the line PUTTING A CALL ON HOLD button for a line that is not in use. Press HOLD (CID/HOLD on the handset) to To end a speakerphone call, simply press put a call on hold. The indicator for that line LINE 1 or LINE 2. The line indicator
Résumé du contenu de la page N° 18
the other, press the line button you want USING BOTH THE HANDSET to hang up. AND SPEAKERPHONE If you want to talk on one line without discon- To use the handset to join a call at the base, necting the other, press HOLD or CID/HOLD, or to use the base to join a conversation at then the button for the line you want to talk the handset, press the line button for the line on. To return to a 3-way conversation, press in use. You hear a busy tone: before the tone CONF or CONF/9 9 9 9. ends, press the
Résumé du contenu de la page N° 19
For example, if you have Call Waiting, press USING THE PHONE WITH FLASH to answer an incoming call without EXTENSION PHONES disconnecting the current call. Press FLASH again to return to the first call. The phone detects when an extension phone is in use. The corresponding line indicator Note: If you do not have any special servic- flashes on the base and ?d ?d ?d ?d Ki[ Ki[ Ki[ Ki[ flashes on the es, pressing FLASH might disconnect the handset’s display along with B_ B_ B_ B_d[ d[ d[ d[ '''' o
Résumé du contenu de la page N° 20
Note: The paging ends in one minute if no- • DEL/VOL on the handset also controls body answers. Press INTERCOM or 8 8 8 8/IN- the connected headset’s volume. TCM again. • If you place the handset on the base to To end an intercom call, press 8 8 8 8/INTCM or recharge it while the headset is con- INTERCOM. nected, be sure the handset seats prop- erly. During a call, you can page someone at ei- ther the base or the handset to join the con- With a headset connected, you make or an- versation. Press
