Résumé du contenu de la page N° 1
2.4 GHz Digital Spread Spectrum
Cordless Telephone
with Caller ID/Call Waiting Deluxe
Owner’s Manual
Please read before using this equipment.
Résumé du contenu de la page N° 2
Read This First This phone has been tested and found to Where Caller ID is offered, one or more op- comply with all applicable UL and FCC stan- tions are generally available: dards. • caller’s number only WARNING: To reduce the risk of fire or • caller’s name only shock hazard, do not expose this product to rain or moisture. • caller’s name and number. CAUTION IMPORTANT SAFETY RISK OF ELECTRIC SHOCK. INSTRUCTIONS ! DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF When using your telephone equipme
Résumé du contenu de la page N° 3
ers or aerosol cleaners. Use a damp 16. To reduce the risk of electric shock, do cloth for cleaning. not disassemble this product. Take it to a qualified serviceman when service or 9. Do not use this product near water, for repair work is required. Opening or example, near a bath tub, wash bowl, removing covers may expose you to kitchen sink, or laundry tub, in a wet dangerous voltages or other risks. Incor- basement, or near a swimming pool. rect reassembly can cause electric shock when the pro
Résumé du contenu de la page N° 4
draw as the phone’s ringer equivalence num- BATTERY SAFETY ber, or REN. The REN is on the bottom of INSTRUCTIONS your phone. CAUTION: TO REDUCE THE RISK OF If you use more than one phone or other de- FIRE OR INJURY, READ AND FOLLOW vice on the line, add up all the RENs. If the THESE INSTRUCTIONS. total is more than five (three in rural areas), your phones might not ring. If ringer opera- 1. Use only the appropriate type and size tion is impaired, remove one of the devices battery pack specified
Résumé du contenu de la page N° 5
Lightning THE FCC WANTS YOU TO KNOW Your telephone has built-in protection circuits to reduce the risk of damage from surges in In the unlikely event that your phone causes telephone line and power line current. These problems on the phone line, the phone com- protection circuits meet or exceed the FCC pany can temporarily discontinue your ser- requirements. However, lightning striking the vice. If this happens, the phone company telephone or power lines can damage your attempts to notify you i
Résumé du contenu de la page N° 6
Contents Features .................................................................................................................................. 7 Installation .............................................................................................................................. 8 Mounting the Phone ............................................................................................................. 8 Selecting a Location .....................................................
Résumé du contenu de la page N° 7
Features Caller ID Memory Your RadioShack 2.4 GHz Digital Spread — stores up to 50 Caller Spectrum Cordless Telephone uses ad- ID records. vanced technology to give you superior au- Headset Jack — lets you connect an option- dio quality and extended range. al headset (available from your local The phone’s Caller ID unit records each call- RadioShack store) for hands-free conve- er’s telephone number (and name, if avail- nience. able in your area) and the date and time of 20-Number Memory Dial
Résumé du contenu de la page N° 8
Installation • Always connect the AC adapter to the MOUNTING THE PHONE phone before you connect it to AC power. If you disconnect the power, dis- Selecting a Location connect the adapter from AC power before you disconnect it from the phone. You can place the phone’s base on a desk or table, or mount it on a standard wall plate or Your telephone connects directly to a modu- directly on a wall. Choose a location that is: lar telephone line jack. If your telephone wir- ing does not have a modula
Résumé du contenu de la page N° 9
2. Plug one end of the supplied long modu- 2. Plug one end of the supplied short mod- lar cord into TEL LINE. ular cord into the TEL LINE jack on the back of the base. DC IN 9V Jack TEL LINE 3. Insert the supplied AC adapter’s barrel plug into DC IN 9V. 4. Route the adapter’s cord through the strain relief slot on the base. 5. Plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure 3. Insert t
Résumé du contenu de la page N° 10
Note: To mount the phone directly on a wall, 1. Press down and slide off the battery 3 you need two screws of at least 1 /8 inch long pack compartment cover. (not supplied) with heads that fit into the key- 2. Lift the battery pack out of the compart- hole slots on the bottom of the base. ment. Follow the steps under “On a Wall Plate or 3. Plug the battery pack’s connector into Wall” on Page 9, then apply these additional the socket in the compartment (the con- instructions for placement on a w
Résumé du contenu de la page N° 11
• Using a pencil eraser, clean the charg- Important: The EPA certified ® ing contacts on the handset and base RBRC Battery Recycling Seal about once a month. on the nickel-cadmium (Ni-Cd) battery indicates RadioShack • If the battery pack becomes weak during is voluntarily participating in an a call, the handset beeps every 3 sec- industry program to collect and recycle these onds and Be Be Be Bem m m m 8Wjj[ho 8Wjj[ho 8Wjj[ho 8Wjj[ho flashes. When this batteries at the end of their useful life,
Résumé du contenu de la page N° 12
4. Press TALK or place the handset on the 2. Press SELECT/CH to change the auto base to hang up. talk setting. Ed Ed Ed Ed or E\ E\ E\ E\\ \\ \ appears. 3. Return the handset to the base or press SETTING THE RINGER FUNC to store the new setting. TONE/VOLUME TURNING CALLER ID/ You can select one of four different ringer tone/volume settings on the handset. At any CALL WAITING ON/OFF time, except during a call, repeatedly press If you subscribe to Call Waiting with Caller ID VOL/CID 8 8 8 8 or 9
Résumé du contenu de la page N° 13
Follow these steps to store your area code. 1. Lift the handset and press FUNC. 2. Press 3 or VOL/CID 9 9 9 9 twice to select 7h[W 7h[W 7h[W 7h[W 9eZ[ 9eZ[ 9eZ[ 9eZ[. 3. Press SELECT/CH, then enter your three-digit area code. If you make a mis- take, repeatedly press 6 6 6 6/ or #/7 7 7 7 to move the cursor over the incorrect digit, then enter the correct number. Note: If an area code is already stored, it appears on the display. To delete the area code, press SELECT/CH, press DEL three times, t
Résumé du contenu de la page N° 14
Operation A QUICK LOOK AT YOUR PHONE The handset window has plastic film on it to protect it during shipment. Carefully peel off the film before using your phone for the first time. VOL 8 8 8 8/9 9# 9 9### — To adjust the handset’s volume during a call, press VOL/CID 8 8 8 8 or 9 9 9 9 to select Lebkc[ L L Lebkc[ ebkc[ ebkc[ CWn_c CWn_c CWn_c CWn_ck k k kc c c c, Le Le Le Lebbbbk k k kc c c c[ [ [ [ >_] >_] >_] >_]^ ^ ^ ^, Le Le Le Lebbbbk k k kc c c c[ [ [ [ C[ C[ C[ C[Z_ Z_ Z_ Z_kc kc
Résumé du contenu de la page N° 15
Each number can be up to 20 digits, and USING TONE SERVICES ON each name can be up to 13 characters. A PULSE LINE Some special services, such as bank-by- Storing a Number and Name in phone, require tone signals. If you have Memory pulse service, you can still use these special tone services by following these steps. When you are storing a number in memory, an error tone sounds and the phone exits the 1. Be sure PULSE-TONE is set to PULSE. storing process if you wait more than 20 sec- onds betw
Résumé du contenu de la page N° 16
Finally, press 6 five times; lower case d d d d Editing or Deleting a Number in appears. Memory To enter two letters from the same key in Follow these steps to edit or delete a memo- a row, press #/7 7 7 7 to move the cursor to ry number. the next position. For example to enter AB, press 2; 7 7 7 7 appears. Then press #/ 1. Lift the handset. 7 7 7 7, the cursor moves to the next posi- 2. Hold down MEM until C[ceho C[ceho C[ceho C[ceho Ije Ije Ije Ijehhhh[ [ [ [ and a tion, then press 2 twice so
Résumé du contenu de la page N° 17
entry. You can add more pause entries for a press MEM and enter the number for the lo- longer pause. cation where the additional information is stored. Reviewing Memory Numbers Testing Stored To review your memory numbers, press Emergency Numbers MEM. The list of memory location numbers (01–20) appears with the name stored with If you store an emergency service’s number each number (or 2C[ceho 2C[ceho 2C[ceho 2C[cehodd dd dd4 d4 d4 4 if you did not (police department, fire department, ambu- sto
Résumé du contenu de la page N° 18
• You can use a handset holder (available hang the handset on your belt for from your local RadioShack store) to greater convenience. Caller ID Operation If you subscribe to Caller ID service from • subscribe to the Options service from your phone company, the phone company your telephone company. sends information about the call, as well as • set the Caller ID/Call Waiting feature to the time and date, between the first and sec- Opt (see “Turning Caller ID/ Call Waiting ond rings of every cal
Résumé du contenu de la page N° 19
tion voice mail, if available. Je Je Je Je Le Le Le Le____Y Y Y Y[ [ [ [ CW CW CW CW_b _b _b _b If you decide to include the second caller in appears on your phone. your conversation with the first caller, scroll down to 9e 9e 9e 9ed\ d\ d\ d\[h[dY[ [h[dY[ [h[dY[ [h[dY[ or press 5. Press SELECT/ Note: Voice Mail is a service available CH. from some telephone companies. A call for a subscriber can be kept at the tele- Using Conference phone company and retrieved later on by calling the special nu
Résumé du contenu de la page N° 20
through the records. To scroll quickly through record does not show the area code. If it is the records, hold down VOL/CID 8 8 8 8 or 9 9 9 9. different, the record shows the area code. However, you can add or delete the area When you scroll past the last record, the total code on the display. When the record is on record number appears, then the first record. the display, press 3 to add or delete the area When you scroll past the first record, the total code. Pressing 3 again deletes or adds th
