Résumé du contenu de la page N° 1
MCD119
DVD Micro Theatre
Register your product and get support at
www.philips.com/welcome
User manual
pg001-pg034_MCD119-05-Eng 1 2007.8.10, 16:59
Résumé du contenu de la page N° 2
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug
Résumé du contenu de la page N° 3
1 7 8 2 9 3 0 ! 4 5 6 3 pg001-pg034_MCD119-05-Eng 3 2007.8.10, 16:59
Résumé du contenu de la page N° 4
1 4 $ ) ¡ ^ 5 6 8 7 7 8 9 & * @ 2; 0 # ! ( 2 ™ £ 3 % ≤ 4 pg001-pg034_MCD119-05-Eng 4 2007.8.10, 16:59
Résumé du contenu de la page N° 5
This product incorporates copyright protection Manufactured under license from Dolby Laboratories. technology that is protected by method claims of certain U.S. patents and other intellectual "Dolby", "Pro Logic" and the double-D symbol property rights owned by Macrovision are trademarks of Dolby Laboratories. Corporation and other rights owners. Use of this copyright protection technology must be MANUFACTURED UNDER LICENSE FROM authorized by Macrovision Corporation, and is DIGITAL THEATER SYSTE
Résumé du contenu de la page N° 6
Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486 Samoan 8377 Avestan 6569 Kalaallisut 7576 Sango 8371 Aymara 6589 Kannada 7578 Sanskrit 8365 Azerhaijani 6590 Kashmiri 7583 Sardinian 8367 Bahasa Melayu 7783 Kazakh 7575 Serbian 8382 Bashkir 6665 Kernewek
Résumé du contenu de la page N° 7
Contents General Information Disc Operations Features .................................................................. 9 Playing discs ......................................................... 21 Discs for playback ................................................ 9 Using the disc menu .......................................... 21 Supplied accessories ............................................ 9 Basic playback controls ............................... 21-23 Pausing playback Environmental infor
Résumé du contenu de la page N° 8
English Contents System Menu Options Basic operations ................................................. 26 SYSTEM SETUP ............................................ 26-28 TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT DIVX(R) VOD registration code LANGUAGE SETUP .......................................... 28 VIDEO SETUP .................................................... 28 BRIGHTNESS CONTRAST HUE SATURATION AUDIO SETUP ................................................... 28 3D PROCESSING
Résumé du contenu de la page N° 9
General Information Congratulations on your purchase and welcome to Philips! To fully benifit from the support that Philips offers, register your product at www.philips.com/welcome. Features Additional Component Connections Lets you connect other audio and audio/visual components to the system so you can use the The following formats can’t be supported system’s surround sound speakers. • The files like *.VMA, *.AAC, *.DLF, *.M3U, *.PLS, *.WAV, Parental control (rating level) • The discs r
Résumé du contenu de la page N° 10
English General Information/Maintenance Do not block the vents Environmental information ● Do not operate the system in an enclosed Any unnecessary packaging has been omitted. cabinet and allow about 10 cm (4 inches) of free We have tried to make the packaging easy to space all around the player for adequate separate into three materials: cardboard (box), ventilation. polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). 10 cm (4 inches) Your system consists of materials whic
Résumé du contenu de la page N° 11
Connections FM antenna Speaker Speaker (right) (left) AC power adaptor IMPORTANT! Step 1: Placing speakers – The type plate is located at the rear of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. –Never make or change any connections with the power switched on. – High voltage! Do not open.You run the risk of getting an electric shock. – The machine does not contain any user- serviceable parts. Place the front left and righ
Résumé du contenu de la page N° 12
English Connections Step 2: Connecting speakers Step 4: Connecting TV IMPORTANT! –You only need to make one video connection from the following options, depending on the capabilities of your TV system. – Connect the DVD system directly to the TV . Connect the speaker wires to the SPEAKER Using Video In jack (CVBS) terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into
Résumé du contenu de la page N° 13
Connections Using component Video In jack (Pr Pb Y) Using an accessory RF modulator ● Use the component video cables (red/blue/ IMPORTANT! green, not supplied) to connect the system’s PR/ – If your TV set only has a single PB/ Y jacks to the corresponding Component Antenna In jack (or labelled as 75 ohm or video input jacks (or labeled as Pr/Cr Pb/Cb Y or RF In), you will need a RF modulator in YUV) on the TV set. order to view the DVD playback via TV. ● To listen to TV channels through this sys
Résumé du contenu de la page N° 14
English Connections Step 5: Connecting the power AUDIO IN adaptor VIDEO IN L L R IMPORTANT! –Never make or change any connection with the power switched on. B After everything is connected properly, connect the AC power adaptor to the system and then to the power outlet. Using the VCR for recording DVDs B Connect one of the system's VIDEO OUT Optional: Connecting additional jacks to the corresponding VIDEO IN jack and equipment LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR. This
Résumé du contenu de la page N° 15
Controls Controls on the system Controls on the remote control 1 y 1 DBB – to switch the system on or to Eco-power – enables or disables bass enhancement. standby/normal standby mode. 2 DSC 2 Numeric Keypad (0-9) – selects different types of preset sound equalizer – inputs a track/title/chapter number of the disc. settings. 3 PROG/ANGLE 3 TUNING à / á –VCD/CD/MP3-CD: enters the program menu. Tuner .................... searches for a radio station –Tuner: programs preset radio stations. Disc ....
Résumé du contenu de la page N° 16
English Controls ¡ REPEAT A-B 0í/ë – for VCD/CD: to repeat a specific section within – Disc: skips to the previous/next chapter/title/ the same track. track. – for DVD: to repeat a specific section in a disc. –Tuner: selects a preset radio station. ™ AUDIO ! 9 for VCD – In DISC mode, to stop playback or clear a – sets Stereo, Mono-Left or Mono-Right sound program. mode. @ 2; for DVD – In DISC mode, to start or interrupt playback. – selects an audio language. – In TUNER mode, to activate the plug
Résumé du contenu de la page N° 17
Preparations IMPORTANT! Step 2: Setting the clock – Make sure to complete the preparation procedures before operating 1 Go to Standby mode. the system. 2 Press and hold DISPLAY/CLOCK on the remote control. Before using the remote control ➜ "SET CLOCK" is displayed briefly. Then, the 1 Pull out the plastic protective sheet. hour digits flash on the display screen. 2 Select the source you wish to control by pressing 3 Press VOLUME +/- on the front panel or VOL one of the source select keys on the
Résumé du contenu de la page N° 18
English Preparations PAL Step 3: Setting video – If the connected TV is PAL system, select this preference mode. It will change the video signal of a NTSC IMPORTANT! disc and output in PAL format. – Make sure you have completed all the AUTO necessary connections. (See –If the connected TV is multi system, select this "Connections-Connecting TV".) mode.The output format will be in accordance with the video signal of the disc. – Setting TV TYPE Select the aspect ratio of the TV to be connected. 4:
Résumé du contenu de la page N° 19
Preparations Note: OSD LANGUAGE (On-Screen Display) The format you select must be available on the Switches the display language on the TV screen. disc. If it is not, the setting for TV Type will not affect Select the language from the displayed list. the picture during playback. AUDIO LANG (DVD only) Switches the display language of the sound track. To exit the menu Select the language from the displayed list. Press SYSTEM MENU again. SUBTITLE LANG (DVD only) Switches the display language of th
Résumé du contenu de la page N° 20
English Basic Functions Switching the system on DSC (Digital Sound Control) ● Press ECO POWER/STANDBY-ON B on DSC provides a different type of preset sound the front panel. equalizer setting. ➜ The system will switch to the last selected ● Press DSC repeatedly to select: ROCK, JAZZ, source. POP, CLASSIC or OFF. ● Press SOURCE repeatedly (or DISC, TUNER or AUX on the remote). LOUDNESS ➜ The system will switch to the selected source. LOUDNESS feature enables the system to automatically increase th
