Résumé du contenu de la page N° 1
HELP LINE: 0870 100 2525
With queries, please quote the page number,
reference number and model number.
Résumé du contenu de la page N° 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclama
Résumé du contenu de la page N° 3
1. Cleaning Unplug the LCD TV from the AC power outlet before cleaning. Do not use liquid cleaner or aerosol cleaner. Use a soft and damp cloth for cleaning. 2. Attachments Do not use attachments not recommended by the LCD TV equipment manufacturer as they may result in the risk of fire, electronic shock or other injury. 3. Water and Moisture Do not place the LCD TV near water, for example:- near a bathtub, kitchen sink, laundry tub, in a wet basement or near a sw
Résumé du contenu de la page N° 4
Important Safeguards ………………………………………………………………………………... 1 Supplied Accessories ………………………………………………………………………………… 2 Functional Overview …………………………………………………………………………………. 3 … Connecting & powering up ……………………………………………………………………….. 4 … Connecting the LCD TV monitor ………………………………………………………………… 5 Preparation … Remote Controller ………………………………………………………………………………… 6 … Operation & Adjustment ………………………………………………………………………….. 7 … Connecting external equipment …………………………………………………………………
Résumé du contenu de la page N° 5
Location Heat, Moisture, Dust, Vibration Position your LCD TV so that bright light or sunlight doesn’t fall directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing. Ventilation Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Leave at least 10 cm around each side of the TV set.
Résumé du contenu de la page N° 6
Make sure that the following accessories are provided with the product. • Power Cord • Remote Controller + Batteries • Scart-to-Phono cable If any item is missing or damaged, please contact your dealer. Please keep the box and packaging materials so that you may properly store or transport your LCD Television. 2
Résumé du contenu de la page N° 7
• The LCD TV is designed for use in a small environment or for those who need more space. • The convenient and user-friendly on-screen display allows for easy and accurate adjustments of the various features. • The LCD TV complies with the VESA Display Data Channel (DDC) specification for Plug and Play compatibility. • The LCD TV features Advanced Colour Controls and fine-tuning to meet your own personal settings or application requirements. • PC MODE - use the on-screen
Résumé du contenu de la page N° 8
Connecting & Powering-up (PC MODE) 1 Turn off the computer and LCD TV 2 Connect a 15 pin signal cable (not supplied) to the output port of the video card in your computer and monitor 3 Tighten the screws of the 15 pin signal cable 4 Connect an audio cable (not supplied) to the output port of the sound card in your computer 5 Plug the power cord into the AC POWER port located on the back of the LCD TV 6 Plug the other end of the power cord into the
Résumé du contenu de la page N° 9
Connecting the LCD TV Aerial connection Connect an Aerial cable (75ohm coaxial cable) to the Aerial Terminal on the back of the LCD TV connection panel. 5
Résumé du contenu de la page N° 10
Remote Controller 1 Power - power the LCD TV on and off 2 Source - select the input mode (video, s-video, TV, PC) 3 PR [up] - channel select 4 Volume - adjust volume (sound) level 5 Menu - display main menu 6 Normal - recall preferred settings (Normal I, II, Favourite) 7 Sleep - set the Sleep Timer 8 OK - select menu items 9 Numerical buttons to select channels 10 Display - show the current program 11 Mute - disabl
Résumé du contenu de la page N° 11
Operation & Adjustment (Front Control Panel) 1 Power on / off Switches the LCD TV on and off (Standby mode) 2 Power indicator light Shows Green LED when in use 3 Volume adjust Adjusts volume up and after pressing MENU, adjusts menu settings 4 Volume adjust Adjusts volume down and after pressing MENU, adjusts menu settings 5 Source Selects input source and after pressing MENU sets menu functions 6 Menu Turns the OSD window on / Turns the OSD window off - and moves from sub menu to
Résumé du contenu de la page N° 12
Connecting external equipment Plug the connector for S-Video port [1] on the rear of the LCD TV and the other end into the device you are intending to connect (VCR, DVD etc.) Plug the Phono connectors for the Composite video / Sound inputs to the RCA ports [2] on the rear of the LCD TV and the other end to a Camcorder, VCR, DVD etc. Note: If you only have a Scart socket on your VCR or DVD then you will need to use the Scart-to-Phono connector (supplied). Plug the connect
Résumé du contenu de la page N° 13
Menu Installation Key Process for TV mode Press the MENU button on the Remote controller. This will bring up the OSD. Here, with INSTALL highlighted, you can make the changes necessary to configure the TV options available such as searching for channels, tuning channels, naming channels and editing those channels. The four directional arrows on the Remote will navigate the OSD. When making changes, a right-arrow movement will select it (changing it to RED) and subse
Résumé du contenu de la page N° 14
Menu Installation Key Process for TV mode Edit Channel To attach the names to each channel number and put them in the correct order, conduct the following procedure:- Press the MENU button and then press arrow-right (VOL+) once and then the down-PR button to select EDIT CHANNEL. Now press the OK button to bring up the edit screen (see pic). You will note that there are no channel names in the Edit list only programme numbers. To put names and numbers in the corre
Résumé du contenu de la page N° 15
Menu Installation Key Process for TV mode Manual Tuning To select manual tuning, press MENU, then VOL+, then down-PR, then OK. At this position set the SYSTEM to match country you are in. 1. press right-hand (VOL+), the Country will change RED, then again to select correct Country 2. press MENU to set 3. now, press down-PR and VOL+ to select programme numbers (PR, see pic) 4. press up- or down-PR to change programme number 5. press MENU (or OK) to set 6. pres
Résumé du contenu de la page N° 16
Menu Installation Key Process for TV mode Fine tune With the Preset channel running in the background, the signal can be fine-tuned. The detection process is however, accurate, but additional fine-tuning may improve the signal to your specific requirements depending on quality of the signal received. The default Fine-tune point is 0 so if adjusting this does not positively affect your TV signal, return it to 0 to effectively restore the original detection. Press t
Résumé du contenu de la page N° 17
Menu Installation Key Process for TV mode Press the MENU button on the Remote controller. This will bring up the OSD. SOUND can be turned on and off and the Volume can be adjusted. 13
Résumé du contenu de la page N° 18
Menu installation Key Process for PC mode Press the MENU button on the Remote controller. This will bring up the OSD. COLOUR configures the PC display to suite your requirements. GAMMA reflects the level of white against black and COLOUR TEMP is depedant on the amount of RGB (Red Green, Blue). 9300 is BLUE orientated, 6550 is RED orientated and USER is dependant on colour adjustment (but defaults to GREEN). Colour Adjust gives you the option of manually adjusti
Résumé du contenu de la page N° 19
Menu installation Key Process for PC mode Press the MENU button on the Remote controller. This will bring up the OSD. OSD MENU has a LANGUAGE OSD setting. Once highlighted, press OK. A selection of Languages are selectable: English, French, Dutch, Spain, Italian and Korean. OSD H POS and OSD V POS re-positions the OSD on the LCD display. OSD TIMER when ON, turns of the OSD in 15 seconds of inactivity. In an OFF state, the OSD will remain until the MENU button is pre
Résumé du contenu de la page N° 20
Attaching a Wall or Arm mounting device 1. Turn off the monitor and pull out the power cable. 2. Place the product on top of a soft cloth or other smooth material on the floor and move the LCD TV to a ‘face-down’ position making sure it is flat and balanced. 3. Detach the rear cover of the stand with a screwdriver. 4. Remove the four screws connecting the stand and the body. 5. The stand is now disassembled. Hole spacing: 100 x 100mm Screw length: 8~12mm This LCD
