Résumé du contenu de la page N° 1
20” LCD TV
DGL20
User’s Manual
Résumé du contenu de la page N° 2
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruct
Résumé du contenu de la page N° 3
10. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. 11. GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). Th
Résumé du contenu de la page N° 4
TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN HANDLING YOUR DISPLAY, PLEASE BE AWARE OF ALL WARNINGS AND SAFETY PRECAUTIONS CONTAINED BELOW. Never Insert anything into DISPLAY!! Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Display。 Do not attempt to service the DISPAY yourself!! Opening or removing covers may expose you to dangerous vol
Résumé du contenu de la page N° 5
CONFORMITY AND COMPLIANCE FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful in
Résumé du contenu de la page N° 6
ANTENNA CONNECTIONS If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV (CATV) see “CABLE TV CONNECTIONS”. Combination VHF/UHF Antenna (Single 75 Ohm cable or 300 Ohm twin-lead wire) Connect the 75 Ohm cable from the combination VHF/UHF antenna to the Antenna Jack. If your combination VHF/UHF antenna has a 300 Ohm twin-lead wire, the use of the 300-75 Ohm Matching Transformer may be necessary.
Résumé du contenu de la page N° 7
Table of contents Introduction Congratulations on the purchase of your LCD TV. This handbook has been designed to help you install and operate your display. We would recommend reading it thoroughly. Table of contents Pages Getting Started Features ……………………………………………………………………... 7 Standard accessories …………………………………………………….... 7 Location of controls …………….…………………………………………… 9 The remote control keys ……………………………………
Résumé du contenu de la page N° 8
Getting Started Features Features Features ˙Supports VGA resolution of 640x480 pixels ˙Digital Character Smoothing ˙Analog TV tuner ˙Windows 95/98/2000/XP Plug & Play Compliant ˙Versatile, User friendly OSD ˙Plug & Play: Conforms to VESA standards and supports DDC1/2B spec. Standard accessories Standard accessories Standard accessories Unpacking and checking package contents Before unpacking your LCD Display, prepare a stable, level, and clean surface near a
Résumé du contenu de la page N° 9
REMOTE CONTROL BATTERY INSTALLATION Slide the battery compartment cover. Install two “AAA” batteries (supplied), paying close attention to the + / - polarity diagram in the battery compartment. Replace the compartment cover. BATTERY PRECAUTIONS The precautions below should be followed when using batteries in this device: 1 Use only the size and type of batteries specified. 2 Be sure to follow the correct polarity when installing the batteries as i
Résumé du contenu de la page N° 10
Front View Getting Started Location of controls Location of controls Location of controls DVD LED indicator Green for operating PC monitor and TV system. Amber for PC power saving or no signal. Red when Power is on standby. Operating the monitor Front panel buttons： ① POWER：Press to activate the Display On and Off (standby). ② SOURCE：Press to display and cycle through all of the available input sources. ③ MENU：Press to see O
Résumé du contenu de la page N° 11
Rear View Getting Started REAR PANEL JACKS Side view Connect the coaxial cable or antenna. (If connectors do not match, ① ANT use adaptor included) ② YCbCr Audio Audio input terminal for connecting the YCbCr audio source. Connects to the component video output terminal of a video source ③ YcbCr Video such as: a DVD player, etc. Bottom view Audio input terminal for connecting the Left audio of an audio / ① L Audio In video source. Audio input terminal for connecting the Right audi
Résumé du contenu de la page N° 12
Getting Started The Remote control Keys The Remote control Keys The Remote control Keys Item Key Function 1 Power Power on / off 2 Number keys Select channel by numbers. 3 Enter Press to confirm selection after entering channel number 4 Menu Access menu / turn PBC on and off during VCD disc 5 CH Channel select 6 VOL Volume control 7 Enter Confirm the adjustment or the “selected” item. 8 V-chip Turn V-chip mode on and off. 9 Display Display current information. 10 Source Se
Résumé du contenu de la page N° 13
Installation Installing your display Installing your display Installing your display Step 1. Positioning the display set Place your TV Display set on a solid stable surface. Do not expose the display to water, or a heat Source. Do not obstruct the ventilation grid at rear. Step 2. Connecting the aerials 1. Use the RCA adaptor included to connect the Cable / Antenna to TV tuner socket situated at the side of the TV. 2. Conn
Résumé du contenu de la page N° 14
Installation Setup Setup Setup You’ll need to set a few important menu items the first time you turn on your Display. Step 1. Select the language and the country: This menu allows you to choose OSD (On Screen Display) language displayed and county. Menu-TV Language: Picture Audio - Press MENU (the main menu appears.), and select Input Select “Language” by pressing key, and press ENTER. TV Setup - Press / keys on the remote co
Résumé du contenu de la page N° 15
Remote Operation Basic operation Basic operation Basic operation Power on/off Power Press the “POWER’ key to turn on the Display. Source select Using remote control Source Press SOURCE to select the input signal. Each time the SOURCE button is pressed, the on-screen display will cycle between: Menu Volume TV AV S-VIDEO VGA Component (YCbCr) Channel Using menu control Press MENU to a
Résumé du contenu de la page N° 16
Operation OSD menu setting OSD menu setting OSD menu setting To access MENU, navigate and make adjustments, use MENU、 CH、 CH、 VOL、 VOL and ENTER keys. Pressing MENU key displays the OSD menu. Use CH、 CH on the remote control to scroll the options on the menu. Press “Enter” to select submenus, Use / to adjust the settings. Press “Enter” to confirm the setting. Press MENU to exit the current OSD page. The same main menu is displayed during all modes; TV,
Résumé du contenu de la page N° 17
Operation [ Picture Adjusting ] 1. Press MENU, select PICTURE and press ENTER. 2. Press “CH ” key to select BRIGHTNESS / CONTRAST / HUE / SATURATION / BLACK LEVEL, then press ENTER. Use VOL / VOL to adjust. In TV & Video mode Adjusting the picture setting: Picture Brightness Brightness: Alters the brightness Contrast Contrast: Alters the Contrast Hue Hue: Alters the color intensity. Saturation Saturation: Alters the color saturation. Black Level Black Level: Alt
Résumé du contenu de la page N° 18
Operation [ Audio Adjusting ] 1. Press MENU, select AUDIO and press ENTER. 2. Use the navigator / and / keys to select then press ENTER. In TV & Video & PC mode Adjusting the audio setting Audio Volume Volume: Adjusts volume. Mute Mute Mute: Mutes the sound. Off On Note: You can adjust volume by pressing VOL 、 VOL on the remote directly, and press “MUTE” on the remote directly to mute
Résumé du contenu de la page N° 19
Operation Other function setting Other function setting Other function setting Fine tune The proximity of mountains or high buildings may attribute to ghost pictures or shadows. In this case, try adjusting “fine tune” to obtain reception. 1. Press MENU and navigate to select “Fine Tune”, and press ENTER. 2. Press VOL or VOL to “Fine Tune” for best reception. Menu-TV Picture Audio Input Select TV Setup TV Setup System Mis
Résumé du contenu de la page N° 20
Operation Closed Caption Closed Caption Closed Caption Closed caption is a system which allows you to read the voice content of television programs on the TV screen to help the hearing impaired. This feature uses onscreen text boxes to show conversation and dialogue while the program is in progress. Usually C.C. 1 is the most used. C.C. 2 may be used for alternate languages. Text function is usually used for channel guide, schedules, bulletin board information for Closed Caption pro
