Résumé du contenu de la page N° 1
This product contains electrical or electronic materials. The presence of these materials may, if
not disposed of properly, have potential adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste
and must be collected separately. As a consumer, you are responsible for ensuring that this
product is disposed of properly. To find out how to properly dispose of this product, please go
to www.elementelectroni
Résumé du contenu de la page N° 2
ENGLISH ENGLISH FCC Federal Communications Commission Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
Résumé du contenu de la page N° 3
Warnings and Precautions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONN
Résumé du contenu de la page N° 4
ENGLISH ENGLISH Warnings and Precautions ▪ If you can not fit the plug into the electrical outlet, contact an electrician to install a grounding outlet. ▪ Always operate this equipment from the type of power source indicated on the rear of the serial/model plate. ▪ Never overload wall outlets and extensions. ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. ▪ Do not
Résumé du contenu de la page N° 5
Warnings and Precautions LISTENING WITH EARPHONES ▪ Listen at moderate Volumes to avoid hearing damage. ▪ If you hear no sound during playback, do not turn the Volume up as the music may suddenly begin at a high Volume. Excessive sound pressure from earphones and headphones can cause hearing loss. ▪ To avoid damaging your ears, adjust the Volume to the lowest level before playback, and turn up to the desired level when playback has started. Outdoor Antenna Safety Instructions If an outdoor a
Résumé du contenu de la page N° 6
ENGLISH ENGLISH TABLE OF CONTENTS Federal Communications Commission Statement .......................... 1 Warnings and Precautions Important Safety Instructions ....................................................................................... 2 Antenna Safety Instructions ......................................................................................... 4 Chapter Introducing the TV Key Features ................................................................................
Résumé du contenu de la page N° 7
Chapter Introducing the TV Chapter 1 Introducing the TV Key Features Multiple Audio/Video Inputs and Outputs for Easy, User-Friendly Connections ▪ 1 composite VIDEO input terminal ▪ 1 component Video input terminal ▪ 1 VGA and VGA Audio input terminal ▪ 1 HDMI input terminal (with built-in Audio) ▪ 1 Audio(L/R) input terminal for S-VIDEO ▪ 1 COAXIAL output terminal ▪ 1 Earphone terminal Built-in TV tuner to receive HD ATSC ▪ This function allows the reception of HD broadcasting without the
Résumé du contenu de la page N° 8
ENGLISH LIST FAV.CH Chapter Introducing the TV Package Contents Make sure all of the following contents are included. Remote Control/ TV AAA Batteries x 2 POWER S.MODE MTS P. MODE S.MODE MTS P.MODE CAPTION SLEEP P.SIZE CAPTION SLEEP P.SIZE 1 2 3 4 5 6 7 8 9 JUMP 0 MUTE MUTE VOL. CH. VOL. INPUT INPUT CH. GUIDE EXIT GUIDE EXIT OK INFO MENU INFO MENU LIST FAV.CH TIMER FREEZE Power Cord AC-DC Adapter User’s Manual Quick Start Guide Warranty Card The photos of the accessories are
Résumé du contenu de la page N° 9
Chapter Introducing the TV Setting Up Your TV How to install the TV Stand Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. The package contains: TV Stand Cover an even and stable surface with a soft cloth. Place the TV unit face-down on the cloth. Fit the stand onto the bottom of the TV unit as shown, then use a screw driver to tighten the screw on the bottom of the stand until the screw is firmly fixed in place.
Résumé du contenu de la page N° 10
ENGLISH Chapter Intr oducing the TV How to remove the TV Stand If you prefer to mount your new TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately). To prevent damaging the surface of the TV, place the TV on a soft cloth. Remove the screw of the table stand and detach the table stand from the TV. Affix the VESA standard mount to the back of the TV using the four screws provided in the wall-mount kit. W
Résumé du contenu de la page N° 11
Chapter Introducing the TV How to setup the TV Use a supplied antenna cable to connect the VHF/UHF signal to the TV’s ANT. terminal (refer to page14-18). Connect the AC power cord to the back of the TV and connect the power cord to the wall outlet. Insert the 2 batteries supplied in remote control. Step Slide the back cover up to open the battery compartment of the remote control. Step Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries w
Résumé du contenu de la page N° 12
ENGLISH Chapter Introducing the TV Your TV Front/Left /Right Side View and Controls Front View Right Side View Left Side View IR Infrared Receiver LED The LED light indicates when the TV is on. VOL+- Adjusts the volume up and down. Selects the main menu item and change values for items when in the OSD mode. CH▲▼ Scans up and down through channels. Selects sub-menu item when in the OSD mode. MENU Press once to display the OSD (on screen display), press again to turn the OSD off. INPUT
Résumé du contenu de la page N° 13
Chapter Intr oducing the TV Rear View and Jacks EARPHONE Connects to the external headphone for private listening. YPbPr IN //AUDIO(L/R) IN Connects to the DVD player, Digital Set-Top-Box, or other AV equipment with component(YPbPr) video and audio output jacks. HDMI IN Connects the all digital AV equipment with HDMI connector. CABlE/AIR DC IN Connect the power cord to the AC-DC adapter and wall outlet. VGA IN/AUDIO IN Connects the PC, or other AV equipment with VGA and line in jacks.
Résumé du contenu de la page N° 14
ENGLISH Chapter Introducing the TV Your Remote Control Turns the TV on and off. MTS Cycles through the multi-channels TV sound (MTS) options: SAP/MONO/ STEREO POWER S.MODE Selects sound effect options: Surround/ Live/Dance/Techno/Classic/Soft/Rock/ Pop/Off. S.MODE MTS P.MODE P.MODE Selects picture mode: Vivid/Hi-Bright/ CAPTION SLEEP P.SIZE Cinema/Sport/User P.SIZE Cycles through Wide mode settings : 1 2 3 NORMAL /FULL/WIDE/ZOOM 4 5 6 CAPTION Cycles thro
Résumé du contenu de la page N° 15
Chapter Installing the TV INPUT Pressing INPUT will display the source list, use ▲▼ to select the video POWER equipment connected to the video inputs of your TV and press OK to confirm: Input Source TV(CABLE/ANTENNA) S.MODE MTS P.MODE VIDEO1 (AV) VIDEO2 (YPbPr) VIDEO3 (HDMI) CAPTION SLEEP P.SIZE COMPUTER(VGA) 1 2 3 GUIDE Displays the Program Guide on the screen. Press again to turn GUIDE off. 4 5 6 EXIT Exits the OSD menu. 7 8 9 ▲▼►◄ Cycles through OSD options and
Résumé du contenu de la page N° 16
ENGLISH Chapter Installing the TV Chapter 2 Installing the TV Refer to the owner’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is stron
Résumé du contenu de la page N° 17
Chapter Installing the TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF Antenna 300-ohm twin- lead cable 75-ohm coaxial cable B. Separate VHF and/or UHF antennas UHF Antenna Combiner 300-ohm twin- (not included) lead cable OUT IN 75-ohm VHF coaxial cable A
Résumé du contenu de la page N° 18
ENGLISH Chapter Installing the TV Cable TV (CATV) Connection This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than private viewing of programs broadcasted on UHF, VHF
Résumé du contenu de la page N° 19
Chapter Installing the TV Use a supplied antenna cable to connect the TV signal to the TV’s TV CABLE terminal. VHF/UHF IN Connect the DC plug of the AC-DC adapter to the DC 12V port at the back of the TV. Connect the AC-DC adapter and its power cord. Connect the power cord to wall outlet. Press the button on the remote to turn on the TV. Always disconnect the TV from the main voltage when the TV will not be used for a long period of time. The POWER button on the front panel is o
Résumé du contenu de la page N° 20
ENGLISH Chapter Installing the TV Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select TV. TV Channel Scan Tuner Mode Cable Channel Skip Favorite List Time Zome Eastern Time Enter Select Exit Pressthe ▼ button to select Channel Scan, and press the OK button. The Channel Scan automatically creates a list of receivable channels. Press the MENU button at any time to interrupt the memorization process (The list will not be creat
