Résumé du contenu de la page N° 1
Installation and
Operating Guide
26LH1DC3
26LH1DC4
26LH1DC5
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.
www.lgcommercial.com
Résumé du contenu de la page N° 2
WARNING / CAUTION NOTE TO CABLE TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, CAUTION: as close to the point of the cable entry as practical. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSI
Résumé du contenu de la page N° 3
CAUTION WARNING Do not attempt to modify this product in any way Apparatus shall not be exposed to dripping or without written authorization from LG Electronics splashing and no objects filled with liquids, such as Corporation. vases, shall not be placed on the apparatus. Unauthorized modification could void the user’s authority to operate this product. CAUTION When used outside of the U.S., it may be used HAR CAUTION cord with fitting of an approved agency is employed. (When used outside of U
Résumé du contenu de la page N° 4
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety
Résumé du contenu de la page N° 5
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PARENTAL CONTROL/RATINGS SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . 4 Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Movie & TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 SOUND & LANGUAGE CONTROL PREPARATION Cap
Résumé du contenu de la page N° 6
PREPARATION PREPARATION ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables with ferrite cores to maintain standard compliance for the product. MUTE POWER CH TV/AV PREVIEW GUIDE SAP INFO CC CH OK VOL VOL CH 123 456 7 89 FLASHBK - 0 TIMER ALARM Owner’s Manual CD Manual User Remote Control. Installer Remote Control. Batteries Batteries
Résumé du contenu de la page N° 7
PREPARATION FRONT PANEL INFORMATION ■ Here shown may be somewhat different from your TV. ■ Using the front control panel to operate the TV. Front Panel Controls Power / Standby Indicator Glows red in Standby mode. Glows green when the TV is turned on. Glows orange in Sleep Timer and/or Alarm mode. / I Remote Control Sensor TV Operation A Press the P PO OW WE ER R button to turn the TV on from standby mode. Press M ME EN NU U repeatedly to scroll through B menus. / I NOTE With Installer menu
Résumé du contenu de la page N° 8
VIDEO2(SIDE AUTO-CAMPORT) VIDEO IN AUDIO IN LR PREPARATION PREPARATION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV. Back Connection Panel AUDIO/ VIDEO 2 (SIDE AUTO- CAMPORT) AUDIO / VIDEO 1, 3 IN Connect Audio / Video equipment to these jacks. RS-232C SELECT SWITCH UPDATE SWITCH M.P.I. INTERFACE RS-232C PORT COMPONENT 1, 2 IN Use with clone programmer. S-VIDEO IN AC IN FUTURE USE DIGITAL AUDIO OUT (Optical) PC IN ANTENNA CABLE RJP INTERFACE Connect to an antenna or
Résumé du contenu de la page N° 9
PREPARATION VESA WALL MAUNTING ■ Here shown may be somewhat different from your TV. There are several Vesa standard mounts available that can be used with this TV. The mount shown to the right would be installed on the TV back using required bolts in the four pre-threaded holes provided. Follow any instructions supplied with the Vesa mount if one is to be used for the TV installation. Vesa Standard Typical Mounting Holes Vesa Mount TV Swivel Stand Swivel Stand - The TV can be conveniently swivel
Résumé du contenu de la page N° 10
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) Antenna Socket RF Coaxial Wire (75 ohm) Outdoor Antenna Single-family Dwellings /Houses (VHF, UHF) Copper Wire (Connect to wall jack for outdoor antenna) Be careful not to bend the
Résumé du contenu de la page N° 11
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting Component cable 1. How to connect Connect the video outputs (Y, PB, PR) of the digital se
Résumé du contenu de la page N° 12
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect Connect the digital set-top box to H HD DM MII/ /D DV VII IIN N jack on 1 the set. No separated audio connection is necessary. 2 HDMI supports both audio and video. 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 1 ■ Select H HD DM MII input source by using the T TV V/ /A AV V button on the remote control. NOTE When connected, the TV wil
Résumé du contenu de la page N° 13
EXTERNAL EQUIPMENT SETUP When connec When connecting HDMI t ting HDMI to o D DVI cable VI cable 1. How to connect Connect the DVI output of the digital set-top box to the 1 H HD DM MII/ /D DV VII IIN N jack on the set. Connect the audio output of the digital set-top box to 2 the D DV VII/ /P PC C A AU UD DIIO O IIN N jack on the set. 1 2. How to use 2 ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select H HD DM MII input source by using the
Résumé du contenu de la page N° 14
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to 1 the C CO OM MP PO ON NE EN NT T( (D DV VD D/ /D DT TV V) )1 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the 2 C CO OM MP PO ON NE EN NT T( (D DV VD D/ /D DT TV V) )1 1 jacks on the set. 2. How to use 1 2 ■ Turn on the DVD player, insert a DVD. ■ Select C Co
Résumé du contenu de la page N° 15
EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect Connect the S-VIDEO output of the VCR to the 1 S S- -V VIID DE EO O input on the set. Connect the audio outputs of the VCR to the A AU UD DIIO O 2 input jacks on the set. 2 3 When connecting HDMI cable 1. How to connect Connect the HDMI output of the DVD to the 1 H HD DM MII/ /D DV VII IIN N jack on the set. No separated audio connection is necessary. 2 HDMI supports both audio and video. 2. How to use ■ Select H
Résumé du contenu de la page N° 16
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP VCR SETUP ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. When connecting with an antenna 1. How to connect Connect the RF antenna out socket of the
Résumé du contenu de la page N° 17
EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable 1. How to connect Connect the V VIID DE EO O1 1 jacks between TV and VCR. Match 1 the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 1 2. How to use ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ■ Select A A V V 1 1 input source by using the T TV V/ /A AV V button on the remote control. ■ If connected to V VIID DE EO O3 3, select A A V V 3 3 input source. When
Résumé du contenu de la page N° 18
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP ex) TV Model 1. How to connect Connect the V VIID DE EO O2 2 jacks between 1 TV and external equipment. Match the Video Game Set jack colors. 1 (Video = yellow, Audio Left = white, and Audio Right = red) Camcorder 2. How to use ■ Select A A V V 2 2 input source by using the T TV V/ /A AV V button on the remote control. ■ Operate the corresponding external equipment. DIGITAL AUDIO OUTPUT ■ Send the TV’s audio to external au
Résumé du contenu de la page N° 19
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable 1. How to connect Connect the RGB output of the PC to the P PC C IIN N jack 1 on the set. Connect the PC audio output to the D DV VII/ /P PC C A AU UD DIIO O 2 IIN N jack on the set. 2 2. How to use 1 ■ Turn on the PC and the TV. ■ Select P PC C input source by using the T TV V/ /A AV V button on the remote control. W
Résumé du contenu de la page N° 20
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP NOTE To get the the best picture quality, adjust the PC VIDEO menu until the picture is clear. If the G graphics card to 1024x768, 60Hz. refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult Depending on the graphics card, DOS mode may G the manufacturer of the PC graphic card. not work if a HDMI to DVI Cable is in use. Avoid keeping a fixed image on the screen for a G Check the image on your TV. There may
