Résumé du contenu de la page N° 1
LCD
Color Television
OWNER’S MANUAL
MODELS : RU-17LZ20/21/22
RU-23LZ20/21/22
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Internet Home Page : http://www.lge.com
Résumé du contenu de la page N° 2
Warning Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.
Résumé du contenu de la page N° 3
Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec- trical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple preca
Résumé du contenu de la page N° 4
Safety Instructions Safety Instructions continued Safety Instructions continued 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards. Refer all servicing to qualified service per- built-up static charges
Résumé du contenu de la page N° 5
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Time Menu Options Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .21 Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .21 Introduction On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .22 Controls and Connection Options . . . . . . . . . .6~7 Sleep Timer Setup . . . . . .
Résumé du contenu de la page N° 6
S-VIDEO VIDEO IN 2 L / MONO AUDIO R Introduction Introduction Introduction RU-17LZ20/21/22 Controls & Connection Options RU-17LZ20/21/22 Controls & Connection Options Menu Button Channel Button Enter Button TV/Video Button Volume Button On/Off Button on/off tv/video menu enter vol ch ST R SAP MONO DPM STEREO SAP Indicator Mono Indicator Stereo Indicator DPM Indicator Power/Standby Indicator Glows red in Standby mode, Glows green when the TV is turned on. Remote Control Sensor Headphone Jack S-
Résumé du contenu de la page N° 7
ch vol enter menu tv video / I on/off Introduction RU-23LZ20/21/22 Controls & Connection Options RU-23LZ20/21/22 Controls & Connection Options Channel Buttons Volume Buttons Enter Button ST R MONO SAP DPM STEREO Menu Button TV·Video Button SAP Indicator Mono Indicator Stereo Indicator DPM Indicator On/Off Button Power/Standby Indicator Glows red in Standby mode, Glows green when the TV is turned on. Remote Control Sensor Headphone Jack S-Video Input Video Input * Kensington Security System Conne
Résumé du contenu de la page N° 8
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MUTE MULTIMEDIA Switches the sound on or off. Selects: TV, Component, or RGB-PC mode. TV/VIDEO mute power Selects: TV, Video 1, Video 2, S-Video, Component, or POWER tv/video multimedia mts RGB-PC mode. fcr exit menu FCR MTS (Refer to p.16) (Refer to p.20) MENU ch enter EXIT vol vol ENTER ch CH (Channel button) D / E 123 VOL F / G (Volume button)
Résumé du contenu de la page N° 9
Installation Installation Installation mute power tv/video multimedia mts fcr exit menu Accessories Accessories ch enter vol vol ch 123 456 789 audio video 0 arc pip cc position pip input flashbk size pip swap sleep still scan ch 1.5V Operating Guide AAA Batteries AC Adapter Remote Control (RU-17LZ20/21/22 Only) PC Sound Cable PC Signal Cable Power Cord Tie Bands - Arrange the wires with the tie bands. Power Connections (RU-17LZ20/21/22 Only) Power Connections (RU-17LZ20/21/22 Only) * Caution:
Résumé du contenu de la page N° 10
12 Installation Installation Instruction Installation Instruction Rear Rear A/V Cover A/V Cover W Wire Holders ire Holders * The connection panel is hidden behind the A/V cover. - Thread, then pull the wires through the hole on the TV a. Remove the cover. stand. b. Install wires as necessary. c. Reinstall the cover. Position the A/V cover with the TV back panel, tilt it back as shown. d. Align the holes on the TV back panel with the two tabs on the rear A/V cover and insert. e. Close cover. Adju
Résumé du contenu de la page N° 11
Installation External Equipment Connections External Equipment Connections - This manual mainly explains the features for the RU-17LZ20/21/22. Antenna Connection Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten. PC INPUT ANT IN Bronze
Résumé du contenu de la page N° 12
Installation External Equipment Connections Continued External Equipment Connections Continued VCR Setup VCR Setup - In Video mode, TV automatically reverts to TV mode if the fcr button or flashbk buttons are pressed. Connection 1 PC PC INPUT ANT IN L Y PB PR LR VIDEO (MONO) AUDIO R SOUND +75 Ω COMPONENT(480i/480p/720p/1080i) AUDIO VIDEO IN Set VCR switch to 3 or 4 and then tune TV to the same DVD/DTV IN channel number. Connection 2 Typical 2 Antennas 1. Connect the audio/video output jacks on
Résumé du contenu de la page N° 13
IN 2 S-VIDEO VIDEO L / MONO AUDIO R Installation DVD Setup DVD Setup Connections Connect the DVD video outputs to the COMPONENT (Y, PB, PR) jacks and connect the DVD audio outputs to the AUDIO jacks. PC PC INPUT ANT IN L Y PB PR LR VIDEO (MONO) AUDIO R SOUND +75 Ω COMPONENT(480i/480p/720p/1080i) AUDIO VIDEO IN Viewing Setup DVD/DTV IN 1. Turn on the DVD player, insert a DVD. 2. Use the tv/video or multimedia button on the remote control to select Component. 3. Refer to the DVD player's manual
Résumé du contenu de la page N° 14
Installation PC Setup PC Setup - After setup, be sure to select RGB-PC source on TV. Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2. Connect the TV to the PC with the PC cable. PC PC INPUT ANT IN VIDEO (MONO) L AUDIO R SOUND +75 Ω VIDEO IN 3. Connect the PC audio output to the TV's PC SOUND input. Viewing Setup 1. Turn on the PC. 2. Use the tv/video or multimedia button on the remote control to select RGB-PC. Monitor Display Specifications Horizontal
Résumé du contenu de la page N° 15
Operation Operation Operation TV Operation Overview TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode. • In standby mode, press the power, ch ( ), tv/video, multimedia or number button on the remote con- D,E trol or on/off, ch (D,E), tv/video located on the TV to turn the TV on. 2. Select the viewing source by pressing tv/video or multimedia repeatedly. •
Résumé du contenu de la page N° 16
Operation Channel Menu Options Channel Menu Options Memorizing the Channels with EZ Scan Memorizing the Channels with EZ Scan - For EZ scan to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. 1. Press the menu button and then use button to select the Channel D / E Channel menu. EZ Scan To start Ch.edit 2. Press the G button and then use button to select EZ Scan. D / E Favorite ch.
Résumé du contenu de la page N° 17
Operation Picture Menu Options Picture Menu Options EZ V EZ Video ideo - This function adjusts the TV for the best picture appearance. 1. Press the video button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User • You can also adjust EZ Video in the Picture menu. • Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed. Manual Picture Control (User option) Manual Picture Control ( option) - You can adjust pi
Résumé du contenu de la page N° 18
Operation Picture Menu Options Continued Picture Menu Options Continued Manual Color Manual Color T Temperature Control ( emperature Control (User option) option) - You can adjust red, green, or blue to any color temperature you prefer. 1. Press the menu button and then use button to select the Picture D / E Picture menu. EZ Video User Red 50 ACC User Green 50 2. Press the G button and then use D / E button to select ACC . DRP Clear Blue 50 3. Press the enter button and then use button to selec
Résumé du contenu de la page N° 19
Operation Sound Menu Options Sound Menu Options EZ Audio EZ Audio - This function lets you enjoy the best sound without any special adjustment because the TV selects the appro- priate sound option based on the program content. 1. Use the audio button to select the appropriate sound setup as shown below. Virtual Flat Music Movie Sports User • You can also adjust EZ Audio in the Sound menu. • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolb
Résumé du contenu de la page N° 20
Operation Sound Menu Options Continued Sound Menu Options Continued Sound selection in PC mode Sound selection in PC mode - Be sure to select the RGB-PC source and turn on the PIP before operation. 1. Press the menu button and then use button to select the Sound Sound D / E menu. EZ Audio Flat Balance 0 2. Press the G button and then use button to choose Sound select. D / E AVL Off Sound select RGB-PC 3. Use the F / G button to select desired screen sound (RGB-PC or PIP). 4. Press the exit bu
