Résumé du contenu de la page N° 1
LC-20B6U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
®
Products that have earned the ENERGY STAR are designed to protect the environment
through superior energy efficiency.
PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH
Résumé du contenu de la page N° 2
LC-20B6U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Serial No.: U.S.A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, CAUTION within an equilateral triangle, is intended to alert the
Résumé du contenu de la page N° 3
IMPORTANT INFORMATION (Continued) CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING AC
Résumé du contenu de la page N° 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. Ho
Résumé du contenu de la page N° 5
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. ■ Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. ■ Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product
Résumé du contenu de la page N° 6
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connect
Résumé du contenu de la page N° 7
Contents IMPORTANT INFORMATION ............................................ 1 SLEEP TIMER ............................................................ 37 Trademark ......................................................................... 2 WAKE-UP TIMER ....................................................... 38 DEAR SHARP CUSTOMER .............................................. 3 NO SIGNAL OFF ....................................................... 38 IMPORTANT SAFETY PRECAUTIONS ................
Résumé du contenu de la page N° 8
Supplied Accessories Make sure the following accessories are provided with the LCD TV set. Wireless remote control AC adapter pages 8 and 13 page 10 RRMCGA293WJSA UADP-A065WJPZ RGB cable AC cord Antenna cable page 10 page 9 page 40 QACCDA037WJPA QCNWG0003CEPA QCNWGA050WJPZ “AAA” size batteries (×2) Cable holder Operation manual LC-20B6U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE page 12 CRISTAL LÍQUIDO TELEVISOR DE CRISTAL LÍQUIDO LHLDWA037WJSA OPERATION MANUAL MODE D’EMP
Résumé du contenu de la page N° 9
Preparation Installing Batteries in the Remote Control Before using the LCD TV set for the first time, install the two “AAA” size batteries supplied in the remote control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert two “AAA” size batteries. 3 Close the battery cover. + – ■ Slide the cover while ■ Place batteries with their ■ Engaging the lower pressing the ( ) part. terminals
Résumé du contenu de la page N° 10
Preparation (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal
Résumé du contenu de la page N° 11
Preparation (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is
Résumé du contenu de la page N° 12
Part Names of Main Unit Controls Upper control panel VOL (Volume) MENU MAIN POWER (–)/(+) CH (Channel) INPUT ( )/( ) To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The LCD TV set can also be rotated up to 25 degrees to right and left. Please adjust the angle so that the LCD TV set can be
Résumé du contenu de la page N° 13
Part Names of Main Unit (Continued) Terminals Rear View Carrying handle PR ANALOG RGB PB Y/VIDEO PC-IN COMPONENT2/AV1 AUDIO (L) AUDIO AUDIO (R) VIDEO S-VIDEO AUDIO (L) AV-IN2/OUT AUDIO (R) Y PB ANT. (Antenna terminal) PR COMPONENT1 AUDIO (L) POWER INPUT AUDIO (R) (DC 12V) How to Fix the Cables • Pull the cables connected to each terminal through the holes and close the left and right terminal covers. Push the cables into the grooves of the support cover. Insert the cable holder (supplied) from a
Résumé du contenu de la page N° 14
Part Names of Remote Control POWER (p. 17) DISPLAY Switches the Liquid Crystal Displays the receiving channel and Television power on or off. the current time for 10 seconds. PIC. FLIP (p. 39) AV MODE (p. 21) Sets the orientation of the picture. Selects preferred AV MODE. BACKLIGHT (p. 22) SLEEP (p. 37) Adjusts the brightness of the screen. Sets the sleep timer. ' /" /\/| (Cursor control) (p. 19) ENTER Selects a desired item on the screen. Executes a command. MENU (p. 19) MENU RETURN (p. 19) Dis
Résumé du contenu de la page N° 15
EZ SETUP (With AUTO CLOCK Setting) Press ENTER to access START EZ SETUP mode. 4 EZ SETUP during the First Power On Press '/" to select “YES”, and press ENTER. ■ When you turn on the TV for the first time, it will automati- A cally memorize the broadcasting channels and clock. • If you want to stop the EZ SETUP process once it has started, Please perform the following instructions before you press press MENU and it will be canceled. If you want to set up again, MAIN POWER. please refer to pages 2
Résumé du contenu de la page N° 16
Setting the CLOCK AUTO CLOCK Setting ● If you do not know the channel that carries EDS signals in your area, select “EDS CH” to “AUTO” and press ENTER. If you know There are two methods of setting the clock: AUTO CLOCK the channel of the EDS signal carrier in your area, press c/d to and MANUAL CLOCK. AUTO CLOCK uses EDS signals, select channel and press ENTER. Set the EDS CH and press which are provided by some TV stations, to automatically ENTER. adjust the clock. MANUAL CLOCK sets the clock ma
Résumé du contenu de la page N° 17
Setting the CLOCK (Continued) Daylight Saving Time (DST) Adjustment MANUAL CLOCK Setting The Daylight Saving-Time changes as shown below, set the DST to “ON” to forward the clock by 1 hour. To rewind the If there are no channels with EDS signals, set the clock clock by 1 hour, set the DST to “OFF”. manually using MANUAL CLOCK. (Spring) On the first Sunday in April DST starts. 1:00AM 2:00AM Advances 1 hour. 3:00AM 4:00AM (Autumn) On the last Sunday in October DST finishes. 1:00AM 2:00AM Rewinds 1
Résumé du contenu de la page N° 18
Basic Operation Turning On and Off the Main Power Switching the Input Modes (AV1/AV2/ COMPONENT/PC/TV) MAIN POWER Turn on the power of the connected video equipment. 1 2 Press INPUT to select the applicable input source. The screen changes in order of COMPONENT1, COMPONENT2 or AV1, AV2, PC and TV mode each time INPUT is pressed. COMPONENT1 mode CONPONENT1 POWER/WAKE UP TIMER indicator 480P ● Press MAIN POWER. The POWER/WAKE UP TIMER indicator instantly changes from red to green and the LCD TV se
Résumé du contenu de la page N° 19
Basic Operation (Continued) Sound Volume Changing Channels ■ To adjust the volume You can select channels using Channel Select or CH ( )/( ). ● Press VOL (+) to increase the sound volume. • This LCD TV set allows you to select up to 125 channels The bar indicator shifts right. (1 to 125). To select a channel, enter a 2- or 3-digit number. VOLUME ■ Using Channel Select 50 When selecting the channel using Channel Select, complete ● Press VOL (–) to decrease the sound volume. input of the channel
Résumé du contenu de la page N° 20
Basic Operation (Continued) Selecting Menu Items The menus can be used to adjust the various settings of your LCD TV set. Select the desired menu item by following the steps below. See the next page for each Menu screen. A • The items displayed differ depending on the setting conditions. • The item selected is displayed in yellow. • Settings most recently adjusted will be saved in memory. ■ Using menus ■ Using direct control menu Control panel of the main unit INPUT VOL (–)/(+) MENU (Volume ) CH
