Résumé du contenu de la page N° 1
INTRODUCTION TO GPS
WITH 3M™ DYNATEL™
M-SERIES LOCATORS
Track & Trace Solutions
November 2007
78-8135-3403-5 Rev C
Résumé du contenu de la page N° 2
Table of Contents What is GPS? ......................................................................................................3 How does GPS Work? ........................................................................................3 Mapping with GPS ..............................................................................................3 GPS Technology ............................................................................................................. 3 Mapping of
Résumé du contenu de la page N° 3
What is GPS? The Global Positioning System (GPS) is a worldwide radio-navigation system formed from a constellation of 24 satellites and their ground stations. A GPS receiver uses these satellites as reference points to calculate positions accurately. How does GPS Work? The basis of GPS is "triangulation" from satellites. To "triangulate," a GPS receiver measures distance using the travel time of radio signals. To measure travel time, GPS needs very accurate timing. Along with dist
Résumé du contenu de la page N° 4
Activating GPS Modes Getting the Activation Code The GPS interface feature is available for no cost. The software upgrade and activation key can be obtained from the website http://www.3m.com/dynatel. Upgrade the software in your unit using PC Tools, then input the activation code. Inputting the Activation Code 1. Press the Menu key, then Setup, then >>More until COM softkey is visible. 2. Press the COM key and then select GIS mode. You will be prompted to input the activation key
Résumé du contenu de la page N° 5
The Locator supports three modes – NMEA, GIS, PDA. The mode can be set from within the Locator menu. Please refer to the section named “Dynatel setup”. Mode 1 Operation – NMEA mode Most GPS devices with a serial output can be configured to output the latitude and longitude data according to the NMEA (National Marine Electronics Association) standard. When an iD marker is read, the GPS data is stored with the marker's data in the Read or Program History memory on the 3M™ Dynatel™ Locato
Résumé du contenu de la page N° 6
Logging is supported from different modes within the Locator. Data is logged when an iD marker is read or programmed and when exiting the Cable / Sonde depth mode. If a non-RFID marker is attempted to be read, the data is also processed and saved by the GPS device. In GIS mode, whether you use the 3M™ ArcPad™ scripts, or Thales™ MobileMapper™ Pro, the data records sent from the Locator are used to create different layers on the map based on the record type “description.” This unique f
Résumé du contenu de la page N° 7
Therefore, if this feature is to be of the greatest value, care should be taken in the development of user data templates (Templates can be created and edited using the 3M™ Dynatel™ PC Tools software application), and distributed to iD marker programmers. Interface to ESRI™ ArcPad™: Many GPS devices support the Arcpad™ application for mapping. 3M™ has developed application scripts that runs in Arcpad™ providing a seamless interface with the 3M™ Dynatel™ M-series Locators for automatic
Résumé du contenu de la page N° 8
3M™ Dynatel™ Locator Setup 1. Press the Menu key, then Setup, then >>More until COM softkey is visible. 2. Press the COM key. A new screen appears. See figure below. 3. Select the GPS mode based on your requirements and the GPS device used. GIS mode (mode 2) is preferred as it is more integrated with the GPS device. In this mode, Arcpad scripts can be run on the GPS device for logging applications. 4. When GIS or PDA mode is selected, the user can select option to “Log Prompt” Yes / N
Résumé du contenu de la page N° 9
GPS/3M™ Dynatel™ Locator Operation Logging is supported in three operating modes of the Locator – iD marker read, iD marker program, Trace / path / cable locate modes. 1. Turn on 3M™ Dynatel™ M-series Locator. Press Locate/OK and select the marker locate mode. If the GPS unit is disconnected or has not acquired enough satellites to give a position, the 3M™ Dynatel™ Locator will display "Insert External Device". After the GPS unit has acquired a position, the 3M™ Dynatel™ Locator wi
Résumé du contenu de la page N° 10
Figure 5. Trace/path marking in GIS mode The data is transmitted at 4800 baud, 8 bits, 1 – stop bit, no – parity, flow control - none. 10
Résumé du contenu de la page N° 11
Installing and running 3M™ ArcPad™ application scripts Using Trimble™ GeoXT™ and Thales™ MobileMapper™ CE.NET ArcPad™ is a stand-alone application that runs on the GPS device. Many GPS devices including Trimble™ GeoXT™, Thales™ MobileMapper™ CE.NET support ArcPad™. 3M™ provides the application scripts that would need to be installed on the GPS device. These scripts provide interface to the 3M™ Dynatel™ Locator and the ArcPad™ application / GPS device. The scripts are designed to pro
Résumé du contenu de la page N° 12
Once ActiveSync recognizes the device, Click on “Explore” button to open Explorer. For details on how to download and install MS ActiveSync, please visit, http://www.microsoft.com/windowsmobile/activesync/default.mspx The Applets folder in the Arcpad™ has to be identified first. This directory is typically in “Program Files/Arcpad” path. However, if the default directory is not used, for example, SD card etc, the path could be different. The Applets folder is where the Arcpad.exe exist
Résumé du contenu de la page N° 13
The COM port to communicate with the Locator is configured in the “AUX” setting in the Arcpad™ Tools menu. Arcpad™ also needs to communicate with the GPS module / connector internally in the GPS device. Arcpad™ application has a setting in the ”GPS Preferences” for selecting the COM port and the associated properties for this setting. Please refer to the GPS device manufacturer’s manual for more information. First step: Ensure that the COM ports are configured properly in ArcPad™ in t
Résumé du contenu de la page N° 14
Next, configure the Auxiliary port. 1. Click on the Tool Box Icon drop arrow. 2. Select Options. 3. Click Right arrow until AUX tab appears in the bottom of the screen. 4. Click AUX. Set port COM port as shown. Figure 8. Selecting GPS COM port in ArcPad™ Application You will need to configure the Bluetooth™ adapters if you are using Bluetooth™ serial port communication in your environment. Several third party Bluetooth™ serial port adap
Résumé du contenu de la page N° 15
Again, the very important part in making the GPS device to communicate with the Locator is to configure the serial ports correctly. Once all the connections are established, you can verify the connectivity as follows. Start the Job by clicking on the Locator-man Icon in Arcpad™ application Locator-man Icon on the Toolbar Figure 10. Starting 3M™ Application scripts in ArcPad™ 3M Application scripts for ArcPad provide Job management capabilities. When you start the
Résumé du contenu de la page N° 16
Configure the Locator. Please refer to the section “3M™ Dynatel™ Locator Setup” for more details. Go to the Marker Locate mode in the Locator. Latitude and Longitude Coordinates should now appear on the Receiver Screen in Marker Locate or Cable Locate/Trace path mode in the Log template screen after the Depth screen. Now, if you read an iD marker you should see the marker record passed on to the GPS device and logged. You can also verify it from the Cable locate / Trace path dept
Résumé du contenu de la page N° 17
Using Thales™ MobileMapper™ PRO The Thales™ MobileMapper™ can be used in Mode 1 (NMEA) and Mode 2 (GIS) operations simultaneously. Your 3M™ Dynatel™ M-series Locator may need a hardware upgrade to be used with the Thales™ MobileMapper™ in Mode 2 (GIS) operation (See 3M™ Dynatel™ Locator setup below). Thales™ MobileMapper™ PRO Setup For mode 2 operation, it is recommended that a new feature library entry be TM created in MobileMapper Office and downloaded to the MobileMapper™ d
Résumé du contenu de la page N° 18
Please refer to the section “3M™ Dynatel™ Locator setup” for details on setting up the Locator. Thales™ MobileMapper™ / Dynatel™ Hookup 1. Secure the “null” modem adapter to the 3M™ Dynatel™ Locator serial port connector. 2. Connect the MobileMapper™ to the null modem adapter using the cable supplied with the MobileMapper™. The users are encouraged to use third party accessories including null modem, custom cable and mounting bracket are available (example: Igage Mapping Corpn,
Résumé du contenu de la page N° 19
5. Turn on the 3M™ Dynatel™ M-series Locator and go to the Marker locate mode. If the GPS unit is disconnected or has not acquired enough satellites to give a position, the 3M™ Dynatel™ Locator will display "Insert External Device". After the GPS unit has acquired a position, the 3M™ Dynatel™ Locator will display the latitude and longitude coordinates. 6. When a marker has been located, wait 10 seconds for the Thales™ unit to acquire and average positional data, then press the Read ke
Résumé du contenu de la page N° 20
Using an Unspecified GPS Device Most GPS devices with a serial output can be configured to output the latitude and longitude data according to the NMEA (National Marine Electronics Association) standard. These devices can be used in the Mode 1 operation (See 3M™ Dynatel™ GPS Modes, Mode 1 NMEA Operation). However if the GPS device supports Arcpad™ application, 3M™ Arcpad™ scripts can be used to interface with the Locator. GPS Device Setup Select NMEA and baud rate of 4800. On the G
