Instruction d'utilisation DSC POWERSERIES PC1616

Instruction d'utilisation pour le dispositif DSC POWERSERIES PC1616

Dispositif: DSC POWERSERIES PC1616
Catégorie: Système domestique de protection
Fabricant: DSC
Dimension: 0.76 MB
Date d'addition: 5/9/2013
Nombre des pages: 16
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif DSC POWERSERIES PC1616. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec DSC POWERSERIES PC1616.

Pour votre confort

Si regarder l'instruction DSC POWERSERIES PC1616 directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction DSC POWERSERIES PC1616 en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction DSC POWERSERIES PC1616 sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
DSC POWERSERIES PC1616 Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 16 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction DSC POWERSERIES PC1616 - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de DSC POWERSERIES PC1616. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

PC1616/PC1832/PC1864 STANDARD INSTALLATION GUIDE
This Installation Guide provides the basic installation, wiring and programming information required to program the PowerSeries PC1616,
PC1832 and PC1864 control panels. This guide shall be used in conjunction with the PowerSeries PC1616/1832/1864 Reference Manual
which can be obtained from your local dealer or downloaded from the DSC web site at www.dsc.com.
NOTE: All necessary information required to meet UL Listing requirements is contained

Résumé du contenu de la page N° 2

Hardware Installation Begin the installation by mounting the cabinet in a dry protected area with access to unswitched AC power. Install Hardware in the sequence indicated below. Do NOT apply power until installation is complete. NOTE: All wiring entry points are designated by arrows. All circuits are classified UL power limited except for the battery leads. Minimum 1/4” (6.4mm) separation must be maintained at all points between power limited and non-power limited wiring and connections. 1. K

Résumé du contenu de la page N° 3

Hardware Installation (Cont.) North America Only POWER LIMITED Stand Off PC Board 1. Insert Stand off into cabinet mounting hole in the Cable Tie (not supplied) recommended desired location. Snap-in- place. Cabinet 2. Position circuit board mounting holes over UA503 DSC standoffs. Press firmly Primary:120VAC/60Hz. Secondary: 16.5VDC 40VA on board to snap-in-place. PC1616/1832/1864 DSCPTD 1640U Class II Transformer WARNING: NOTE: Do not connect High Voltage. Disconnect AC Power transformer to rec

Résumé du contenu de la page N° 4

Hardware Installation (Cont.) 4. AUX Power Wiring The control panel can provide a maximum of 700mA of current for modules, powered detectors, relays, LED’s etc.… If the total current required exceeds 700mA an additional power supply is required (e.g.,PC5200, PC5204). See list below. NOTE: Min/max operating voltages for devices, sensors and modules is 9.5VDC - 14VDC Refer to the list of Compatible Devices on the first page for the current draw of individual devices 5. PGM Wiring PGMs switch to

Résumé du contenu de la page N° 5

TESTING & TROUBLESHOOTING Testing:  Power up system  Program options as required (See Programming Section on reverse side) Note: For advanced programming refer to the PC1616/1832/1864 Reference manual  Violate, then restore zones  Verify correct Reporting Codes are sent to the Central Station Troubleshooting: LCD5500 LCD Programmable-Message Keypad Press [✱][2] to view a trouble condition.  The trouble light will flash and the LCD will display the first trouble condition present.  Use

Résumé du contenu de la page N° 6

Trouble Cause Troubleshooting Trouble [1] Service Required Press [1] to determine specific trouble [1] Low Battery Main panel battery less than 11 VDC NOTE: If battery is new allow 1 Hr. for battery to charge.  Verify voltage measured across AC terminals is NOTE: This trouble condition will not AC. Replace transformer if required. 16-18 V clear until the battery voltage is  Disconnect battery wire leads 12.5VDC min., under load.  Verify battery charging voltage measured across bat

Résumé du contenu de la page N° 7

Trouble Cause Troubleshooting Trouble [2] AC Failure No AC at panel AC input Verify voltage measured across AC terminals is 16-18VAC. terminals Replace transformer if required. Trouble [3] Telephone Line Trouble Phone Line Voltage at TIP, RING on  Measure the voltage across TIP and RING on the panel: DC DC (approx) main panel less than 3V  No phone off-hook – 50V  Any phone off-hook – 5VDC (approx)  Wire incoming line directly to TIP and RING.  If trouble clears, check wiring or the RJ-

Résumé du contenu de la page N° 8

Trouble Cause Troubleshooting Trouble [5] Zone Fault (Cont.) One or more wireless devices have  If the trouble occurs immediately, a conflict with a hard not checked in within the wired zone exists: programmed time  The zone being used is already assigned to a PC5108 zone expander  The zone being used is assigned as a keypad zone  Perform a Module Placement Test – Program Section [904] and verify the wireless device is in a good location.  If bad test results occur, test th

Résumé du contenu de la page N° 9

PROGRAMMING the required data. The Ready light will turn OFF and the Armed light How to Program: will turn ON. At any time the [#] can be pressed to exit any program section. All DSC recommends filling in the Programming Worksheet with the required changes made up to that point will be saved. programming information before programming the system. This will reduce the time required to program and will help eliminate errors. HEX (or hexadecimal) digits are sometimes required. To enter a HEX

Résumé du contenu de la page N° 10

[402] Downloading Computer Phone Number (32-digits) KEYPAD FUNCTION KEY DEFINITIONS 00 Null Key (Key not used) 17 [][0] Activate Stay/Away IDII___II___II___II___II___II___II___II___II___II___II___II___II___II___II___I 01 Partition 1 Select 18 Identified voice prompted 02 Partition 2 Select help I___II___II___II___II___II___II___II___II___II___II___II___II___II___II___II___I 03 Stay Arm 19 Command output 3 [73] 04 Away Arm 20 Not used [403] Downloading Access Code 05 [][9] No e

Résumé du contenu de la page N° 11

[005] System Times [013] – First System Option Code This section programs the entry and exit delays for the control panel. The first two toggle options in this section are used to determine what After entering section [005] press [1] to select partition 1. type of EOL resistors are being used, toggle option [1] to determine if Enter the 3-digit delay time for Delay 1 type zones, Delay 2 type zones normally-closed or EOL resistors are being used and option [2] to followed by the exit delay tim

Résumé du contenu de la page N° 12

[310]-[311] Partition Identifier Codes [380] – First Communicator Option Codes Enter a 6 digit Maintenance Code Opt Default Description [310 System Acct. Code I___II___II___II___II___II___I 1 I__I  ON Communications Enabled [311] Partition 1 Acct. Code I___II___II___II___I OFF Communications Disabled [350] – Communicator Format Options 2 I__I ON Restorals on Bell Time-out This section determines the communication format used for central station reporting. From the chart listed below program

Résumé du contenu de la page N° 13

LISTING REQUIREMENTS UL Listed Commercial and Residential Installations User Information The installer should advise the users and note in the User’s Manual: The installation requirements listed below must be met for the following grades of service. Service organization name and telephone number Grade AA Central Station and Police Connect (Standard or Encrypted Line The programmed exit time Security Service) The programmed entry time The installation must use T-Link module which communicate

Résumé du contenu de la page N° 14

PC1616/PC1832/PC1864 Installer Programming Quick Reference Chart SIA False Alarm Reduction SIA Feature Comments Range/Default Requirement Programming Section Exit Time Access to Entry and Exit delays for each partition and Bell Time Out for the system For Full or auto arming: Required [005], 3rd entry Range:45- 255 seconds (programmable) Default: 60 sec. Progress Annunciation/ Enables audible exit beeps from the keypad for the duration of exit delay Individual keypads Allowed Disable - for Silen

Résumé du contenu de la page N° 15

Note to Installers Limited Warranty This warning contains vital information. As the only individual in contact with system users, it is your respon- Digital Security Controls warrants the original purchaser that for a period of twelve months from the date of sibility to bring each item in this warning to the attention of the users of this system. purchase, the product shall be free of defects in materials and workmanship under normal use. During the war- System Failures ranty period, Digital Sec

Résumé du contenu de la page N° 16

FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved by Digital Security Controls could void Equipment Maintenance Facility your authority to use this equipment. If trouble is experienced with this equipment PC1616, PC1832, PC1864 for repair or warranty infor- This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- mation, please contact the facility indicated below. If the equipment is causing harm to the telephone an


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 DSC , a Tyco International CompanyPC1832 Manuel d'utilisation Système domestique de protection 8
2 DSC , a Tyco International CompanyPC1616 Manuel d'utilisation Système domestique de protection 12
3 DSC , a Tyco International CompanyPowerSeries Manuel d'utilisation Système domestique de protection 2
4 DSC POWERSERIES PC1832 Manuel d'utilisation Système domestique de protection 45
5 DSC POWERSERIES PC1864 Manuel d'utilisation Système domestique de protection 26
6 DSC WLS900 Manuel d'utilisation Système domestique de protection 0
7 DSC , a Tyco International CompanyPC1864 Manuel d'utilisation Système domestique de protection 12
8 3Com 1000BASE-T-GBIC Manuel d'utilisation Système domestique de protection 0
9 Sony BRCSDP12 Manuel d'utilisation Système domestique de protection 3
10 3Com TECHD-0000000122 Manuel d'utilisation Système domestique de protection 1
11 Sony SSC-M354 Manuel d'utilisation Système domestique de protection 3
12 Sony DIGITAL 8 DCR-TRV130E Manuel d'utilisation Système domestique de protection 9
13 Sony SNC-RX SNC-CS50 Manuel d'utilisation Système domestique de protection 4
14 Sony SSC-M183/M183CE/M188CE SSC-M383/M383CE/M388CE Manuel d'utilisation Système domestique de protection 10
15 Sony CD-7226 Manuel d'utilisation Système domestique de protection 1