DSC POWERSERIES PC1616 user manual

User manual for the device DSC POWERSERIES PC1616

Device: DSC POWERSERIES PC1616
Category: Home Security System
Manufacturer: DSC
Size: 0.76 MB
Added : 5/9/2013
Number of pages: 16
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for DSC POWERSERIES PC1616. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with DSC POWERSERIES PC1616.

For your convenience

If looking through the DSC POWERSERIES PC1616 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual DSC POWERSERIES PC1616 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual DSC POWERSERIES PC1616 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
DSC POWERSERIES PC1616 User manual - Online PDF
Advertisement
« Page 1 of 16 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual DSC POWERSERIES PC1616 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to DSC POWERSERIES PC1616. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

PC1616/PC1832/PC1864 STANDARD INSTALLATION GUIDE
This Installation Guide provides the basic installation, wiring and programming information required to program the PowerSeries PC1616,
PC1832 and PC1864 control panels. This guide shall be used in conjunction with the PowerSeries PC1616/1832/1864 Reference Manual
which can be obtained from your local dealer or downloaded from the DSC web site at www.dsc.com.
NOTE: All necessary information required to meet UL Listing requirements is contained

Summary of the content on the page No. 2

Hardware Installation Begin the installation by mounting the cabinet in a dry protected area with access to unswitched AC power. Install Hardware in the sequence indicated below. Do NOT apply power until installation is complete. NOTE: All wiring entry points are designated by arrows. All circuits are classified UL power limited except for the battery leads. Minimum 1/4” (6.4mm) separation must be maintained at all points between power limited and non-power limited wiring and connections. 1. K

Summary of the content on the page No. 3

Hardware Installation (Cont.) North America Only POWER LIMITED Stand Off PC Board 1. Insert Stand off into cabinet mounting hole in the Cable Tie (not supplied) recommended desired location. Snap-in- place. Cabinet 2. Position circuit board mounting holes over UA503 DSC standoffs. Press firmly Primary:120VAC/60Hz. Secondary: 16.5VDC 40VA on board to snap-in-place. PC1616/1832/1864 DSCPTD 1640U Class II Transformer WARNING: NOTE: Do not connect High Voltage. Disconnect AC Power transformer to rec

Summary of the content on the page No. 4

Hardware Installation (Cont.) 4. AUX Power Wiring The control panel can provide a maximum of 700mA of current for modules, powered detectors, relays, LED’s etc.… If the total current required exceeds 700mA an additional power supply is required (e.g.,PC5200, PC5204). See list below. NOTE: Min/max operating voltages for devices, sensors and modules is 9.5VDC - 14VDC Refer to the list of Compatible Devices on the first page for the current draw of individual devices 5. PGM Wiring PGMs switch to

Summary of the content on the page No. 5

TESTING & TROUBLESHOOTING Testing:  Power up system  Program options as required (See Programming Section on reverse side) Note: For advanced programming refer to the PC1616/1832/1864 Reference manual  Violate, then restore zones  Verify correct Reporting Codes are sent to the Central Station Troubleshooting: LCD5500 LCD Programmable-Message Keypad Press [✱][2] to view a trouble condition.  The trouble light will flash and the LCD will display the first trouble condition present.  Use

Summary of the content on the page No. 6

Trouble Cause Troubleshooting Trouble [1] Service Required Press [1] to determine specific trouble [1] Low Battery Main panel battery less than 11 VDC NOTE: If battery is new allow 1 Hr. for battery to charge.  Verify voltage measured across AC terminals is NOTE: This trouble condition will not AC. Replace transformer if required. 16-18 V clear until the battery voltage is  Disconnect battery wire leads 12.5VDC min., under load.  Verify battery charging voltage measured across bat

Summary of the content on the page No. 7

Trouble Cause Troubleshooting Trouble [2] AC Failure No AC at panel AC input Verify voltage measured across AC terminals is 16-18VAC. terminals Replace transformer if required. Trouble [3] Telephone Line Trouble Phone Line Voltage at TIP, RING on  Measure the voltage across TIP and RING on the panel: DC DC (approx) main panel less than 3V  No phone off-hook – 50V  Any phone off-hook – 5VDC (approx)  Wire incoming line directly to TIP and RING.  If trouble clears, check wiring or the RJ-

Summary of the content on the page No. 8

Trouble Cause Troubleshooting Trouble [5] Zone Fault (Cont.) One or more wireless devices have  If the trouble occurs immediately, a conflict with a hard not checked in within the wired zone exists: programmed time  The zone being used is already assigned to a PC5108 zone expander  The zone being used is assigned as a keypad zone  Perform a Module Placement Test – Program Section [904] and verify the wireless device is in a good location.  If bad test results occur, test th

Summary of the content on the page No. 9

PROGRAMMING the required data. The Ready light will turn OFF and the Armed light How to Program: will turn ON. At any time the [#] can be pressed to exit any program section. All DSC recommends filling in the Programming Worksheet with the required changes made up to that point will be saved. programming information before programming the system. This will reduce the time required to program and will help eliminate errors. HEX (or hexadecimal) digits are sometimes required. To enter a HEX

Summary of the content on the page No. 10

[402] Downloading Computer Phone Number (32-digits) KEYPAD FUNCTION KEY DEFINITIONS 00 Null Key (Key not used) 17 [][0] Activate Stay/Away IDII___II___II___II___II___II___II___II___II___II___II___II___II___II___II___I 01 Partition 1 Select 18 Identified voice prompted 02 Partition 2 Select help I___II___II___II___II___II___II___II___II___II___II___II___II___II___II___II___I 03 Stay Arm 19 Command output 3 [73] 04 Away Arm 20 Not used [403] Downloading Access Code 05 [][9] No e

Summary of the content on the page No. 11

[005] System Times [013] – First System Option Code This section programs the entry and exit delays for the control panel. The first two toggle options in this section are used to determine what After entering section [005] press [1] to select partition 1. type of EOL resistors are being used, toggle option [1] to determine if Enter the 3-digit delay time for Delay 1 type zones, Delay 2 type zones normally-closed or EOL resistors are being used and option [2] to followed by the exit delay tim

Summary of the content on the page No. 12

[310]-[311] Partition Identifier Codes [380] – First Communicator Option Codes Enter a 6 digit Maintenance Code Opt Default Description [310 System Acct. Code I___II___II___II___II___II___I 1 I__I  ON Communications Enabled [311] Partition 1 Acct. Code I___II___II___II___I OFF Communications Disabled [350] – Communicator Format Options 2 I__I ON Restorals on Bell Time-out This section determines the communication format used for central station reporting. From the chart listed below program

Summary of the content on the page No. 13

LISTING REQUIREMENTS UL Listed Commercial and Residential Installations User Information The installer should advise the users and note in the User’s Manual: The installation requirements listed below must be met for the following grades of service. Service organization name and telephone number Grade AA Central Station and Police Connect (Standard or Encrypted Line The programmed exit time Security Service) The programmed entry time The installation must use T-Link module which communicate

Summary of the content on the page No. 14

PC1616/PC1832/PC1864 Installer Programming Quick Reference Chart SIA False Alarm Reduction SIA Feature Comments Range/Default Requirement Programming Section Exit Time Access to Entry and Exit delays for each partition and Bell Time Out for the system For Full or auto arming: Required [005], 3rd entry Range:45- 255 seconds (programmable) Default: 60 sec. Progress Annunciation/ Enables audible exit beeps from the keypad for the duration of exit delay Individual keypads Allowed Disable - for Silen

Summary of the content on the page No. 15

Note to Installers Limited Warranty This warning contains vital information. As the only individual in contact with system users, it is your respon- Digital Security Controls warrants the original purchaser that for a period of twelve months from the date of sibility to bring each item in this warning to the attention of the users of this system. purchase, the product shall be free of defects in materials and workmanship under normal use. During the war- System Failures ranty period, Digital Sec

Summary of the content on the page No. 16

FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved by Digital Security Controls could void Equipment Maintenance Facility your authority to use this equipment. If trouble is experienced with this equipment PC1616, PC1832, PC1864 for repair or warranty infor- This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- mation, please contact the facility indicated below. If the equipment is causing harm to the telephone an


Alternative user manuals
# User manual Category Download
1 DSC , a Tyco International CompanyPC1832 User manual Home Security System 8
2 DSC , a Tyco International CompanyPC1616 User manual Home Security System 12
3 DSC , a Tyco International CompanyPowerSeries User manual Home Security System 2
4 DSC POWERSERIES PC1832 User manual Home Security System 45
5 DSC POWERSERIES PC1864 User manual Home Security System 26
6 DSC WLS900 User manual Home Security System 0
7 DSC , a Tyco International CompanyPC1864 User manual Home Security System 12
8 3Com 1000BASE-T-GBIC User manual Home Security System 0
9 Sony BRCSDP12 User manual Home Security System 3
10 3Com TECHD-0000000122 User manual Home Security System 1
11 Sony SSC-M354 User manual Home Security System 3
12 Sony DIGITAL 8 DCR-TRV130E User manual Home Security System 9
13 Sony SNC-RX SNC-CS50 User manual Home Security System 4
14 Sony SSC-M183/M183CE/M188CE SSC-M383/M383CE/M388CE User manual Home Security System 10
15 Sony CD-7226 User manual Home Security System 1