Résumé du contenu de la page N° 1
Camera Browser Interface
NBN-733 / NDN-733 FW5.6
en Software manual
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Camera Browser Interface Table of Contents | en 3 Table of Contents 1 Browser connection 12 1.1 System requirements 12 1.2 Establishing the connection 13 1.2.1 Password protection in camera 13 1.3 Protected network 13 2System Overview 14 2.1 Livepage 14 2.2 Recordings 14 2.3 Settings 14 3 Operation via the browser 15 3.1 Livepage 15 3.1.1 Image selection 15 3.1.2 Status icons 16 3.1.3 Cameras with PTZ control 17 3.1.4 View Control ROI 18 3.1.5 Cameras with alarm and relay I/O 19 3.1.6 System Log
Résumé du contenu de la page N° 4
4 en | Table of Contents Camera Browser Interface 5 Basic Mode 28 5.1 Device Access 28 5.1.1 Naming 28 5.1.2 Password 28 5.2 Date/Time 30 5.3 Network 31 5.4 Encoder 32 5.5 Audio 32 5.6 Recording 32 5.7 System Overview 32 6 Advanced General Settings 33 6.1 Identification 33 6.1.1 Naming 33 6.1.2 ID 33 6.1.3 iSCSI Initiator extension 33 6.2 Password 34 6.2.1 Password 34 6.2.2 Confirm password 34 6.3 Date/Time 35 6.3.1 Date format 35 6.3.2 Device date / Device time 35 6.3.3 Device time zone 35 6.3.
Résumé du contenu de la page N° 5
Camera Browser Interface Table of Contents | en 5 7.1.2 Company logo 39 7.1.3 Device logo 39 7.1.4 Show VCA metadata 39 7.1.5 Show VCA trajectories 39 7.1.6 Show overlay icons 40 7.1.7 Select video player 40 7.1.8 JPEG size, interval and quality 40 7.2 LIVEPAGE Functions 41 7.2.1 Transmit audio 41 7.2.2 Lease time [s] 41 7.2.3 Show alarm inputs 41 7.2.4 Show relay outputs 41 7.2.5 Show event log 41 7.2.6 Show system log 41 7.2.7 Allow snapshots 42 7.2.8 Allow local recording 42 7.2.9 I-frames-on
Résumé du contenu de la page N° 6
6 en | Table of Contents Camera Browser Interface 8.3.2 Mode ID 47 8.3.3 Copy mode to 47 8.3.4 Restore Mode Defaults 47 8.7 Color 52 8.7.1 White balance 52 8.8 ALC 53 8.8.1 Exposure/frame rate 53 8.8.2 Day/night 54 8.9 Enhance 55 8.9.2 Sharpness level 55 8.9.3 Backlight Compensation 55 8.9.5 Contrast enhancement 55 8.9.6 Intelligent DNR 55 8.9.7 Temporal noise filtering 56 8.9.8 Spatial noise filtering 56 8.10 Encoder Settings 57 8.11 Privacy Masks 58 8.12 Audio 58 8.13 Pixel Counter 58 9 Encode
Résumé du contenu de la page N° 7
Camera Browser Interface Table of Contents | en 7 10 Recording 67 10.1 Storage Management 69 10.1.1 Device manager 69 10.1.2 Recording media 69 10.1.3 Activating and configuring storage media 71 10.1.4 Formatting storage media 72 10.1.5 Deactivating storage media 72 10.2 Recording Profiles 73 10.2.1 Recording track selection 74 10.2.2 Standard recording 74 10.2.3 Alarm recording 75 10.3 Retention Time 75 10.4 Recording Scheduler 76 10.4.1 Weekdays 76 10.4.2 Holidays 76 10.4.3 Profile names 77 10
Résumé du contenu de la page N° 8
8 en | Table of Contents Camera Browser Interface 11.3.2 Name 83 11.3.3 Signal Ranges 83 11.3.4 Threshold 83 11.3.5 Sensitivity 83 11.4 Alarm E-Mail 84 11.4.1 Send alarm e-mail 84 11.4.2 Mail server IP address 84 11.4.3 SMTP user name 84 11.4.4 SMTP password 84 11.4.5 Format 84 11.4.6 Image size 84 11.4.7 Attach JPEG from camera 85 11.4.8 Destination address 85 11.4.9 Sender name 85 11.4.10 Test e-mail 85 11.5 Alarm Task Editor 86 12 Setting up VCA 87 12.1 VCA - Silent VCA 87 12.2 VCA - Profiles
Résumé du contenu de la page N° 9
Camera Browser Interface Table of Contents | en 9 13.2.1 Idle state 97 13.2.2 Operating mode 97 13.2.3 Relay follows 97 13.2.4 Relay name 97 13.2.5 Trigger relay 97 13.3 COM1 98 13.3.1 Serial port function 98 13.3.2 Camera ID 98 13.3.3 Baud rate 98 13.3.4 Data bits 98 13.3.5 Stop bits 98 13.3.6 Parity check 98 13.3.7 Interface mode 98 14 Network 99 14.1 Network Access 99 14.1.1 Automatic IP assignment 99 14.1.2 IP V4 address 99 14.1.3 IP V6 address 100 14.1.4 DNS server address 100 14.1.5 Video
Résumé du contenu de la page N° 10
10 en | Table of Contents Camera Browser Interface 14.1.22 Status 103 14.2 Advanced 104 14.2.1 SNMP 104 14.2.2 1. SNMP host address / 2. SNMP host address 104 14.2.3 SNMP traps 104 14.2.4 Authentication (802.1x) 105 14.2.5 RTSP port 105 14.2.6 UPnP 105 14.2.7 TCP metadata input 105 14.2.8 Quality of service 105 14.2.9 Cloud-based services 106 14.3 Multicast 107 14.3.1 Enable 107 14.3.2 Multicast Address 107 14.3.3 Port 108 14.3.4 Streaming 108 14.3.5 Multicast packet TTL 108 14.4 Image Posting 1
Résumé du contenu de la page N° 11
12 en | Browser connection Camera Browser Interface 1 Browser connection A computer with Microsoft Internet Explorer is used to receive live images from the camera, control the camera, and replay stored sequences. The camera is configured over the network using the browser. 1.1 System requirements – Network access (Intranet or Internet) – Microsoft Internet Explorer version 9 – Screen resolution at least 1024 × 768 pixels – 16- or 32-bit color depth – Sun JVM installed The Web browser must
Résumé du contenu de la page N° 12
Camera Browser Interface Browser connection | en 13 1.2 Establishing the connection The camera must have a valid IP address to operate on your network and a compatible subnet mask. By default, DHCP is pre-set at the factory to ON and so your DHCP server assigns an IP address. With no DHCP server the default address is 192.168.0.1 1. Start the Web browser. 2. Enter the IP address of the camera as the URL. 3. During initial installation, confirm any security questions that appear. Note: If y
Résumé du contenu de la page N° 13
14 en | System Overview Camera Browser Interface 2 System Overview When a connection is established, the Livepage is initially displayed. The application title bar displays three items: LIVEPAGE, PLAYBACK, SETTINGS. Note: The PLAYBACK link is only visible if a storage medium has been configured for recording. (With VRM recording this option is not active.) 2.1 Livepage The LIVEPAGE is used to display the live video stream and control the camera. 2.2 Recordings The PLAYBACK page is used for
Résumé du contenu de la page N° 14
Camera Browser Interface Operation via the browser | en 15 3 Operation via the browser 3.1 Livepage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser window. Depending on the configuration, various text overlays may be visible on the live video image. Other information may also be shown next to the live video image. The items shown depend on the settings on the LIVEPAGE Functions page. Figure 3.1 Livepage 3.1
Résumé du contenu de la page N° 15
16 en | Operation via the browser Camera Browser Interface 3.1.2 Status icons Various overlays in the video image provide important status information. The overlays provide the following information: Decoding error The frame might show artefacts due to decoding errors. If other frames reference this frame, they might also show decoding errors but won’t be marked with the icon. Alarm flag Shown on a media item to indicate an alarm. Communication error A communication error, such as a connec
Résumé du contenu de la page N° 16
Camera Browser Interface Operation via the browser | en 17 Motion flag Indicates that motion is dectected. Storage discovery Indicates that recorded video is being retrieved. 3.1.3 Cameras with PTZ control For cameras where PTZ control is possible, the View Control panel is activated. Pan and tilt To control the pan and tilt of PTZ cameras: Click and hold the up or down arrows to tilt. Click and hold the left or right arrows to pan. Click and hold the center area to control both. Move
Résumé du contenu de la page N° 17
18 en | Operation via the browser Camera Browser Interface Pre-position To move the camera to a pre-position, click one of the buttons numbered one to six. To store the current position of the camera in a pre-position: 1. Position the camera. 2. Enter a pre-position number. 3. Click Set. 3.1.4 View Control ROI When the stream 2 encoder stream is set for Region of Interest (ROI), a specific type of View Control panel is activated. Refer to Section 9.3 Encoder Regions, page 66 for more informa
Résumé du contenu de la page N° 18
Camera Browser Interface Operation via the browser | en 19 Set positions To store the current view: 1. Select a region of interest. 2. Click Set. 3. Click a number. To display a pre-set region of interest, click one of the buttons numbered one to six. Tracking For cameras with the ability to track movement, options for tracking objects within the region of interest are displayed in the Tracking panel. When on, the tracking icon is displayed on the image together with the lines that track m
Résumé du contenu de la page N° 19
20 en | Operation via the browser Camera Browser Interface 3.1.6 System Log / Event Log The System Log field contains information about the operating status of the camera and the connection. Events such as the triggering or the end of alarms are shown in the Event Log field. To view, filter and save these messages to a file, click in the top right-hand corner. To clear the log, click in the top right-hand corner of the relevant field. 3.1.7 Saving snapshots Individual images from the
Résumé du contenu de la page N° 20
Camera Browser Interface Operation via the browser | en 21 3.1.9 Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording. The icon lights up and displays a moving graphic to indicate a running recording. If no recording is taking place, a static icon is displayed. 3.1.10 Audio communication Audio can be sent and received via the Livepage if the active monitor and the remote station of the camera support audio. 1. Press an
