Résumé du contenu de la page N° 1
Instruction Manual
Model#: 111211
Lit. #: 98- 0921/03-07
ImageView 111211 1LIM draft.indd1 1 3/12/07 4:01:02 PM
Résumé du contenu de la page N° 2
WARNING Make sure you download any pictures from your camera BEFORE removing or changing batteries, unless you have been using an SD card rather than the internal memory for photo storage. We recommend you download all current photo files for safekeeping before storing the ImageView away if you are not using an SD card in the camera, in case the batteries become depleted during extended storage. WARNING Do NOT look directly a
Résumé du contenu de la page N° 3
® Congratulations on your purchase of the Bushnell ImageView binocular! The Bushnell ImageView binocular takes the technology of digital photography and combines it with a high-quality compact binocular. This allows you to observe sporting events, wildlife, scenic vistas or anything you would normally use a binocular for, and then save the image in a built-in attached digital camera. You can then download these images to your c
Résumé du contenu de la page N° 4
Camera and BinocularP artsG uide 4-Way Snap STN Keypad Button Display Diopter Adjust Remote Card USB Jack Slot Port Tripod Socket Battery Binocular Compartment Focus Mode/Power (Slide Open In Button Direction of Arrow) ImageView 111211 1LIM draft.indd4 4 3/12/07 4:01:03 PM
Résumé du contenu de la page N° 5
CAMERA PARTS Setup and Basic Operation 1.The camera is powered by two AAA alkaline, lithium, or NiMh batteries (not included). Insert batteries into the compartment, with the springs in contact with the negative (flat) end of each battery. A meter on the display will indicate battery condition when the camera is in use. 2. Insert an SD card ("upside down" with metal contacts facing up) in the card slot if expanded file storage is desired. Gently push the card in until it stops. To remove, sim
Résumé du contenu de la page N° 6
Usingthe Optional Settings and SpecialF eatures Your ImageView is already set to high resolution and quality right out of the box, and it is not necessary to make any special setting-you will normally get good photos by simply pressing the SNAP button. However, as you might want to shoot a video clip, delete a previous photos, or explore other options, we recommend you review the available optional settings listed on the following pages. To see and set these optional settings and speci
Résumé du contenu de la page N° 7
Usingthe Optional Settings and SpecialF eatures To change settings such as resolution and quality, press the MODE button once so that the main screen is displayed. Next, press the "down" button on the 4-way keypad. You will see the first setting screen, resolution. You have two options, high (VGA-recommended) or low resolution. To toggle between these two settings, press the "up" button on the 4-way keypad. The icon for resolution will change from two stars (high res) to one star (low r
Résumé du contenu de la page N° 8
Special Features Mode Icon Settings Description Self-Timer Clock 10 sec delay Press SNAP while clock icon is showing, a photo will be taken after approx. 10 sec delay. This can be used to avoid accidently shaking the camera when the SNAP button is pressed. If the remote shutter cable is available, it should be used instead of the self timer when the camera is tripod mounted. The timer automatically cancels after use. Video Video 320x240 pixels per Press SNAP while the video cam icon is sh
Résumé du contenu de la page N° 9
Settings/Options (Bold indicates default settings) Mode Icon Settings Description Resolution 2 Stars High (640x480 Select High (recommended) or Low resolution, (High) or 1 pixels), Low based on your preference for better looking photos Star (Low) (320x240 pixels) (High) or being able to take a greater number of photos (Low). Quality HQ or SQ High, Standard Select "HQ" (recommended) or "SQ" quality to choose the amount of file compression, which af- fects the size of the photo file. "SQ" all
Résumé du contenu de la page N° 10
USING THE IMAGEVIEW WITH YOUR COMPUTER: 1. The camera will be recognized as a USB mass storage device (if it is set to "STO" and not "PC"), which means no special drivers are required for all operating systems later than Windows 98 (Me, 2000, XP, Vista.) Mac OS 9 and OSX are also compatible. If you have a PC running Windows 98, you must install the driver found on the included CD-ROM BEFORE CONNECTING THE CAMERA TO YOUR PC. 2. If you have a computer OS as listed above that is USB mass stor
Résumé du contenu de la page N° 11
System Requirements (Minimum) OS: Windows® 98/98SE/2000/ME/XP/Vista (PhotoSuite 5 is not compatible with Vista) CPU: MMX Pentium® 200MHZ equivalent or faster (Pentium® III 500 MHz for PhotoSuite5™) Memory: 32MB minimum (64MB recommended for PhotoSuite) SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color 200 MB available hard disk space (if installing PhotoSuite) Internal USB Port Software Installation If you are using Windows 98, you must install drivers before connectin
Résumé du contenu de la page N° 12
Transferring The Photos & Videos to Your PC continued 3. The LCD display will indicate “USB” along with a hard drive icon, and the ImageView will be recognized as a standard “USB Mass Storage” device. This means that the camera files can be easily viewed, edited, or copied to your hard drive, just as if they were stored on an external hard drive or a CD-ROM. 4. (This step is not required with Windows XP, simply use the options in the pop-up window to view, copy or edit your photos). Open
Résumé du contenu de la page N° 13
Transferring The Photos & Videos to Your PC continued 7. You’re now ready to open the photo files in any photo editing software. Just use File>Open and go to the folder where you stored the photos earlier. If you are using PhotoSuite, select File>Open Photo, then use the “Look in” pull down menu at the top of the Open window, select “My Computer”, select your hard drive, and double click any photo in the folder where you copied the files from the camera. It is also possible to open and work
Résumé du contenu de la page N° 14
BINOCUlAR INSTRUCTIONS Your Bushnell binocular is a precision instrument designed to provide many years of pleasurable viewing. This portion of the booklet will help you achieve optimum performance by explaining how you can adjust the binocular to your eyes, and how to care for this instrument. Read the instructions carefully before using your binocular. EYE ADJUSTMENTS (Figure 1) Fig. 1 How to Adjust For Distance Between Your Eyes The distance between the eyes, called “interpupillary dis
Résumé du contenu de la page N° 15
FOCUSING 1. Adjust interpupillary distance. (Figure 1) Fig. 2. Set the “diopter setting” (Figure 2) to zero and view a distant object. 3. Keep both eyes open at all times. 4. Using a lens cover or your hand, cover the objective (front) lens of the same side of the binocular that has the “diopter setting.” This is usually Diopter setting the right side. (The left side on zoom models.) 5. Using the center focus wheel, focus on a distant object with fine detail (e.g., brick wall, tree bra
Résumé du contenu de la page N° 16
INSTRUCTIONS FOR CARE OF BINOCUlARS Your Bushnell binocular will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument. The Imageview is not waterproof, and should not be exposed to any source of moisture. Water damage is not covered by the warranty. 1. If your binocular has roll-down, flexible eyecups, store it with the eyecups up. This avoids excessive stress and wear on the eyecups in the down position. 2. Avoid banging and droppi
Résumé du contenu de la page N° 17
TWO-Y EAR LIMITED WARRANTY FCCN ote: ® This equipment has been tested and found to comply Your Bushnell product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace with the limits for a Class B digital device, pursuant the product, provided that you return the product postage prepaid. This warranty does not cover damages to Part 15 of the FCC Rules. T
Résumé du contenu de la page N° 18
NOTES ImageView 111211 1LIM draft.indd18 18 3/12/07 4:01:07 PM
Résumé du contenu de la page N° 19
ImageView 111211 1LIM draft.indd19 19 3/12/07 4:01:07 PM
Résumé du contenu de la page N° 20
For further questions or additional information please contact: Bushnell Outdoor Products 9200 Cody, Overland Park, Kansas 66214 (800) 423-3537 • www.bushnell.com ©2007 Bushnell Outdoor Products ImageView 111211 1LIM draft.indd20 20 3/12/07 4:01:08 PM
