Résumé du contenu de la page N° 1
Professional Disc Jockey Products
DM3000X/DM3002X
DJ MIXERS
Owner’s Manual
©2001 Industries http://www.numark.com
Résumé du contenu de la page N° 2
DM3000X/DM3002X h) Power Sources - This product should be connected to a Safety Information power supply only of the type described in these operating instructions, or as marked on the unit. i) Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord. j) Object and Liquid Entr
Résumé du contenu de la page N° 3
DM3000X/DM3002X VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. • Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty
Résumé du contenu de la page N° 4
DM3000X/DM3002X DM3000X/DM3002X PROFESSIONAL DJ MIXERS CONGRATULATIONS! You have purchased the DM3000X/DM3002X Stereo Mixer by . This mixer was developed by DJs for you combining requested features in an easy to understand layout. Using the latest in circuit design technology and our history of award winning development experience you can expect years of reliable service from this product. Careful attention to detail was provided in this unit. The DM3000X/DM3002X even has smooth edges to
Résumé du contenu de la page N° 5
DM3000X/DM3002X TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Description of the Features 6 Quick Setup Diagram 9 Block Diagram 10 Specifications 11 Warranty 12 - The Leader in DJ Technology ©2001 Industries - 5 - http://www.numark.com
Résumé du contenu de la page N° 6
DM3000X/DM3002X 27 28 26 5 3 5 15 6 16 8 11 4 7 12 10 13 2 1 24 21 22 17 20 18 14 9 23 19 25 - The Leader in DJ Technology ©2001 Industries - 6 - http://www.numark.com
Résumé du contenu de la page N° 7
DM3000X/DM3002X MIXER FEATURES INPUTS CROSSFADER 1. Input faders - control individual source levels in the mix. 17. Crossfader - achieves clean segues between the two input channels 2. Input Toggle Switch (Transform) - selects which source will be live to selected by the Crossfader Assign. that channel based on what you have connected to the rear panel input 18. Crossfader Slope – determines how quickly the audio from the section. By removing the face panel the switch can be rotated into any op
Résumé du contenu de la page N° 8
DM3000X/DM3002X REAR PANEL FEATURES 4 10 7 3 5 2 6 5 3 1 9 8 1. Power Input - to plug your power plug in before switching on power. See safety precautions on page 3 for proper treatment of power. 2. Voltage Selector – Set this to the appropriate power for your location. If unsure ask your authorized dealer. 3. Phono Inputs – plug your turntables in here. 4. Ground lug - use these connections with your turntables’ grounding cable to avoid signal hum. 5. Line Inputs - to connect stereo audio fr
Résumé du contenu de la page N° 9
DM3000X/DM3002X QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, th
Résumé du contenu de la page N° 10
DM3000X/DM3002X BLOCK DIAGRAM - The Leader in DJ Technology ©2001 Industries - 10 - http://www.numark.com
Résumé du contenu de la page N° 11
DM3000X/DM3002X SPECIFICATIONS Inputs: Line: 10K ohm input impedance 83mV rms sensitivity for 1.22V output Mic: 600 ohm input impedance unbalanced 1mV rms sensitivity for 1.22V output 65mV rms max input Phono: 47Kohm input impedance 1.3mV rms sensitivity @ 1KHz for 1.22V output Outputs: Line: 9V rms max Headphone: 0.5W into 47ohm Distortion: less than 0.01% Signal to Noise Ratio: (maximum output) JIS-A weighted Line: Better than 92dB Mic: Better than 82dB Phono: Better than 85dB Frequency respon
Résumé du contenu de la page N° 12
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK products; including but not limited to DJ mixers, amplifiers, CD players, CD Mix Stations, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, cartridges, and all other accessories; are to be free from defects in material and workmanship under normal use and service for the period commencing upon t
