Instruction d'utilisation Samson CHANNEL MIXER

Résumé du contenu de la page N° 1

S Class Signal P r oc essors
010010010010
5 CHANNEL MIXER

Résumé du contenu de la page N° 2

Table Of Contents Introduction and Features 3 Front and Rear Panel Layout 4 Operating the S mix Setting up the S mix 5 Connecting the Input Signals 6 Typical Set-up 7 Creating a mix 7 Specifications 8 Wiring Guide 8 Copyright 2003, Samson Technologies Corp. Printed January 2003 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www.samsontech.com A K-TEAM PRODUCTION

Résumé du contenu de la page N° 3

S mix Introduction and Features Thank you for purchasing the S mix, miniature mixer by Samson Audio! The S mix is a 5-channel compact mixer packed with high-end mixer features. The S mix features a balanced microphone input on an XLR connector and includes phantom power for connecting condenser microphones. Adding to the mix are two Super-Z, high imped- ance line inputs on 1/4” connectors. Rounding out the inputs is a stereo channel with two inputs on RCA connectors. Individual volume controls f

Résumé du contenu de la page N° 4

S mix Front and Rear Panel Layout Front Panel Layout 1 2 3 45 6 3 CHANNEL 3 VOLUME - Control knob used to adjust the level of input 3. 4 CHANNEL 2 VOLUME - Control knob used to adjust the level of input 2. 1L & R RCA OUTPUT - Left and Right 5 CHANNEL 1 VOLUME - Control main mix OUTPUT on RCA con- knob used to adjust the level of nectors. input 1. 2 CHANNEL 4/5 VOLUME - Control 6 TRS OUTPUT - Left and Right knob used to adjust the level of main mix OUTPUT on TRS inputs 4 and 5. (TIP/RING/SLEEVE)

Résumé du contenu de la page N° 5

Operating the S mix Setting up the S mix The basic procedure for setting up and using your S mix miniature mixer takes only a few minutes. Remove all packing materials (save them in case of need for future service) and check to make sure that you remove the supplied AC/DC power adapter. Note:Before plugging in and turning on, remember the “last on, first off” rule of power ampli- fiers and powered speakers. When powering up your system, be sure that all the wires are con- nected, turn your mixer

Résumé du contenu de la page N° 6

Operating the S mix Connecting Inputs Signals to the S mix The S mix provides the capability of receiving signals from microphone, instrument and line level devices. Super-Z Line Inputs Channel 1 and 2 inputs are Super-Z, line/instrument level inputs on 1/4-inch phone con- nectors. The inputs can accept the signal from a variety of instruments level sources like those from the outputs of guitars, bass guitars and clavinets, and line level signals like those from the outputs MIDI keyboards, sig

Résumé du contenu de la page N° 7

1 2 Rv N O S M A S Operating the S mix Typical Set-up The diagram below shows a typical set-up for a small band using the S mix miniature mixer. The vocalist’s microphone is connected to the channel 3 mic input, a bass guitar is connected to channel 2 and channel 1 has a keyboard connected. For background tracks, a CD player is connected to the channel 4/5’s stereo RCA inputs. Creating a Mix Now that you have connected your instruments and other sound sources to the S mix inputs you can begin to

Résumé du contenu de la page N° 8

S mix Specifications S mix Specifications - continued Frequency Response 10 Hz to 95 kHz Mono, Instrument Level Output 1/4”, unbalanced THD+N <0,005 % Input Impedance (Inst Chn.) 1 Meg Ohm Noise Level -105 dBu Output Impedance 100 Ohm Microphone Input XLR, balanced Maximum Input Level +21 dBu Super-z Line Input 1/4” jack unbalanced Power Supply 18 V DC Left and Right Inputs RCA, unbalanced input Dimensions 5.65” L x 4.13” W x 2” H Left and Right Outputs RCA, unbalanced output (144mm L x 105