Résumé du contenu de la page N° 1
OWNER’S MANUAL
STAGE PIANO
EN
Résumé du contenu de la page N° 2
SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic ENVIRONMENTAL ISSUES: Yamaha strives to produce products may have either labels similar to the graphics products that are both user safe and environmentally shown below or molded/stamped facsimiles of these graph- friendly. We sincerely believe that our products and the pro- ics on the enclosure. The explanation of these graphics duction methods used to produce them, meet these goals. In appears on this page. Please observe al
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. WARNING- When using any electrical or electronic product, 8. This product was NOT designed for use in wet/damp loca- basic precautions should always be followed. These precautions tions and should not be used near water or exposed to rain. Exam- include, but are not limited to, the following: ples of wet/damp locations are; near a swimming pool,
Résumé du contenu de la page N° 4
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord Water warning • Only use the voltage specified as correct for the instrument. The required • Do not expose
Résumé du contenu de la page N° 5
Connections • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Maintenance • When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use paint thinner
Résumé du contenu de la page N° 6
Introduction Introduction Thank you for choosing the Yamaha Stage Piano CP300. The CP300 features exceptionally high-quality sound, comprehensive features and a variety of editing functions—making it suitable for a wide range of applications, including live performance and recording. We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the CP300. We also recommend that you keep this manual in a safe and handy place
Résumé du contenu de la page N° 7
Supplied Accessories • Power cord • Foot pedal (FC3) • Owner’s Manual Main Features The CP300 gives you the ultimate acoustic grand piano sound—utilizing three-stage dynamic sampling, providing the ability to change tone with the sustain pedal, and adding a subtle, authentic release sound when you lift your fingers from the keys. Among the advanced features are: • 88-key “Graded Hammer” keyboard with action that is virtually indistinguishable from an actual acoustic piano. •Sophisticated AWM s
Résumé du contenu de la page N° 8
Introduction Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Application Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Before Using the CP300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Power Supply Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using the Pedals . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 9
MIDI Panic Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Built-in Speakers On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Reference Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Master Settings—Master Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Detailed Settings for the Voices—Voice Edit . . . . . . . . . . . . . . . . . . . . 56 Voice
Résumé du contenu de la page N° 10
Introduction Application Index Listening • Listening to Demo Songs with different Voices . . . . . . . . . . . . . .“Listening to the Demo Songs” on page 23 • Listening to your recorded performance . . . . . . . . . . . . . . . . . . . . . . . . . . “Playing Back a Song” on page 49 Playing • Selecting and playing Voices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “Playing Voices” on page 25 • Selecting and playing Performances . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 11
Before Using the CP300 Power Supply Connections 1 Make sure that the instrument’s [POWER] switch on the rear panel is at the OFF position. POWER POWER OFF!! ON OFF 2 Connect the supplied power cord to the [AC INLET] jack (page 22) on the instrument’s rear panel. 3 Connect the other end of the power cord to an AC outlet. Make sure your CP300 meets the voltage requirement for the country or region in which it is being used. AC INLET jack Power cord (included) Using the Pedals Connect the inc
Résumé du contenu de la page N° 12
Introduction Before Using the CP300 Using Headphones If you are using a set of headphones, connect them to the [PHONES] jack. PHONES jack CAUTION Do not use headphones at a high volume for an extended period of time. Doing so may cause hearing loss. n If the [SPEAKER] button is lit, this indicates that the built-in speakers sound normally when using the headphones. Turning the Power On Make sure the volume setting of the CP300 and external devices are turned down to the minimum. Press the [
Résumé du contenu de la page N° 13
Before Using the CP300 Adjusting the Brightness of the Display You can adjust the contrast of the display by turning the [CONTRAST] knob located to the right of the LCD. A B CONTRAST Grand Piano 1 NO YES EXIT C D Setting the Volume To adjust the volume, use the [MASTER VOLUME] dial located at the left of the panel. When you start playing, re-adjust the [MASTER VOLUME] dial to the most comfortable listening level. The level The level decreases. increases.
Résumé du contenu de la page N° 14
Introduction Playing the keyboard Playing the Sounds Try playing some of the realistic and dynamic CP300 sounds from the keyboard now. When you turn the power on following the directions in “Power Supply Connections” (pages 11 and 12), the display below appears. A B Grand Piano 1 NO YES C D In this condition, you can play the keyboard and hear the sound of the selected “Grand Piano 1” Voice. To change the Voice, press any one of the Voice group buttons lo
Résumé du contenu de la page N° 15
Basic Operation In this section you’ll learn about the fundamental operations of the CP300—the use of the panel buttons and controls and how to restore the CP300’s memory to the factory default settings. Display Settings—Basic Operation Each function may have many items or parameters from which you can choose. To select an item or parameter, press one of the A [–][+] – D [–][+] buttons. Each parameter in the display corresponds to the A [–][+] – D [–][+] buttons next to it. A B GrandPian
Résumé du contenu de la page N° 16
Introduction Basic Operation Restoring the Factory-programmed Settings of the CP300 The CP300 has a Factory Set function for restoring your CP300’s memory to the factory default settings. This lets you restore the CP300’s default Voices and Performances, as well as its System and other settings. Refer to “Factory Setting List” on page 101. There are two ways you can restore the CP300’s memory to the factory default settings: 1) Set the “Factory Set” parameter in the Other Settings menu, or 2
Résumé du contenu de la page N° 17
Basic Operation 4 Press the B [+ (YES)] button to execute the job. After the job has been completed, a “Completed” message appears and operation returns to the original display. CAUTION For Factory Set operations that take longer to process, you will see the message “Executing” during processing. Do not switch the power off while this message is on the display. Turning the power off in this state may cause the system to freeze. Terminology File: A file contains various data in a group. A fil
Résumé du contenu de la page N° 18
Introduction Basic Instructions Turning the Power On Selecting and Playing a Voice The CP300 features an exceptionally wide variety of Preset Voices First, turn the power on and set for playing in virtually any musical style. Try searching through up the keyboard before playing. the Voices to find your favorites. • Before Using the CP300 (pages 11 and 12) • Selecting a Voice (page 25) Terminology POWER Preset: Refers to data loaded to the internal memory of the CP300 ON! before being shi
Résumé du contenu de la page N° 19
Basic Instructions Recording Your Performance and Playing It Back Recording and playing back your performance is exceptionally easy. The CP-300 allows you to record up to sixteen independent parts, letting you record the left- and right-hand parts separately—and lets you build up a complete, multi-instrument Song by recording each part one-by-one. • Recording Your Performance (page 42) • Other Recording Techniques (page 46) • Handling Song Files (page 81) • Playing Back Songs (page 49) T
Résumé du contenu de la page N° 20
Basic Operation Control Names and Functions Basic Operation Control Names and Functions Front Panel 5 6 7 8) @ $ & (º ™ £ TRACK ZONE 1 ZONE 2 ZONE 3 ZONE 4 SONG FILE MIDI OUT PANEL LOCK MASTER PERFORMANCE TRANSPOSE 12 3-16 A SONG SELECT REC STOP PLAY/PAUSE 4 MASTER EDIT PERFORM.FILE SONG SETTING DOWN UP POWER NEW SONG SYNCHRO START TEMPO C MIN MAX ON OFF SONG MASTER VOLUME VOLUME ZONE CONTROL SONG 9! # % ^ * ¡ 12 3 PHONES A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2
