Résumé du contenu de la page N° 1
Quick Installation Guide
Wireless Printer Adapter
Model: WP-SA
INTRODUCTION
Thank you for purchasing AmbiCom’s Wireless Printer Adapter. AmbiCom’s Wireless Printer
Adapter offers the ideal solution for wireless connectivity between common PCs and USB inkjet
printers. The Wireless Printer Adapter enables the user to expand an existing Wireless Printer
network installation to wirelessly connect up to 30 additional PC systems and laptops to a shared
printer.
IMPORTA
Résumé du contenu de la page N° 2
Product Illustrations Connects between Adapter A and the Extension Cable Green LED Light Slave USB Extension Cable Slave Adapter for PCs Connects to PC’s USB Port WP-SA Quick Installation Guide v.1.0 Page 2
Résumé du contenu de la page N° 3
Additional Slave PC Adapter Installation This section provides installation procedures for users with existing AmbiCom Wireless Printer setup to add addition Slave PC Adapter. You can add up to 30 Slave PC Adapters to one Master Printer Adapter. However, during normal operations, only ONE Slave PC Adapter will be able to connect to the printer at a time. Mac Users : The instructions in this section apply to both PCs and Macs as long as you install the USB driver to your printer acco
Résumé du contenu de la page N° 4
6. Plug the new Slave PC Adapter into an available USB port on the PC to be added to the Wireless Printer Network. The green LED light on the new Slave PC Adapter will blink once and then remain off. New Slave PC Adapter 7. Connect the AC power plug into Master Printer Adapter. At this time, the green LED light on the Master Printer Adapter will blink once and remain off. When both Master Printer Adapter and Slave PC Adapter have detected each other, the LED lights on the Maste
Résumé du contenu de la page N° 5
INSTALLATION CONSIDERATIONS Important considerations must be followed for the successful installation of additional Slave PC Adapters to an existing Wireless Printer Network installation: • The installation of a new Slave PC Adapter can only be made with one Master Printer Adapter at a time. • Successful searching and pairing cannot be accomplished if a Master Printer Adapter, other than the one being used during the installation procedures above, is unplugged from its printer’s U
Résumé du contenu de la page N° 6
WP-SA Quick Installation Guide v.1.0 Page 6
Résumé du contenu de la page N° 7
TROUBLESHOOTING If you encounter any problems during the installation process, please refer to the following table for possible solutions. Problem Possible Solutions 1. The installation wizard cannot find the • Unplug the AC power adapter for the Master Printer USB printer/connection during the Adapter from the power outlet, unplug and re-plug the USB driver installation. Slave PC Adapter from/to the PC, and re-plug the AC power adapter into the power outlet to reset the link.
Résumé du contenu de la page N° 8
Problem Possible Solutions 6. The directions in this installation guide • Unplug the AC power adapter for the Master Printer were followed, but the Slave PC Adapter from the power outlet, unplug and re-plug the Adapter did not pair with the Master Slave PC Adapter from/to the PC, and re-plug the AC Printer Adapter. power adapter into the power outlet. Repeat instructions from the beginning of the installation guide. WP-SA Quick Installation Guide v.1.0
Résumé du contenu de la page N° 9
Technical Support If you have any questions or problems installing the Wireless Printer Adapter, please contact Technical Support. Hours: 9 a.m. to 6 p.m. M-F E-mail: support@ambicom.com Tel: (408) 562-0168 Fax: (408) 562-0178 WP-SA Quick Installation Guide v.1.0 Page 9
Résumé du contenu de la page N° 10
Warranty 1 Year Warranty As the original purchaser, you receive a 1-year warranty from AmbiCom: This warranty gives you specific legal rights. Yo u may also have other rights that vary from state to state. 1 Year Limited Warranty: AmbiCom, Inc. warrants its WP-SA products to be free from defects in materials and workmanship, under normal use and service, for 1 year from the date of purchase from its Authorized Reseller. During the warranty period, AmbiCom will, at its option, ei
Résumé du contenu de la page N° 11
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection a
